アメリカ合衆国

証券取引委員会

ワシントン D. C. 20549

形式 10-K/A

(修正案 No. 4 ）

(Mark（ 1 ）

本財政年度末まで十二月三十一日, 2023

OR

手数料書類番号001-39489

NUBURU 株式会社

(登録者の正確な氏名はその定款に記載)

登録者の電話番号、市外局番を含む：(720) 767-1400

同法第12条(B)に基づいて登録された証券：

同法第12条(G)に基づいて登録された証券：なし

登録者が証券法第 405 条で定義されているように、よく知られた経験豊富な発行者であるかどうかをチェックマークで示します。はい ↓ ↓ No 」と

登録者がこの法第13又は15(D)条に従って報告書を提出する必要がないか否かを、再選択マークで示すはい ↓ ↓ いいえ 」と

登録者が(1)過去12ヶ月以内(または登録者がそのような報告を提出する必要があるより短い期間)に1934年の証券取引法第13条または15(D)条に提出されたすべての報告書を再選択マークで示すかどうか、および(2)このような提出要求を過去90日以内に遵守してきたはい 」と NO ↓ ↓

再選択マークは、登録者が過去12ヶ月以内(または登録者がそのような文書の提出を要求されたより短い時間以内)に、S−T規則405条(本章232.405節)に従って提出を要求した各相互作用データファイルを電子的に提出したか否かを示すはい 」と いいえ ↓ ↓

登録者が大型加速申告会社，加速申告会社，非加速申告会社，小さな報告会社，あるいは新興成長型会社であることを再選択マークで示す。取引法第12 b-2条の規則における“大型加速申告会社”、“加速申告会社”、“小申告会社”、“新興成長型会社”の定義を参照されたい。

新興成長型企業であれば、登録者が延長された移行期間を使用しないことを選択したか否かを再選択マークで示し、取引所法第13(A)節に提供された任意の新たまたは改正された財務会計基準を遵守する↓ ↓

登録者が報告書を提出したかどうかを再選択マークで示し、その経営陣が“サバンズ-オクスリ法案”(“米国連邦法典”第15編、第7262(B)節)第404(B)条に基づいてその財務報告の内部統制の有効性を評価したことを証明する。この評価は、その監査報告書を作成または発行する公認会計士事務所によって行われる↓ ↓

証券が同法第12条(B)に基づいて登録されている場合は，登録者の財務諸表が以前に発表された財務諸表の誤り訂正を反映しているか否かを示すチェックマークを適用する」と

これらのエラーのより真ん中に登録者の任意の実行者が関連回復中に第240.10 D−1(B)条に従って受信されたインセンティブベースの補償に従って回復分析を行う必要があるかどうかを再選択マークで示す↓ ↓

登録者がシェル会社であるかどうかをチェックマークで示します （ 取引法の規則 12 b—2 で定義されています ） 。 はい ↓ ↓ NO 」と

2023年6月30日現在，登録者の非関連会社が保有する投票権のある普通株の総時価は約$である23,600,000それは.各役員や役員実益が持つ普通株は除外されており、これらの人たちは関連会社とみなされる可能性があるからだ。執行役員と取締役を関連会社に決定することは，必ずしも他の目的からの決定的な決定であるとは限らない。

登録者の発行済普通株式の株式数 2024 年 10 月 31 日現在 17,128,667 SHアレスだ

法団に成立した文書を引用する

説明的説明

表の内容

Rを特に注釈するエガルディン前向きな陳述

この10-k表年次報告書は、1933年証券法(“証券法”)第27 A節および1934年“証券取引法”(“取引法”)第21 E節の意味に適合する前向きな陳述を含み、これらの陳述は重大なリスクと不確実性に関連する。展望的陳述は一般的に未来の事件や私たちの未来の財務や経営業績と関連がある。場合によっては、“可能”、“予想”、“予想”、“計画”、“予想”、“可能”、“計画”、“目標”、“プロジェクト”、“考慮”、“信じ”、“推定”、“予測”、“潜在的”または“継続”などの言葉、または私たちの期待、戦略、計画に関連する他の言葉、または否定を含むので、前向きな陳述を識別することができる。意図しています本年度報告におけるForm 10−kに関する前向きな陳述は、以下のように含まれるが、これらに限定されない

Forward-looking statements are not guarantees of performance. You should not put undue reliance on these statements which speak only as of the date hereof. You should understand that the following important factors, in addition to those discussed under the heading “Risk Factors” and elsewhere in this Annual Report on Form 10-K, could affect our future results, and could cause those results or other outcomes to differ materially from those expressed or implied in the forward-looking statements in this Annual Report on Form 10-K:

These and other factors that could cause actual results to differ from those implied by the forward-looking statements in this Annual Report on Form 10-K are more fully described under the heading “Risk Factors” and elsewhere in this Annual Report on Form 10-K. The risks described under the heading “Risk Factors” are not exhaustive. Other sections of this Annual Report on Form 10-K describe additional factors that could adversely affect our business, financial condition, or results of operations. New risk factors emerge from time to time and it is not possible to predict all such risk factors, nor can we assess the impact of all such risk factors on our business, or the extent to which any factor or combination of factors may cause actual results to differ materially from those contained in any forward-looking statements. All forward-looking statements attributable to us or persons acting on their behalf are expressly qualified in their entirety by the foregoing cautionary statements. We undertake no obligations to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

In addition, statements of belief and similar statements reflect our beliefs and opinions, as applicable, on the relevant subject. These statements are based upon information available to us, as applicable, as of the date of this Annual Report on Form 10-K, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain and you are cautioned not to unduly rely upon these statements.

Frequently Used Terms

Unless otherwise stated in Item 8. Financial Statements and accompanying footnotes, or the context otherwise requires, references in this Annual Report to:

“Business Combination” are to the business combination of Legacy Nuburu with a subsidiary of Tailwind, with Legacy Nuburu surviving such business combination as a wholly owned subsidiary of Tailwind;

“Business Combination Agreement” are to that certain Business Combination Agreement, dated as of August 5, 2022, by and among Tailwind, Nuburu, and Merger Sub, Inc., as the same has been or may be amended, modified, supplemented, or waived from time to time;

“Closing” are to the consummation of the Transactions;

“Closing Date” are to January 31, 2023, the date on which the Transactions were consummated;

“普通株”とは、当社の普通株で、1株当たり0.0001ドルの価値があり、ニューヨーク証券取引所に上場した後の業務合併である

交換比率“とは、2023年2月6日に米国証券取引委員会に提出された8-k表(文書番号001-39489)の現在の報告書の添付ファイルとして、企業合併プロトコルにおいて定義され計算された商数を意味する

Legacy Nuburu“とは、デラウェア州にある子会社Nuburu Inc.(締め切り前はf/k/a Nuburu，Inc.)を意味する

“公開株式証”とは、天風初公開発売(定義は以下参照)で公衆投資家に販売された16，710，785社の会社全体株式証明書を指す

“SEC” is the Securities and Exchange Commission;

“Tailwind” are to Tailwind Acquisition Corp, a Delaware corporation and our predecessor company prior to the consummation of the Transactions, which changed its name to Nuburu, Inc. following the consummation of the Transactions, and its consolidated subsidiaries;

“Tailwind IPO” are to the initial public offering by Tailwind which closed on September 9, 2020; and

“Transactions” are to the Business Combination, together with the other transactions contemplated by the Business Combination Agreement and the related agreements.

Unless the context otherwise requires, all references in this section to “Nuburu,” the “Company,” “we,” “us,” “our,” and other similar terms refer to: (i) Legacy Nuburu and its subsidiaries prior to the Closing, and (ii) Nuburu, Inc., a Delaware corporation, and its consolidated subsidiary, Nuburu Subsidiary, Inc., after the Closing.

SUMMARY OF RISK FACTORS

The following is a summary of the principal risks described below in Part I, Item 1A “Risk Factors” in this Annual Report on Form 10-K. We believe that the risks described in the “Risk Factors” section are material to investors, but other factors not presently known to us or that we currently believe are immaterial may also adversely affect us. The following summary should not be considered an exhaustive summary of the material risks facing us, and it should be read in conjunction with the “Risk Factors” section and the other information contained in this Annual Report on Form 10-K.

Risks Relating to Our Business and Operations

Risks Relating to Ownership of our Securities

For a more complete discussion of the material risks facing our business, see Item 1A. "Risk Factors" below.

PART I

ITEM 1. BUSINESS

Unless the context requires otherwise, references to “Nuburu,” “we,” “us,” or “our” in this section are to the business and operations of Legacy Nuburu prior to the Business Combination and to the Company and its subsidiaries following the Business Combination.

Corporate History and Background

We were originally incorporated in Delaware on July 21, 2020 under the name “Tailwind Acquisition Corp.” as a special purpose acquisition company, formed for the purpose of effecting an initial business combination with one or more target businesses. On September 9, 2020 (the “IPO Closing Date”), we consummated our initial public offering (the “IPO”). On January 31, 2023, we consummated a business combination with Nuburu Subsidiary, Inc. f/k/a Nuburu, Inc. (“Legacy Nuburu”), a privately held operating company which merged into our subsidiary Compass Merger Sub, Inc. (the “Business Combination”) and changed our name to “Nuburu, Inc.,” and we became the owner, directly or indirectly, of all of the equity interests of Nuburu Subsidiary, Inc. and its subsidiaries. In light of the fact that the Business Combination has closed and our ongoing business will be the business formerly operated by Legacy Nuburu, this business section primarily includes information regarding Legacy Nuburu’s business.

Overview

Nuburu is a leading innovator in high-power, high-brightness blue laser technology that is focused on bringing breakthrough improvements to multiple markets, including e-mobility, healthcare, and consumer electronics via a broad range of high value applications that include welding and 3D printing. By delivering increased speed and quality we hope to enhance productivity and cost efficiency for manufacturers in the e-mobility, consumer electronics, aerospace and defense, and 3D printing markets as well as to find additional applications currently not yet serviced by existing laser technologies.

We have invented, patented, and developed what we believe to be the next pivotal point for manufacturing technology, with the potential to revolutionize the manufacturing industry by changing how products are made. Our technology is also aligned with the need to reduce carbon generation in manufacturing. Most manufacturing processes require heat to shape, manipulate, and form basic materials into a product. The Nuburu laser system outperforms currently available alternatives by more efficiently coupling heat into the material being processed, thereby helping to promote a more sustainable future by using less energy and, in turn, generating less carbon in the manufacturing process.

A fundamental physical characteristic is that metals absorb blue laser light better than infrared (“IR”) laser light. In the case of materials such as gold, copper, silver, and aluminum the advantage of blue laser light is substantial. The better absorption results in substantial improvements in the quality of the part produced, the yield of parts during production and the speed at which the part can be produced. We believe that these advantages enable efficiencies in the overall productivity of the manufacturing line and can extend the life of the products produced. We also believe that these characteristics will be advantageous to our customers, whether in upgrading existing manufacturing processes or enabling entirely new approaches to manufacturing through the use of Nuburu’s laser systems in either industrial welding or 3D printing technology applications.

Nuburu is currently shipping blue laser systems for applications such as EV batteries, large screen displays, and cell phone components. We have performed thousands of welds in hundreds of application tests to date and we believe we have a strong and substantial customer pipeline for our laser light engines.

Nuburu has developed a thorough understanding of the market need for its laser light engines across a broad array of applications including battery, e-mobility, consumer electronics, and 3D printing metal systems. We estimate that our serviceable addressable market (“SAM”) will grow from approximately $4 billion today to approximately $34 billion by 2032 (see “— Market Opportunity”).

Nuburu’s co-founders identified these market opportunities at an early stage and began working in 2013 to protect their early mover advantage with a strong patent portfolio. Nuburu has approximately 220 granted and pending patents and patent applications globally, which include: blue laser applications such as welding, blue laser technologies, single mode blue laser technology, blue Raman laser technologies, addressable array technologies, and 3D printing using blue lasers. Notably, Nuburu has been awarded patent protection for the use of high-power blue lasers. At the time Nuburu was started, industrial quality, high-power blue lasers did not exist and Nuburu was the first to successfully apply blue lasers to the practice of welding and 3D printing.

Industry Background

Industrial markets have been a major focus for laser applications ever since the invention of the laser. In the early 1970s, lasers emerged as a useful source for cutting and welding. However, the material systems were limited to steel and other materials with low reflectivity given the long wavelengths of the Infrared Carbon Dioxide (IR CO2) lasers that were the mainstay of that era.

The first era was followed by the introduction of lamp-pump yttrium aluminum garnet (YAG) lasers in the late 1970s with a shorter wavelength and more compact size, which resulted in an expansion of applications into cutting, welding, and drilling. The lamp pumped lasers were superseded in the 1980s by the invention of diode pumped solid state lasers which offered higher efficiency and superior reliability.

However, the lamp pump lasers still had poor absorption in materials such as aluminum and copper given the IR wavelength of these lasers.

In the early 2000s, the fiber laser was introduced into the industrial laser market and offered superior efficiency, reliability, and scalability than the diode pumped solid state lasers and was rapidly adopted because of its compact size. The fiber laser with its improved performance displaced the CO2 lasers in welding and ushered in a new era for additive manufacturing (3D printing). Currently, fiber lasers account for

approximately 50% of the total materials processing laser market according to Laser Focus World, in part because of their compact size and ease of operation. The fiber laser, however, still operates at the IR wavelength with low absorption in materials such as copper and aluminum.

Market Opportunity

We estimate the total addressable market (“TAM”) for industrial lasers that could be replaced by blue lasers (i.e., our total revenue opportunity at 100% market share, assuming no competition), to be $15 billion today and to grow to over $65 billion in the next ten years. Our estimated TAM was constructed by our management team using three primary elements: (i) the 3D metal printing system market analysis published in the AMPOWER 2022 market report, (ii) the blue addressable laser market published in the Laser Focus World 2022 market report, and (iii) the non-laser technology replacement market which was estimated by Nuburu based on its discussions with existing and potential customers about their expected production needs and anticipated demand.

Included in our estimated TAM is the 3D printing metal system market, which is a $2.7 billion market today, including machines, service, and materials, and is projected to grow to over $8.4 billion by 2026 based on projections by AMPOWER and to $32.8 billion by 2032 based on our own estimates. The TAM for industrial lasers that could be replaced by blue lasers is $10.5 billion today and, assuming a greater than 10% compounded annual growth rate ("CAGR"), based on projections by Laser Focus World’s 2022 market summary and our own estimates, could reach approximately $35 billion by 2032. In addition, we have included a non-laser conversion TAM, which we estimate to be $0.75 billion today and which we project to grow to $5.6 billion by 2032, assuming the conversion of ultrasonic and contact welding methods to blue laser welding methods. This data is shown in the following chart and results in an estimated TAM of over $65 billion.

Total Addressable Market

（ 1 ） 出典 ： AMPOWER 2022 と Nuburu は顧客のフィードバックに基づく推計値です。
（ 2 ） 出典 ： Laser Focus World Industrial Forecast 2021 および顧客フィードバックに基づく Nuburu の推計。
（ 3 ） 出典 ： 顧客のフィードバックに基づく Nuburu の推定値。
（ 4 ） 超音波、抵抗、 TIG 、選択溶接などの非溶接技術が含まれています。

Nuburuのサービス測位可能市場も想定しており，次の図に示すように，我々が推定した既存や計画中の製品がサービス可能な部分を表し，同様に競合がないと仮定している.我々の管理チームは，クライアントとの議論を考慮して，我々が今日製造した青色レーザシステムがどのようにレーザ溶接と3 D印刷市場の需要を満たすかを分析したボトムアップ分析を行うことでこの見積りを構築した。我々の青色レーザーシステムのSAM計算は非レーザー工作機械をレーザーベースのシステムに変換することと、電池、電気自動車、消費電子とディスプレイ製造市場を細分化することを含む。

3 D印刷部分は、青色レーザに基づく3 Dプリンタでこの市場に浸透しようとしているので、SAMの計算に含まれている。私たちのSAMは現在40ドル以上と推定され、今後10年以内に330ドル以上に増加すると予想されている。

以下に示す推定SAMは，我々の各細分化市場におけるいくつかの既存および潜在的なクライアントの調査に対して提供されるフィードバックによって駆動されるボトムアップの計算である.取引量推定は、

以上に基づき、電池、電子移動、消費電子、金属3 D印刷システムなどのキー市場細分化市場の電化に推進され、光エンジン工業レーザー細分化市場は2022年の27ドルから2032年の95ドルを超えるまで増加すると予想される。この予想される市場成長は、新しい市場チャンスと、既存のアプリケーションにおいてファイバレーザと固体レーザとを置換する組み合わせである。AMPOWER 2022年報告とNuburuによると、3 D印刷金属システム市場は2022年の20ドル以上から、年複合成長率は約26%と、2032年の320ドル以上に増加すると予測されている。

サービス可能な宛先市場

（ 1 ） 出典 ： AMPOWER 2022 と Nuburu は顧客のフィードバックに基づく推計値です。
（ 2 ） 出典 ： 顧客のフィードバックに基づく Nuburu の推定値。
(3)生体機器，ディスプレイなどが含まれる.

ヌブルの既存と計画中の製品は私たちのサムの需要をよく満たすことができると信じています。私たちが新技術に基づく製品を開発し続けるにつれて、私たちは未来にもっと大きな競争をすることを願っています。

主な増加傾向

時間の経過とともに，製造業務はレーザーを材料加工応用に集積し始めている。3 Dプリント，エネルギー貯蔵，電子移動，消費電子などはすでに急速に増加している分野を経験しており，レーザーを採用すべきかどうかではなく，どのように，どこで，いつレーザーを彼らの業務に統合するかに関心があると考えられる。

製造業生態系の先進生産技術への長期的な傾向に加えて、(I)エネルギー脱炭素と電気化、(Ii)サプライチェーン改善と製造還流を含むレーザーシステム市場の成長を推進する強力な“追い風”となる2つのグローバルマクロ傾向があると考えられる。Nuburuは、この2つの傾向はいずれもその製品の魅力と採用率を推進するとしている。

エネルギー脱炭化や電化の傾向については，多くの経済大国が炭素排出削減のためのエネルギー政策を異なる程度実施し始めていることが発表されている。このような政策を実行する方法は、特定の交通機関の電気化を増加させることを含む。この傾向から利益を得ることが予想されるが，電池はこれらの政策の重要な要素であるため，Nuburuの青色レーザ技術は電池をより効率的に溶接することができる。

世界にもサプライチェーンを改善し、生産を国内生産に移す傾向がある。新冠肺炎疫病及び関連する広範囲の封鎖に加え、ロシアのウクライナ侵攻に加え、一連の製品のグローバルサプライチェーンの脆弱性と弱点を暴露した。これにより企業や政府は既存のサプライチェーンを再検討し，ビジネス計画や政策策定の上昇を招き，キー部品やサブ配線の製造を国内市場に移し，下流組立·製造工場に近づけることを目指している。サプライチェーンの脆弱性を還流および減少させる1つの潜在的な方法は、製造業者が製品を製造するために必要な多くのコンポーネントを必要とするか、または一歩で印刷製品を完成させることができるように、3 D印刷の使用を増加させることである。私たちの製品はこの傾向に意味のある解決策を提供していると信じています。Nuburuの青色レーザー技術は必要に応じて経済的に効率的に部品を生産する手段を提供することができるからです。

私たちの技術は

赤外レーザーは現在多くのシステムで用いられている主流の技術であるが，アルミニウム，銅，金，他の反射金属を処理する最適な選択ではないと考えられる。Nuburuは、その技術は有利な地位にあり、製造業の新紀元を開き、レーザー技術をより広範な応用と市場に拡張できると信じている。

Nuburuは現在、(I)レーザ溶接または材料加工および(Ii)金属3 D印刷の2つの主要市場を狙っている。近年、この2つの市場は大幅に増加し、すでに数十億ドルのTAMとSAMが発生しており、両市場ともさらなる大幅な増加を経験すると信じている。

溶接する

Nuburuの最初の重点は材料加工市場だった。赤外レーザーと比べ、青色工業レーザーは青色レーザーに対してより良い吸収能力を持ち、それによって溶接と接続応用により高い品質と速度を提供した。例えば，電化波を製造する重要な材料である銅では，赤外レーザーの吸収率はわずか5%であるのに対し，青色レーザーの吸収率は65%に達している。

従来の赤外線溶接と接続は実際には激しい過程であり、目標金属を気化させ、粒子を噴射し、穴を残す。これらの問題を最大限に低減するために、赤外レーザは、高反射率材料を溶接する際の欠陥を低減するために様々な方法を採用しており、最も一般的な2つの方法は、(I)スキャナを用いて金属上に渦パターンを生成すること、(Ii)二重ビームまたは環状ビームを使用することである。

第1の方法は、スキャナベースの渦モードを使用することであり、これは可能であるが、より複雑な溶接モードを生成し、所与のレーザパワーの速度が遅くなる。これに対し，同一パワーの青色レーザ直接溶接銅材料の速度は大きく速く(8倍に達する)，溶接過程での欠陥が最も少なく，さらになく，溶接過程で発生する飛散も最も少なかった。

第2の方法は、リングレーザビームであり、より低出力のレーザビームを用いて高強度のレーザビームを囲む。低出力のレーザビームは、高強度レーザビームがそのエネルギーを部品に結合することができる程度に金属を予熱する。銅の場合，この予熱技術は吸収を約5%から15%に増加させ，赤外レーザーが溶接を開始できるのに十分である。これに対し，同じパワーレベルの青色レーザ溶接銅の速度はリングレーザよりもはるかに速く(最大8倍速く)，エネルギー効率はIRリングレーザに比べて青色レーザの吸収率(65%)がはるかに高いためである。リングレーザは溶接を開始するために余分なエネルギーを使用しなければならないが、青色レーザは部品を溶接するだけである。銅箔を溶接する際には，リングレーザはスポット溶接しかできないことが明らかであるが，青色レーザは銅箔を連続的に溶接することができ，電池製造に非常に必要な機能である。

これにより、Nuburuの青色レーザは貴重な能力を提供し、製造手段を改善することができ、現在の赤外レーザよりも低いコストで製造することができる。これらの能力は，これまで主にレーザ溶接鋼やステンレス部品を用いてきたメーカーでも銅やアルミニウム(電気自動車で大量に使用されている)などの反射の強い材料にレーザ光を使用することが可能となるため，レーザ溶接のより広く採用されることが予想される。

金属3 D印刷

Nuburuの第2のポイントは金属3 D印刷である。3 D印刷には多くの異なる方法があるが、最も一般的なレーザベースの方法は、(I)レーザ粉床融合、(Ii)直接エネルギー堆積、および(Iii)レーザベースの糸送りの3つに分類される。これらの方法はすべてその利点があり、粉床融合方法は現在最も高い解像度と最も細かい機能印刷能力を提供しているが、印刷速度も最も遅い。直接金属堆積方法は表面光沢度が悪く，粉末床溶融のように細かい特徴を印刷することはできないが，非常に高い構築速度を実現していることは確かである。レーザーによる送糸印刷方法は、比較的粗い表面光沢を発生させるが、より大きな部品を非常に高い速度で印刷することができることが主な利点である。

粉床溶融

粉末床融合は、薄い粉末原料を敷設し、次いで、エネルギー源がその平面上の特定の位置で粒子を溶融させる3 D印刷方法である。その後の粒子層が堆積され、再び選択的に溶融され、上層上の粉末が下の以前に溶融した層に接続される。このプロセスは、部品が完了するまで、各層に対して異なるパターンを使用して繰り返される。完成すると、部品は構築プレートから除去され、未溶融粉末は回収され、再使用されて再使用される。部品を清掃·検査し，必要な部品の特徴とサイズを実現するための最終加工手順を実行する.

レーザーを粉末床溶融のエネルギーとする場合，この技術は選択的レーザー溶融と呼ばれる。レーザーはエネルギーの第一選択であり、電子ビームのような代替方法のため、建築体積が真空中にあることが要求される。しかしながら、従来の赤外線レーザも3 Dプリンタによって同様に制限されており、溶接アプリケーションにおける有効性も制限されている。高強度のレーザ光の束で粉末床層を迅速に走査し、金属粒子を溶融及び気化させる。最小の粒子は蒸発しやすいが，大きな粒子の一部も蒸発する。これはいくつかの点で問題がある。まず，金属蒸発時に粉末から出る金属羽流は複雑な油煙ろ過と管理が必要である。次に、印刷工程において、金属が気化して部品に閉じ込められ、部品中に空洞や欠陥が生じる可能性があり、これが生産された最終部品の弱点である可能性がある。このような欠陥は、機械的欠陥である可能性があり、または銅の場合、熱および電気特性は、これらの空洞の存在によって劣化する可能性がある。物理部品サイズおよび印刷量のスケーリングを試みる際に生じる第3の問題は、部品の隣接領域または隣接部品上に容易に再堆積することができるので、金属羽流の管理である。金属蒸気のこの凝縮は部品中の空洞や欠陥を招くこともあり，赤外レーザを用いたレーザ粉床溶融システムの規模拡大は機器設計者にとって課題であり，金属を急速に溶融させる基本過程にはこれらの制限があるためである。

When used in a powder bed fusion application, the blue laser can be incorporated in one of two ways. The first, is simply a drop-in replacement for the IR laser, which already represents a significant improvement as blue laser has the advantage of increased absorption and consequently increased printing speed. This printing speed advantage has been demonstrated by Nuburu in both copper and stainless steel, with consistently faster printing speeds than achieved with an IR laser.

However, the blue laser, because of its high absorption rate, can also be used in a different mode of printing, one that does not lead to vaporization of the metal and consequently a dramatic reduction in the voids or defects created in the part during the printing process. This process is the conduction mode printing process where a large spot size with a low laser power density is used to take advantage of the enhanced absorption of the laser beam. The use of this large spot size is best described as area printing, where the spot is an image to be printed rather than just a spot. This results in a very calm melting of the powder with little to no vaporization, thereby substantially eliminating the need for fume management and successfully avoiding many pitfalls of the current 3D printing methods. The result is a substantial increase in print speed and the ability to easily scale up the printing method to large areas or to a large part count in a single printing run.

Direct Energy Deposition

Direct Energy Deposition ("DED") is the method where the powder is delivered by a nozzle into the laser beam as the beam traverses the part being produced. The advantages of this method include the very efficient use of powder and the ability to deposit metal at a very high build rate. The powder use is more efficient than a powder bed system, because only the powder to be deposited is used in the process, unlike a powder bed, where the entire area of the part is covered with powder as it is being produced. This method has been in use for many years for remanufacturing old parts as well as producing new parts. A very precise motion control system is required to maintain surface quality as well as build quality. However, the surface quality and the minimum wall thickness is a direct function of the large spot size used in this method and consequently this method cannot achieve the same part resolution or surface finish as a powder bed based system.

We believe that the blue laser is an ideal source for this method because of its ability to couple the laser power efficiently into the powder as it is rapidly approaching the build surface. The powder must be completely melted before reaching the surface to be properly incorporated into the build. The high absorption characteristics of the blue laser light enables the rapid heating of all metal materials that would be used with this method, resulting in Nuburu’s blue laser achieving an increase in build speed of up to 7x in copper and 3x in stainless steel compared to an equivalent IR laser.

Laser-based Wire Feed

Wire feed deposition is the method of 3D printing where a wire is fed into the laser beam as the beam traverses the part. This method has also been used for many years for remanufacturing old parts as well as producing new parts. A very high precision motion control system is likewise required to maintain surface quality as well as build quality. The overall surface quality and minimum wall thickness is limited by the wire thickness used in this method. Consequently, this method cannot achieve the same part resolution or surface finish as a powder bed system, but it can achieve very high metal deposition rates.

We believe that the blue laser is an ideal source for this method because of its ability to couple the laser power efficiently into the wire as it is rapidly approaching the build surface. The wire must be completely melted just as it reaches the build surface. This approach requires a wire feed head that can operate in any direction coupled to the blue laser and a very fine control of the wire as it is fed into the laser beam. The approach can deposit material very fast and uses a gantry style system to trace out and build the part. Some companies have used 6-axis robots to accomplish the same type of build, allowing very large parts to be fabricated out of materials such as titanium and other alloys. Nuburu is working with other companies that are developing systems using a very fine wire feed method which should greatly improve the surface finish and allow the manufacturing of very large parts (~1m3).

Blue Laser in 3D Printing

Nuburu believes its blue laser technology has the potential to be a novel solution for 3D printing by opening an entirely new path to lowering 3D printing costs. We expect the blue laser light engine will be a “plug and play” replacement for today’s IR lasers, enabling both new systems to be built as well as old systems to be upgraded. Once upgraded, we expect that these light engines will provide a wider material processing capability, higher printing speeds, better resolution and stronger as printer parts. Nuburu has demonstrated this capability by integrating its blue laser into a commercial 3D printed and quantifying the speed and performance advantages. In addition, the blue laser has demonstrated the ability to print “hard to print” materials such as copper and gold. These results can be attributed to the enhanced absorption characteristics of the blue laser light which enabled the blue laser to print these materials when the IR lasers could not melt the base material in either a powder bed printer or wire feed printer. These results highlight that Nuburu’s blue laser provides increased flexibility with respect to the material used in blue laser-based 3D printer. We believe this flexibility in material processing makes the blue laser a superior choice for customers when designing their production lines and making their purchasing choices.

A challenge with 3D printing is to print parts that are competitive in cost with more conventional metal manufacturing methods such as casting and injection molding. Nuburu has demonstrated and applied for patents on a new area printing technology (“APT”). Nuburu is currently designing and testing this new technology which we believe has the potential to greatly increase the printing speed of a more conventional 3D printer. The projected printing rates for this technology would make the per part cost competitive with more conventional means of manufacturing such as sand casting and injection molding. We believe that the APT approach to printing challenges the paradigm of today’s 3D printers and consequently has the potential to become a breakthrough technology that could propel 3D printing into major manufacturing markets by meeting the cost per part required by these industries and permitting the printing of much larger parts.

Nuburu has already demonstrated this printing technique in the laboratory and is now being funded through a U.S. Air Force contract from AFWERX to develop a full-scale version of such a printer (see “— Research and Development — Research”).

Benefits of Our Technology

We believe Nuburu’s blue lasers are an ideal manufacturing tool for a number of reasons.

Wavelength Characteristics

Fundamental physics states that the color of the light directly represents the energy carried by light. As the energy of the light increases so does the ability of materials to absorb this energy. Metal absorption is one manifestation of this inherent property of blue. In other words, no amount of manipulation can change the way that metals absorb other wavelengths of light, meaning that blue has an inherent superiority for processing steel, gold, titanium, aluminum, copper, nickel, and many other metals. This applies to metal surfaces that are machined, polished, sandblasted or etched which has no effect on the ability of the laser to melt or weld the material.

Superiority to IR Lasers

The blue laser is adept at welding parts that are difficult for an IR laser to weld, particularly reflective metals such as copper, gold and aluminum. The IR wavelength is poorly absorbed by these materials, so IR lasers struggle to create and sustain melting. The ways that IR lasers can overcome the absorptivity issues are either by preheating the metal or by increasing the laser intensity until the material vaporizes and creates what is termed a keyhole. While this allows absorption, the process is violent and creates spatter and debris on the component and voids in the weld. Spatter creates loose debris in assemblies which may cause electrical short circuits and failure. Pores in the weld zone reduce strength and electrical performance.

A substantial number of products requires some level of welding, for example, batteries in an electric vehicle, cell phones, cell phone components and large screen displays. These products contain significant amounts of copper, gold, aluminum and stainless steel which must be joined together at some point during the assembly of the product. Nuburu’s light engines are able to deliver the necessary heat required to weld the precision parts together quickly and with high manufacturing yields.

Permits Welding of Smaller Features

Nuburu uses patented technology to spatially and spectrally combine the outputs of blue wavelength diodes. The diodes are individually aligned to produce smaller spot size and higher intensity. This high intensity, or brightness, creates a smaller laser focus and therefore allows welding or melting of smaller features. In addition, the high brightness allows greater distances from the focus lens to the workpiece allowing scan head beam delivery or access into remote positions. In summary, Nuburu blue lasers offer flexible output for use in an automated machine.

(1) Speed across materials on a per watt basis.

3D Printing Compatibility

Nuburu provides manufacturers with blue lasers for welding, cutting, stripping coatings and 3D printing. These lasers, when combined with external optical components, make up a light engine. Our customers are able to integrate our blue light engines into their manufacturing processes in a variety of ways, including by directly attaching the laser to a scanner to allow for rapidly redirecting of the laser beams across a part or, in the case of 3D printing, the powder bed. We believe that this compatibility enables our blue laser-based light engines to be a plug and play replacement for today’s IR lasers.

Alternatively, a Nuburu laser fiber could be attached to a welding or cutting head and then mounted on a motion system to allow the laser beam to be moved and repositioned. Finally, a Nuburu light engine could consist of a Nuburu laser and a light modulation system that enables a new generation of 3D printers based on APT rather than single spot printing, which is currently the industry standard. We believe this approach to 3D printing, which we are currently working to develop, has the potential to revolutionize the industry by delivering increased speed and quality in printing metal parts.

Modular Design

Nuburu’s laser systems are based on a modular design where the lowest power module is the building block for higher power systems. This homogenizes the supply chain, streamlines production and allows for rapid new product development. By using a common module approach, we aim to achieve lower costs, consistent performance, good reliability and simplified serviceability.

Simple Design

The Nuburu laser designs are straight forward and designed for automated assembly. The light from the individual laser diodes is combined with no additional steps to create the beam. This is referred to as a direct diode laser source and is more efficient than other technologies, requiring less electrical power to run the machine. To achieve high power, high brightness from its laser systems, Nuburu’s automated manufacturing methods align all of the optical components of the system. Each laser diode operates at a different wavelength or color and they are each superimposed on each other to achieve a laser beam brightness that is the same as a single emitter. A linear array of sources is created with this method which represents the highest brightness and power that can be achieved from the combination of so many laser diodes. The high brightness translates into the lowest possible beam divergence for the product. The low beam divergence is essential for integration with industry-standard optical scanning systems, including those integral to both production lines and powder bed fusion 3D printing.

Recognition

The value proposition of the Nuburu commercial product line has led to several industrial and academic partnerships, along with industry recognition, including: Finalist Prism Award — Photonics Media (2018), Innovators Award, Platinum Honoree — Laser Focus World (2018),

Innovators Award, Gold Honoree — Laser Focus World (2019), Innovation Award — Laser World of Photonics (2019), Technology Innovation Award, Best Practices Award, Frost & Sullivan (2019), and Innovators Award, Gold Honoree — Laser Focus World (2020). In addition, in 2019, Frost and Sullivan awarded Nuburu its Technology Innovation Award recognizing Nuburu as a company employing best practices.

Key Advantages

For welding applications, Nuburu’s blue industrial laser provides the following key advantages when compared to conventional welding methods:

For additive manufacturing, Nuburu’s blue laser light engines provide the following advantages:

Our Products

In 2017, Nuburu launched the world’s first commercially available high-power blue industrial laser, the Nuburu AO-150. This laser demonstrated the ability to weld the thin foils used in lithium-ion batteries.

These batteries are the predominant rechargeable power source for portable devices and tools, and are built using layers of thin copper and aluminum foils separated by electrolytes that hold and release the electrical charges. The foils must be joined along one edge, but traditional manufacturing methods of achieving this have been unsatisfactory: Soldering is time consuming; ultrasonic welding creates poor quality welds and requires tool contact and thus entails associated repair and replacement costs; and the IR can only spot weld these foils, both of which prevent batteries from achieving high performance. By contrast the Nuburu AO-150 welds these foils rapidly with essentially no particle ejection or voids left behind.

2018年、ヌブルはより高出力のAO-500と追加のキットハードウェアを発売し、青色工業レーザーの応用範囲を拡大しました。例えば、上記リチウムイオン電池は、シートの周りに構築されているが、シートはタブに溶接され、タブはハウジングに溶接され、ハウジングは母線に溶接され、これらの母線は、各モジュールを接続して高容量電池を実現する。これらの継手の各々は、異なる材料と異なる厚さの材料とを接続することができる。レーザパワーと他のパラメータを直接調整することで、1台の青色工業レーザはこれらのすべての溶接を完了することができる。これは、高速生産の高品質接続の直接的な利点と、生産ラインの敷地面積の減少とメンテナンスと訓練コストの低減に関する間接的な利点を提供する。

ヌブルは青い産業レーザーの性能を向上させ続けている。2019年、Nuburuは次世代レーザーダイオードをそれぞれ200ワットと650 Wを生産するAO-150とAO-500製品に統合することができ、AO-200とAO-650を導入することができる。Nuburuは引き続きそのAO-650レーザの性能を改善し、より寿命が長く、電力マージンがより高い最新のレーザを発売する。Nuburuは2台のAO-650レーザーを組み合わせ、1，400ワットまでのレーザーパワーの応用を研究する必要がある。1，400ワットに達する電力レベルで複数回のテストを行い、主要な銅溶接市場に必要な製品を満たすためにガイドラインを提供し、より高い電力とより小さい溶接点サイズが必要であることを表明した。

Nuburuは，これらの早期テスト結果に基づいて，次の図に示す長期路線図を作成した。これらの結果の後，新たな製品設計方法が採用され，より高い輝度と急速に数千ワット(“kW”)の電力レベルに拡張されることが予想される。これがバスケットボールリーグですＴＭ ビーム品質が 3 倍に改善され、ベースモデルの出力電力が 250 ワットにアップグレードされたシリーズレーザー。

NuburuはNUBURU BLにおける商業発光最初のレーザを発表したＴＭ BL—250 は 2023 年 1 月発売。 BL—250 は、追加製品のベースビルディングブロックとして機能すると予想しています。 複数のモジュールを 1 つのレーザーシステムに組み合わせることで、連続出力を高める製品を開発することを期待しています。例えば、 4 つの BL—250 モジュールを 1 つのレーザーシステムに組み合わせると、 1，000 ワット以上の連続出力を備えた製品が可能です。 さらに、 1，000 ワットサブシステムを組み合わせることで、出力を 2 kW と 4 kW に拡大できる見込みです。 これらのシステムの青色レーザーダイオードの出力電力は引き続き改善され、 1.5 kW 、 2.5 kW 、 4.5 kW に簡単にアップグレードされることを期待しています。 このモジュラー設計アプローチにより、自動生産ラインの迅速なスケールアップ、供給の均質化を目指しています。

チェーン、私たちの生産を簡略化し、製品開発速度を向上させる。このモジュール化手法が，競争力のある価格で一貫した性能，良好な信頼性，簡略化された顧客保守性を提供することが期待される.

この一連の製品の場合、Nuburuは最終製品がレーザおよびビーム伝送システムを含む光エンジンの形態になると予想する。我々のビーム伝送システムは、(I)光学スキャナベースのシステムまたは(Ii)センサ付き溶接ヘッドのうちの2つのタイプのうちの1つであってもよい。BLを開発していますＴＭ 既存のスキャナーと互換性のある製品ラインは、一対の直交ミラーで処理表面を横切ってビームをすばやくスキャンすることによって動作します。

私たちのAOもBLもＴＭ 製品ラインは、シームトラッカーや溶接品質モニターなどのさまざまなセンサーを含む標準溶接ヘッドと互換性があるように設計されています。 これらのビームデリバリーシステムは、 Nubuuru がお客様に完全な溶接ソリューションを提供することにコミットしているため、レーザーシステムの販売に追加されます。

我々は現在、単一モード青色光ファイバレーザ(NUBURU SM)に関する製品路線図で発表される次世代青色レーザの開発に努力していますＴＭ シリーズ ） は、業界で比類のない性能と明るさを見込んでいます。 最初のアルファプロトタイプを設計し、現在テストしています。 当社は、このラインのシングルモードブルーレーザーを、両方のタイプのビーム送達システムと互換性を持たせるように設計していますが、光学スキャナが好ましいビーム送達システムです。 今日、すべての粉末ベッド 3 D プリンタは IR レーザーとスキャナを使用しています。 従来の赤外線レーザーの直接ドロップイン代替として、 Nuburu シングルモードレーザーを設計しています。 青いシングルモードレーザーによる 3 D プリントは、青い光の高い吸収の利点があり、加工される材料に関係なく、ほぼネット形状で表面品質の良い固体部品を作成します。 鋼鉄、チタン、純銅、銅合金については、初期試験の結果、構築速度と部品品質の大幅な改善、後処理時間の短縮が示されています。

私たちの競争優位は

破壊的技術： 当社の技術は、 e モビリティ、コンシューマーエレクトロニクス、航空宇宙 · 防衛、 3 D プリンティングなどの急速に成長する市場を破壊し、可能にし、持続可能な未来を促進すると信じています。

独自技術： 当社は、世界中で約 220 の特許および出願中の幅広い IP ポートフォリオを有しています。

顧客参加度： 現在およびターゲット顧客として、グローバルの大規模産業のブルーチップ企業と関与してきました。 また、交換用レーザーや軽エンジンの供給や必要なサービスの実施からも、今後も収益源が生まれると予想しています。

経験豊富なリーダーシップ： 当社は、レーザー業界におけるイノベーションと実行の実績を持つ先駆的で先見の明のある経営陣を擁しています。

成長している市場採用率： すでに 30 社以上のお客様に 50 台以上のシステムを出荷しており、 NASA や AFWERX とパートナーシップを結んでいます。

私たちの成長戦略は

Nuburuは、既存および新興の製造アプリケーションにおいて重要な工業的意義を有する一連の金属にレーザを提供するための、溶接および3 D印刷のための優れたグローバルレーザ供給者となることを目標としている。私たちの成長戦略は2つの世界的な産業トレンドによって駆動されています

私たちの成長戦略の重要な側面には

溶接製品のメンテナンスと開発

Nuburuは青色レーザーを電池、消費電子製品(例えば携帯電話、タブレットと大画面ディスプレイ)、電気自動車と再生可能エネルギーなどの溶接応用の第一選択技術とすることを望んでいる。ブルーレイレーザが達成できる速度、品質と生産量はこれらの市場に入る重要な駆動要素である。NuburuのAO製品ラインはすでに製造分野に入っている

components for cell phones, displays, and wire-feed 3D printing. We expect that Nuburu’s BLTM product line will expand the range of applications that can be addressed by combining the blue laser with a scanner to enable remote welding of batteries, consumer electronics and electric vehicle components. The scanner capability opens market opportunities for the blue laser because of its ability to rapidly move the beam from weld seam to weld seam. This light engine provides the production speed and quality sought by manufacturers for welding batteries, consumer electronics and electrical vehicle components.

Integrate Blue lasers into Directed Energy Deposition 3D Printing

Nuburu has integrated its AO-650 into a DED machine capable of printing parts using blown powder. In a direct comparison, the Nuburu blue laser outperformed an IR laser by a wide margin resulting in a substantial improvement in printing energy efficiency which translates directly to speed, a superior surface finish, and near forged metal densities. While this is a small portion of the additive market, it is an important one that enables our light engines to print large scale parts from a variety of materials such as titanium and copper alloys. The blue laser-based DED machine provided manufacturers with the speed, surface finish and densification required by markets such as aerospace.

Integrate single mode blue laser into additive machines

Nuburu is developing a single mode blue laser ("SM") that we expect to be a drop-in replacement for the IR fiber lasers used in 3D powder bed printers today. This technology is at the center of the Nuburu research and development efforts where the initial demonstration of a single mode blue fiber laser was successful. Nuburu is now working to scale the output power of the laser to its initial offering of 100 Watts CW. This laser is expected to expand the additive space, allowing the fabrication of parts that are 10x the size of parts fabricated with an IR laser, at speeds up to 7x faster for a given power level and to print metals that are reflective in the near IR. This technology is compatible with existing systems, allowing customers the flexibility to upgrade their existing systems to blue as an alternative to ordering an entirely new 3D printing system. The improvement in process speed and part quality is expected to enable the mass adoption of 3D printing in aerospace, healthcare, dentistry, jewelry and other general manufacturing applications.

Next Generation Blue Laser Additive Systems

Nuburu has demonstrated the ability to print metal parts with its APT. We expect that this system will flash print over 2 million spots simultaneously in an area over 1,000x greater than the single spot used in today’s printers. The laser light engines are modular in their design which allows a powder bed printer system to be outfitted with a single light engine or multiple light engines. Multiple light engines provide a path to very high printing speeds, and lower operating costs. This method of printing relies on the conduction mode printing referred to earlier in this document and will not have the complicated fume management systems required in today’s large area printers. A system based on several light engines has the potential to achieve 10-20kg/hr printing speeds while maintaining a 0.050mm minimum part resolution. We expect that a breakthrough in speed while maintaining resolution and part quality will enable adoption in cost sensitive markets such as automotive and consumer products.

With respect to all of the 3D printing applications, Nuburu anticipates growing its capabilities organically or through partnerships or acquisitions.

Extend Blue Laser Capabilities

Nuburu believes it has only started to uncover the many potential applications of this technology beyond the two major markets explored to date: vehicle electrification and 3D printing. With expanded resources we expect to be able to uncover additional applications in defense, healthcare, solar energy and semiconductor processing markets. In addition, we believe that as Nuburu introduces new products they will find applications in the growing market-place.

Please see Item 1A. "Risk Factors" in this Annual Report on Form 10-K for additional discussion of the potential risks related to our product development and growth strategy.

Manufacturing and Supply

Manufacturing

Nuburu is located in Centennial, Colorado with an approximately 30,000 square foot facility. The facility primarily supports applications testing, manufacturing, engineering, and research and development of lasers and laser systems. Approximately 2,400 square feet of our facility is a clean room facility in which the laser light engine modules are manufactured, assembled, and tested. Other areas of the facility facilitate the integration of the laser light engine modules with control and power electronics into a chassis to form laser systems. Completed laser systems undergo testing and quality control within the facility.

We anticipate that our current facility can support the manufacturing volumes forecasted through mid-2025. Needed capacity increases can be accomplished by improvements to the manufacturing line, adding equipment to bottleneck manufacturing steps, as well as expansion of key areas. We expect to be able to improve production flow through modest infrastructure leasehold improvements, such as removal of divisive walls and inclusion of doors and passthroughs in strategic locations. These improvements would allow the product assembly to flow in a continuous uninterrupted line, increasing efficiencies.

Nuburu’s lasers are designed to be compatible with automated manufacturing methods. Nuburu continually improves the design of its lasers as well as the automation equipment required to manufacture these systems. Our strategy for scaling up our existing manufacturing line is based on two key elements: (i) optimizing the automated production flow and (ii) minimizing the touch labor. The automated assembly provides both the needed precision as well as the reproducibility of the assembly to manufacture the high precision blue laser modules. Since the key steps are performed with automated machines, we can minimize both the touch labor as well as the skill set needed for manufacturing. These elements combine to provide Nuburu with a cost effective and scalable manufacturing strategy. However, once the base production

line design is finalized, the entire production line may be replicated as many times as is needed to increase capacity, limited only by space constraints and infrastructure limitations.

Throughout the manufacturing process, Nuburu uses multiple screening steps to check the quality of its products beginning with an initial automated screening test that identifies laser diodes that are below performance standards. For this initial test, six laser diodes are integrated into an assembly and undergo a visual inspection. The diodes are also turned on to quantify their performance and verify that they meet specifications. Those units are then integrated into a screening station and operated for a predetermined period to eliminate early failures, which are referred to as infant mortalities. Once they have passed this first step, they are integrated into a module, which is then tested for performance before integration into a system. After integration into a system, Nuburu uses a week-long test procedure to confirm that the electronics and laser are performing according to specifications.

We expect to work to reduce waste and limit costs while developing robust manufacturing processes with the aim of enhancing our competitive advantage in the marketplace. To do this, we expect to incorporate the Six Sigma Lean methodologies as well as ISO quality standards to ensure we meet customer expectations. With Six Sigma, we expect to further improve the quality of our products and decrease the variations that cause rework or defects. By incorporating the 5S pillars of the Six Sigma process into our day-to-day work life, we expect to develop a streamlined productive work environment ensuring organized and improved cycle times, with the aim of reducing the cost of goods sold. Through these tools we aim to create an environment that demands quality and performance, while reducing downtime and defects that are generated from undefined processes and underutilized talent.

We anticipate that as we ramp up our manufacturing, we will require additional engineers and production personnel to build out and then operate our manufacturing capabilities.

Supply

We purchase raw materials used to manufacture our products and other components, such as laser diodes, micro-optics, optics, optical filters, bulk optics, cooling components, electronic components, and other materials, from various suppliers. We purchase materials and components through purchase orders or agreed-upon terms and conditions with our key suppliers. To mitigate raw material and component supply chain issues and risks, we aim to take a variety of actions such as second source qualification, accumulation of safety stock and vendor surveillance. We may also consolidate our supply base and move supplier locations. If we transition locations, we may increase our inventory of such products as a “safety stock” during the transition, which would cause the amount of inventory reflected on our balance sheet to increase.

Partnerships

Over the past five years, Nuburu has developed a number of partnerships in cell phone component welding systems, display welding systems, and 3D printing.

Key research institutes

Nuburu has established various partnerships, past or current, with prominent welding and 3D printing institutes including Edison Welding Institute in North America, two Fraunhofer institutes and Munich Technical University in Germany, Warwick University (WMG — Energy Innovation Center) in the United Kingdom, Osaka Welding Institute in Japan and Shanghai Jai tung University in China. The purpose of these partnerships has been to validate our own testing and benchmark our metal processing application results against incumbent technologies used in manufacturing, including for example against IR lasers, ultrasonic welding, resistance welding and tungsten inert gas welding.

Key customers & partnerships

Nuburu has also developed key partnerships with selective customers. We have performed hundreds of applications and thousands of test welds for customers and target customers around the world. These applications serve as a validation of customer specific application over a wide range of welding applications including batteries, consumer electronic components, heat sinks for cell phones (vapor chambers), 3C applications such as connectors, PC board interfaces, flex circuits and 3D printing.

The first-generation AO-650 has been qualified by and is already operating in the production of vapor chambers by a key integrator in Asia. Our AO-150 is in the manufacturing qualification stage with two large systems for mask welding by an organic light-emitting diode ("OLED") manufacturer in Asia. We recently also finalized a multi-year supply and license agreement for a 3D printing application with Essentium, a manufacturer of 3D printing platforms. We have delivered our AO blue laser systems to over ten large brands worldwide which have been installed on-site at our customers’ manufacturing facilities and are currently undergoing engineering and manufacturing qualification testing. In 2023, we began delivering our new BLTM product line to both existing and new customers.

Research and Development

We conduct research and development efforts on our laser technology for new products at our headquarters in Colorado and we conduct research on applications at both our headquarters and partner facilities.

Research

We are currently conducting research that aims to continuously improve our blue laser systems. Our laser research is concentrated in two areas: (i) creating the highest possible brightness laser from blue laser diodes and (ii) developing a single mode blue laser source.

Nuburu has been studying numerous methods for increasing the brightness and power levels of its product line. These studies are focused on maximizing the brightness of our direct diode laser technology and include wavelength multiplexing, spectral beam combining and coherent beam combining. Nuburu is also testing numerous methods to build a single mode blue laser system with the aim of maximizing laser performance.

Nuburu is also developing APT that uses millions of laser beams to simultaneously print a portion of a metal part in a single shot. This approach to 3D printing would allow breakthrough speeds and resolution for the parts being printed. This is because current 3D printers work by scanning a laser beam across the powder bed to fuse a very small spot of metal onto the printed part. The printing speed is limited by two factors, the amount of laser energy that can be absorbed by the metal and the speed at which the scanner can move the laser beam. These factors ultimately limit the amount of laser power that can be used and the speed at which any single scanner-based 3D printer can print. This is not the case with Nuburu’s APT, where the millions of laser beams illuminate an area that is approximately 1,000x the size of the spot typically used in a 3D printer ultimately resulting in a radically new approach to 3D printing that greatly reduces spatter and fumes that can cause defects in the parts being produced. We believe that multiple parts can be produced simultaneously on a single build plate without the issue of defects and further, that very large parts can be printed without concerns over part integrity. Nuburu completed a project funded by the Air Force Research Labs through the AFWERX program to develop this large-scale, high-speed 3D printer and is in the process of bidding for another project to further this research.

Nuburu’s APT uses Texas Instruments Digital Light Projector ("DLP") to create a blue laser image on the powder bed with millions of pixel resolution. These devices were designed for large movie theaters and as a result they can handle high blue laser power levels. This provides the ability to create an image on a powder bed that is over 1,000x the size of the spots used today but with sufficient power density to fuse the powder layer by layer into a 3D printed part. The result is higher printing speeds with 0.050mm of resolution in the image from each laser print engine. Multiple laser print engines can be used within a single printer to further increase the printing speed providing a path to 10-20kg/hr printing rates or higher depending on the size of the system. The laser light engine for this type of printer consists of an AO 650H laser, a collimating and homogenizing system, the DLP spatial light modulator and a reimaging system. The AO-650H provides 650 Watts of laser power through a 400µm core optical fiber and a narrow laser bandwidth. The performance of this system can be increased by the incorporation of Nuburu's newly released BLTM product line which has 10x the brightness of the AO-650H.

Product Development

Nuburu’s current product development activities are focused on the BLTM product line, which we have started to bring to the industrial laser marketplace in 2023. This product consists of a high brightness 250-Watt laser system. This product along with its manufacturing method have been under development since 2017 at Nuburu. The development of this system encompasses the design of the laser, its electronics, and an automated manufacturing capability. Since Nuburu is focused on developing laser modules with individual laser sources, the only economical method to manufacture these systems is to fully automate the production process. Nuburu has invested in all of the equipment to accomplish this goal resulting in a pilot production line that is intended to be scalable. This module forms the basis for the multi-mode product line extending from 250 Watts to multi-kWs of laser power. This modularity means that the system output power can be rapidly scaled from today’s single module system to a system that would encompass 16 modules and produce over 4-5kW of laser power. Nuburu has designed all of the mechanical components and electronic components with system scalability in mind. This modular design approach means that the next generation of higher power products that are needed to address a broad market need can be rapidly and efficiently developed.

Intellectual Property

Nuburu currently has approximately 220 granted and pending patents (of which more than 30 are in the United States and the remainder are foreign), including patents and applications directed to blue laser applications such as welding, blue laser technologies, single mode blue laser technologies, blue Raman laser technologies, addressable array technologies, and 3D printing using blue lasers. A number of its patent applications also relate to APT, electronic manufacturing, battery manufacturing, and other blue laser applications. These patents are at various stages of review. Our currently issued patents are expected to expire at various times between 2034 and 2039.

Nuburu’s practice is to apply for patent protection in key countries worldwide and to date we have been successful at securing patents in the United States and other countries. Our foreign rights include protections in Finland, France, Germany, Ireland, Switzerland, Spain, Italy, the United Kingdom, Japan, South Korea, China, and Russia. Our patent portfolio is regularly updated with new provisional applications, regular utility applications, and international and foreign applications, as well as with continuing patent applications being filed as patents are granted to keep the patent families active and to extend our portfolio coverage.

We currently do not license any patents.

Proprietary active alignment

The Nuburu design approach requires extremely precise alignment. The need to maintain precision alignment typically represents a challenge for optical systems intended for use in production environments, but we have developed proprietary active and automated alignment technology that solves this challenge and streamlines laser assembly and leads to robust and reliable performance in the field. That built-in robustness leads to long-term laser output power stability over thousands of hours of operation. Proprietary alignment technology also allows for a modular design approach, which enables both scalable product designs and straightforward production line maintenance. We believe that the active alignment that we have achieved would be very difficult to replicate.

Proprietary single mode technology

In conjunction with the proprietary design of the AO- and BL-series lasers, we hold patents and patent applications for an additional and further breakthrough in technology key to the next generation blue lasers. This technology enables a high-power single mode blue laser. Single mode laser performance provides the ultimate laser beam with the lowest angular divergence and the highest possible power density. This laser can be focused to a smaller spot size than an infrared laser and is the basis for Nuburu’s next generation single laser 3D printer design. In addition, when the single mode laser is combined with an optical scanner, it becomes possible to rapidly weld parts at a considerable distance. Since a blue laser has a substantially lower beam divergence than an IR laser, the standoff distance can be increased, or the spot size can be decreased to increase the precision of the welding process. We expect this ongoing development to position Nuburu as a leader in next-generation blue industrial lasers for the foreseeable future.

Competition

The laser system industry in which we operate has significant price and technological competition. We compete directly with mature competitors such as Coherent, Inc., nLight, Inc., IPG Photonics Corporation, Laserline GmbH, Lumentum Holdings Inc., Raycus Fiber Laser Technologies Co., Ltd. and Trumpf SE + Co. KG, which are well established and have longer operating histories, significantly greater financial and operational resources, and name recognition, which we do not have. However, we also compete with development-stage companies such as TeraDiode Inc. and others. A number of these competitors are seeking to improve conventional IR lasers or to develop new laser technologies, including blue laser technology. We also compete not only with companies providing conventional lasers, but also with companies offering non-laser solutions for the applications we target. Examples of current technologies used or expected to be used in welding and 3D printing applications include:

Infrared Fiber and Disc Lasers: Infrared lasers are the current predominant incumbent technology. However, when used on reflective material, the laser intensity must be increased to a level where the metal vaporizes, which creates spatter on the surface and pores in the weld itself. A higher intensity also results in a smaller spot size and smaller melt area. In order to increase the melt area a scan head is used to “wobble” the beam in a pattern on the workpiece. This technique still creates a weld with excessive porosity and spatter. In addition, the need for a scan head for wobbling increases weld time by up to 10x compared with blue and the capital cost of the scan head and driving software is substantial.

Infrared Fiber Ring Lasers: Another way to improve the absorption of infrared wavelength into reflective material is to increase the temperature of the material prior to welding. A specially developed custom fiber laser or processing head is used to produce a ring of laser light around the main processing beam. This enables pre-heating of the metal before the processing beam. This is still a keyhole process but with some reduction in the heat input. However, this method also produces spatter in the melt area and voids in the weld. This approach also increases the cost of the equipment, as additional power is required. In some cases, two lasers are used, which further increases costs. The resulting process relies on a very precise balance of power in the ring and core and can be difficult to maintain in a production environment. Whilst the ring output approach can show acceptable results in thicker sections it still struggles in foil welding and fine feature applications.

Green Lasers: A more recent introduction in the laser market is the green laser, which can be generated from both a fiber laser and a solid-state laser by using a method called frequency doubling. A non-linear crystal is used to change the color of the laser from the IR to the green. These high-power green lasers are relatively new to the market and are still under evaluation by customers for 3D printing and welding applications. However, green lasers have significant drawbacks. While the wavelength is closer to blue and improvement in absorption is seen compared with IR lasers in typically reflective materials, the improvement is not as large as with blue. Typically, a 20% improvement in absorption is seen in blue compared with green. But the most significant drawback of green lasers is their complexity and poor electrical conversion efficiency. An optical technique known as “frequency doubling” is used to take the output of an IR laser and convert the output to green (i.e., a 2kW IR laser is used to make a 1kW green laser). This requires an additional process of putting the IR beam through a crystal. This is complicated, inefficient and the conversion crystal is considered a consumable, which requires frequent maintenance or replacement due to the deterioration of the non-linear crystals. These characteristics increase the capital and running costs for the manufacturer and also compromise the reliability of the green lasers.

Other Blue Lasers: In general, blue lasers based on an array of diodes in a bar produce lower brightness compared to individual devices because of the limitations of the spacing of the diodes on the bar array. In general, bar arrays thus result in a larger spot size or shorter standoff distance than could easily be achieved with individual devices such as our single chip approach used in our BLTM line of products. There is one company we are aware of that is developing blue laser diode bar technology that overcomes this limitation, but we believe this company’s beam quality is still limited to the multi-mode brightness of the individual laser diode source which would compete with our single mode BL line of products. We believe that our single mode laser greatly exceeds the performance of any of the direct diode laser beam combination methods that we are aware of.

While there are various competing laser technologies all seeking to disrupt the IR laser’s current foothold in various applications, we believe Nuburu’s blue-laser technology is the superior approach. The cost of our blue laser technology is currently greater than that of most conventional IR laser systems and that some potential customers may prioritize purchase price in making their investment decisions. However, we believe that our blue laser technology has the potential to offer our customers a greater return on investment. Nuburu’s blue laser fundamentally improves absorption rates and allows a melting process with no vaporization, which generally results in improved stable, high-quality welds and printed products, with minimal voids and spatter, all achieved using less energy and at increased speeds. We believe that Nuburu blue laser technology offers a superior solution to improving a variety of aspects of welding and 3D printing, providing customers with a broader range of applications than currently possible.

In addition to the technical aspects outlined above, we believe principal competitive factors include technology capabilities, materials, process and application know-how, cost of operation, product reliability, and the ability to provide a full range of products to meet customer needs. We believe that our future success depends on our ability to provide high-quality products, introduce new products to meet evolving customer needs and market opportunities, and extend our technologies to new applications.

Government Regulation and Compliance

We are subject to regulations governing the safe operation of our blue laser products. The lasers we produce are listed as Class IV lasers according to the U.S. Food and Drug Administration’s Center for Disease and Radiological Health (“CDRH”) and must meet all government guidelines for safe operation. Each laser system design must be registered with the CDRH prior to its release to the marketplace. Nuburu lasers also receive the CE mark (signaling that we have checked that our products meet applicable EU safety, health and environmental requirements) once they pass all of the CE certification testing on safety and radiofrequency emissions. This mark is required by most foreign countries to allow them to import our products.

Nuburu is also subject to the export regulations of the U.S. Department of Commerce, Bureau of Industry and Security (“BIS”). We have worked with BIS to classify our current suite of products, and we intend to classify each of our new products prior to releasing them. Nuburu

also has established an export manual that clearly articulates our policies and procedures used to confirm that we are in compliance with applicable U.S. export regulations. All of our employees and distributors worldwide are required to confirm that they will adhere to these policies. Nuburu expects to update its policy and export manual from time to time to reflect any changes required by new export controls or developments in best practices. Currently, neither our AO nor our BL lasers require an export license to export to the list of countries that U.S. companies are permitted to export to. As part of our export process, we check the government’s consolidated screen list before we accept orders or ship lasers to ensure that none of the parties involved are prohibited parties.

Sales and Marketing

Given the size, complexity and value of our blue laser technology, our sales to date have come from long-term discussions between our management team and our current customers. Based on our experiences so far, we expect the approximate adoption timelines of our customers from first contact to first purchase order to range up to 22-24 months. Going forward, we intend to expand our marketing efforts and as we pursue a more widespread adoption of our blue laser technology.

We have developed and trained and expect to continue to develop and train third-party distributors that provide sales and customer support functions in their specific territory, including business development and sales, application and service support and local marketing. Our distributors are and are expected to be an integral part of our sales and marketing strategy. The Americas region is managed from our headquarters, but we have distributor partners located in key countries worldwide to help target current and prospective customers in Asia (particularly in China, Japan, Singapore, South Korea, India and Taiwan) and in Europe.

Our applications lab is key to our sales effort because it allows our customers to test our full range of products to explore various application capabilities and better understand how our lasers might help them address their most challenging manufacturing problems. Our technical team provides on-site support through installation and offers technical support and training to our customers.

Employees and Human Capital

As of February 29, 2024, Nuburu had 46 full-time employees. A significant number of our employees have a technical background and hold advanced engineering or scientific degrees. We are committed to being an employer of choice through increasing diversity in the workforce and building and maintaining a positive and inclusive culture. We view our human capital investments as crucial for our success.
Our work environment is highly collaborative and one that is based on trust and mutual respect. Our team is comprised of highly skilled engineers who take substantial pride and ownership in their work. We take pride in our transparent approach to communicating, whether internally with employees or externally with our partners and customers. We have developed company-wide safety policies based on guidelines from health officials as well as input from our employees to establish and maintain a safe and healthy workplace. The safety of our employees and other key stakeholders is our top priority.

To date, we have not experienced any work stoppages and we consider our relationship with our employees to be good. None of our employees are either represented by a labor union or subject to a collective bargaining agreement.

We anticipate that in order to reach our strategic objectives, we will be required to recruit and retain additional management, human resources, accounting, finance, technical, engineering and sales personnel.

Available Information

Our internet address is https://nuburu.net. We will file or furnish periodic reports and amendments thereto, including our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K (and amendments to those reports), proxy and information statements and other information filed or furnished pursuant to Sections 13(a) and 15(d) of the Exchange Act with the SEC. The SEC maintains a website that contains reports, proxy and information statement, and other information regarding issuers that file electronically, which may be accessed through the SEC at http://www.sec.gov. Our reports, amendments thereto, proxy statements and other information are also made available, free of charge, on our investor relations website at https://ir.nuburu.net as soon as reasonably practicable after we electronically file or furnish such information with the SEC. The information contained on the websites referenced in this Annual Report on Form 10-K is not incorporated by reference into this filing. Further, our references to website URLs are intended to be inactive textual references only. All statements made in any of our securities filings, including all forward-looking statements or information, are made as of the date of the document in which the statement is included, and we do not assume or undertake any obligation to update any of those statements or documents unless we are required to do so by law.

ITEM 1A. RISK FACTORS

An investment in our Common Stock or Preferred Stock involves risks. Prior to making a decision about investing in our Common Stock or Preferred Stock, you should consider carefully the risks together with all of the other information contained in this Annual Report on Form 10-K, including any risks described below. Each of the referenced risks and uncertainties could adversely affect our business, operating results, and financial condition, as well as adversely affect the value of an investment in our securities. Additional risks not known to us or that we believe are immaterial may also adversely affect our business, operating results, and financial condition and the value of an investment in our securities. "Nuburu," "the Company," "we," "us," or "our" refers to Legacy Nuburu prior to the consummation of the Business Combination and to Nuburu following the Business Combination.

Risks Relating to Our Business and Operations

We are an early-stage company with a history of losses. We have not been profitable historically and may not be able to achieve profitability in the future.

Our financial statements as of and for the year ended December 31, 2023 included elsewhere in this Annual Report on Form 10-K have been prepared assuming we will continue as a going concern. If we are unable to generate sufficient cash flow to sustain our operations or raise additional capital in the form of debt or equity financing, this could affect our ability to continue as a going concern in the future. Since its inception in 2015, Nuburu has incurred significant net losses and has used significant cash in its business. As of December 31, 2023, Nuburu had an accumulated deficit of approximately $97.3 million, and for the year ended December 31, 2023, Nuburu had a net loss of approximately $20.7 million. We expect to continue to expand our operations, including by investing in manufacturing, sales and marketing, research and development, and infrastructure to support our growth. We anticipate that we will incur net losses for the foreseeable future and, even if we increase our revenues, there is no guarantee that we will ever become profitable. Our ability to achieve profitability in the future will depend on a number of factors, including:

Even if we do achieve profitability, we may be unable to sustain or increase our profitability in the long term and our business may be disrupted at any time due to numerous factors outside of our control, including changes in the general macroeconomic outlook, local and regional volatility, global trade disputes, political instability, expropriation or nationalization of property, public health emergencies, and related government policies and restrictions designed to mitigate the effects of such emergencies, civil strife, strikes, insurrections, acts of terrorism, hostilities or the perception that hostilities may be imminent, military conflict, acts of war, including sanctions or other restrictive actions, by the United States or other countries, and natural disasters.

We received fewer proceeds from the Business Combination than we initially anticipated. We will require additional capital to finance our operations and implement our business plan and strategy and if we are unable to raise such capital when needed, or on acceptable terms, that could have a material adverse effect on our ability to meet our financial obligations and support continued growth and development.

In connection with the Business Combination, we received cash of $3,243,079, prior to deducting transaction and issuance costs, which costs exceeded this amount received.

We plan to continue to use our cash on hand to fund our operations going forward. Such operations may include additional research and development spending, hiring additional personnel, capital expenditures, including for additional production and applications laboratories facilities, and the costs of operating as a public company. The development, design, manufacture, and sale of our products is a capital-intensive business. Advancing the development of our current and any future products will require a significant amount of capital, including to fund ongoing costs relating to our products and technologies, the construction and tooling of prototypes, the design and building of our production units, as well as any significant unplanned or accelerated expenses, and new strategic investments. As a result, we expect for some time to continue to incur substantial operating expenses without generating sufficient revenues to cover expenditures. We will need to obtain substantial additional funding in order to maintain our continuing operations. In addition, changing circumstances, some of which may be beyond our control, could cause us to consume capital significantly faster than we currently anticipate, and we may need to seek additional funds sooner than planned.

On August 5, 2022, the Company entered into the Lincoln Park Purchase Agreement pursuant to which Lincoln Park agreed to purchase from the Company, at the option of the Company, up to $100,000,000 of Common Stock from time to time over a 48-month period. However, the Lincoln Park Purchase Agreement is subject to certain limitations including but not limited to, the effectiveness of a registration statement covering Common Stock that are issuable to Lincoln Park under the Lincoln Park Purchase Agreement (the “Lincoln Park Registration Statement”). The Company will also be required to satisfy various conditions in order to be able to commence purchases by Lincoln Park under the Lincoln Park Purchase Agreement. Once such conditions are satisfied, purchases by Lincoln Park under the Lincoln Park Purchase Agreement are subject to volume limitations tied to periodic market prices, ownership limitations restricting Lincoln Park from owning more than 9.99% of the then total outstanding Common Stock and a floor price of $1.00 below which Lincoln Park is not required to purchase any shares of Common Stock under the Lincoln Park Purchase Agreement. If any of these conditions are not satisfied or limitations are in effect, we may not be able to utilize all or part of the Lincoln Park Purchase Agreement, which could have an adverse impact on our ability to satisfy our capital needs and could materially adversely impact our business.

We may also obtain further funding through public or private equity offerings, private investment in public equity, or PIPE, offerings, debt financings, joint ventures, partnerships, collaborations, and licensing arrangements, through obtaining credit from financial institutions or other sources. If we raise additional funds through future issuances of equity or convertible debt securities, our then existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences, and privileges superior to those of holders of our Common Stock. If we raise additional funds through issuances of debt, we may be subject to restrictions on our operating activities. However, if we are unable to raise capital when needed or on acceptable terms, that could have a material adverse effect on our continued growth and development and/or we may be forced to cease operations. In addition, if adequate capital is not available to us, it may create substantial doubt among third parties, including suppliers and potential customers. Such doubt could adversely impact our business, reputation, prospects, and our financial statements. The report from our auditors for our financial statements for the year ended December 31, 2023 included a qualification expressing substantial doubt about our ability to continue as a going concern. The inclusion of a going concern qualification could materially limit our ability to raise additional funds through the issuance of equity or debt securities or otherwise.

Our business is currently dependent on a limited number of customers and end markets. A decline in revenue from, or the loss of, any significant customer, could have a material adverse effect on Nuburu’s financial condition and operating results.

Nuburu currently depends upon a small number of customers for a substantial portion of its revenue. During the year ended December 31, 2023, two customers accounted for 39% and 29% of Nuburu's revenue, respectively. During the year ended December 31, 2022, two customers accounted for 47% and 22% of Nuburu’s revenue, respectively. As of December 31, 2023, four customers accounted for 50%, 18%, 13%, and 10% of Nuburu's accounts receivable, respectively. As of December 31, 2022, three customers accounted for 62%, 26%, and 8% of Nuburu’s accounts receivable, respectively. A decline in revenue from, or the loss of, any significant customer could have a material adverse effect on Nuburu’s financial condition and operating results. Nuburu cannot assure: (i) that orders that may be completed, delayed, canceled, or reduced will be replaced with new business; (ii) that Nuburu’s current customers will continue to utilize Nuburu’s services consistent with historical volumes or at all; and/or (iii) that Nuburu’s customers will renew their manufacturing or services contracts with Nuburu on acceptable terms or at all.

Our limited operating history and the novelty of our blue laser systems make evaluating our business, the risks and challenges we may face and our future prospects difficult.

From our inception in 2015 to the present, we have focused principally on developing our blue laser systems, which are the systems we are seeking to commercialize. As a result, we have a limited history operating our business, and therefore a limited history upon which you can base an investment decision.

We began the first shipments of our high performance blue laser system, the BL-250, in 2023. We are also developing additional enhancements to the BL-250, a single mode fiber blue-laser system and blue laser 3D-printing products, which are still in the research and development stage.

Our blue laser systems are new types of products. In light of the fact that the laser industry has already undergone major transitions, from CO2 lasers to infrared fiber lasers, predicting our future revenue depends on the evolution of the market itself and market acceptance of our technology and systems. Moreover, budgeting for our expenses presents some uncertainty because of the unpredictability of the prices of raw

materials and components and other trends that may emerge and affect our business. If actual results differ from our estimates or we adjust our estimates in future periods, our operating results and financial position could be materially and adversely affected. You should consider our prospects in light of the risks and uncertainties emerging companies encounter when introducing new technologies into a competitive landscape.

The engineering of certain of our laser systems is still in the prototype stage, and there is no guarantee that we will be successful in implementing production of our laser systems on a commercial scale.

Our business depends on our ability to succeed in achieving production of our laser systems on a commercial scale. As our laser systems are highly complex, this process is costly and time-consuming, and there can be no guarantee that we will be successful. We have already shipped units of our primary blue laser system, the BL-250, but the ramping up of production and shipment on a commercial scale may be delayed, and we may incur more costs than we expect due, for example, to global supply chain issues that have increased the cost of certain electronic components or have forced us to redesign the system to work around supply chain shortages. In addition, the processes by which we engineer and manufacture our laser systems are still developing rapidly as we explore new processes and different techniques. Our business, reputation, results of operations and financial condition may be materially adversely affected if we are not able to successfully produce our laser systems on a commercial scale or to the extent that it takes us longer to do so or costs more than we expect.

If our laser systems contain design or manufacturing defects, our business and financial results could be harmed.

To date, we have completed prototypes of our laser systems and are ramping up commercial production and shipments of our systems. As our systems also have limited history of commercial operation, we have a limited frame of reference from which to evaluate the longevity and long-term performance of our products. There can be no assurance that we will be able to detect and fix any defects in our products prior to the sale to potential customers. Once we have commenced with commercial production of our laser systems and they are shipped to and installed and put into use by our customers, we may discover latent defects in design, manufacture or construction that may cause our systems not to perform as expected or that may require repair. Our laser systems also require software to operate which may need to be modified and updated over the life of our systems. Software products are inherently complex and often contain defects and errors when first introduced.

There can be no assurance that we will be able to detect and fix any defects in the hardware or software of our laser systems in the design and production phase, and such defects may not become apparent until our systems are adopted and used by customers. In most cases, we should be able to resolve software defects through the application of patches and updates, which can be completed remotely; however, hardware defects may be more difficult to address remotely and may require a system to be returned to us for maintenance and repair.

Our laser systems may not perform consistent with customer expectations or consistent with other laser systems which are currently or may yet become available. Any product defects or any other failure of our laser systems to perform as expected could harm our reputation and result in negative publicity, lost revenue, canceled or delayed deliveries, product liability claims and significant warranty and other expenses, and could have a material adverse impact on our business, financial condition, operating results and prospects.

Insufficient warranty reserves to cover future warranty claims could adversely affect our business, prospects, financial condition, and operating results.

Once we begin shipping our laser systems to customers on a commercial scale, we will need to increase our warranty reserves to cover warranty-related claims. If our warranty reserves are inadequate to cover future warranty claims on our laser systems, our business, prospects, financial condition and operating results could be materially adversely affected. We may become subject to significant and unexpected warranty expenses. There can be no assurances that our then-existing warranty reserves will be sufficient to cover all claims.

The failure of our suppliers to deliver necessary raw materials and components that meet the specifications for our laser systems in a timely manner could cause installation delays, cancellations, and damage to our reputation.

We rely on a limited number of third-party suppliers for some of the raw materials and components for our laser systems, including laser diodes, micro-optics, optics, optical filters, bulk optics, cooling components, electronic components, and other materials that may be in limited supply and which are critical to our ability to produce our laser systems. If any of our suppliers provide insufficient inventory at the level of quality required or if our suppliers are unable or unwilling to provide us with the contracted quantities or in the time frame requested for whatever reason, our results of operations could be materially and negatively impacted. If we fail to develop or maintain our relationships with any of our suppliers and are unable to obtain raw materials or comparable components from alternative suppliers without considerable delay, expense, or at all, or if there is otherwise a shortage or lack of availability of any required raw materials or components, we may be unable to manufacture our laser systems or we may be able to do so only at a higher cost or after a long delay. For example, in recent years there have been, and there continue to be, supply chain bottlenecks and other issues, including a prolonged shortage of microchips, which has required us to redesign our system’s control electronics and has resulted in delays in bringing our systems to market. We have also experienced, and continue to experience, delays with respect to deliveries of various other parts, including electronic components and power supply components. Any further delays could prevent us from delivering our laser systems to customers within required time frames and cause order cancellations.

Moreover, we have in the past and may in the future also experience unanticipated disruptions to operations or other difficulties with our supply chain or internalized supply processes due to exchange rate fluctuations, volatility in regional markets from where materials are obtained, changes in the general macroeconomic outlook, global trade disputes, political instability, expropriation or nationalization of property, public health emergencies and related government policies and restrictions designed to mitigate the effects of such emergencies. The failure by us to obtain raw materials or components in a timely manner or to obtain raw materials or components that meet our quantity and cost requirements could impair our ability to manufacture our products or increase their costs. If we cannot obtain substitute materials or components on a timely basis or on acceptable terms, we could be prevented from delivering our laser systems to customers within required time frames, which could result in sales and installation delays, cancellations, penalty payments, or damage to our reputation, any of which

could have a material adverse effect on our business and results of operations. In addition, we rely on our suppliers to meet quality standards, and the failure of our suppliers to meet or exceed those quality standards could cause delays in the delivery of our products, cause unanticipated servicing costs, and cause damage to our reputation.

We depend on sole source or limited source suppliers, as well as on our own production capabilities, for some of the key components and materials, including, but not limited to, laser diodes and optical filters, which makes us susceptible to supply shortages and other supply chain disruptions and to price fluctuations that could adversely affect our business, particularly our ability to meet our customers’ delivery requirements.

We currently purchase several key components and materials used in the manufacture of our products, including, but not limited to, laser diodes and optical filters, from sole source or limited source suppliers, which may make us more susceptible to supply chain disruptions and cost increases, which may materially adversely affect our operating results and financial condition. If we seek to ramp up production or accelerate delivery schedules of our products, our key suppliers may not have the ability to increase their production in line with our production schedule and our customers’ demands. This may become acute during times of high growth in our customers’ businesses. Our failure to timely receive these key components and materials would likely cause delays in the shipment of our products, which would likely negatively impact both our customer relationships and our business. Some of our products require designs and specifications that are at the cutting edge of available technologies and change frequently to meet rapidly evolving market demands. By their very nature, the types of components used in our products can be difficult and unpredictable to manufacture and in future we may be required to source additional components from sole source or limited source suppliers, which may further expose us to the risks described above.

Many of our customers may also rely on sole source or limited source suppliers. In the event of a disruption of our customers’ supply chain, orders from our customers could decrease or be delayed.

We face various other risks with respect to the supply chain that could adversely affect our business, prospects, financial condition, and operating results.

Some of our suppliers are relatively small private companies that may discontinue their operations at any time and may be particularly susceptible to prevailing economic conditions. Some of our suppliers are located in regions susceptible to natural and man-made disasters, such as the United States, Germany and China, which have experienced severe flooding, earthquakes, wildfires, extreme weather conditions and power loss. Furthermore, financial or other difficulties faced by these suppliers or significant changes in demand for the components or materials produced by these suppliers could limit their availability, as suppliers may choose to discontinue production in the event of falling demand or may be unable to fill orders in the event of increasing demand.

If we are required to identify alternative sources of supply for certain components or redesign our product or production process, this could be difficult and costly, result in management distraction in assisting our current and future suppliers to meet our and our customers’ technical requirements, and cause delays in shipments of our products while we identify, evaluate and test the products of alternative suppliers. Any such delay in shipment would result in a delay or cancellation of our ability to convert such order into revenues.

Any interruption or delay in the supply of any components or materials that we require, or the inability to obtain these components and materials from alternate sources at acceptable prices and within a reasonable amount of time, would impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders or incur substantial penalties. Since many of our products have lengthy qualification periods, our ability to introduce multiple suppliers for parts may be limited. In addition, our failure to achieve adequate manufacturing yields of these items at our manufacturing facilities may materially and adversely affect our operating results and financial condition.

We are highly dependent upon the ability to ship products to customers and to receive shipments of supplies from suppliers.

We are also highly dependent upon the ability to ship products to customers and to receive shipments of supplies from suppliers. In the event of continued disruptions in worldwide or regional shipping, such as the current shipping constraints in the Red Sea and Middle East, our access to supplies and the delivery of products to customers by us or our distributors may correspondingly be negatively impacted. Any such disruptions would likely materially and adversely affect our operating results and financial condition.

If we fail to accurately forecast component and material requirements for our products, we could incur additional costs and significant delays in shipments, which could result in a loss of customers.

We use rolling forecasts based on anticipated product orders and material requirements planning systems to determine our product requirements. It is very important that we accurately predict both the demand for our products and the lead times required to obtain the necessary components and materials. We depend on our suppliers for most of our product components and materials. Lead times for components and materials that we order vary significantly and depend on factors including the specific supplier requirements, the size of the order, contract terms and current market demand for components. For substantial increases in our sales levels of certain products, some of our suppliers may need significant lead time and therefore may not be able to keep up with our needs if we are unable to provide sufficient advanced notice of our requirements. If we overestimate our component and material requirements, we may have excess inventory, which may lead to both an increase in cash usage and an increase in net loss if such excess inventory becomes obsolete and can no longer be sold or only sold at discounted prices. If we underestimate our component and material requirements, we may have inadequate inventory, which could

interrupt and delay delivery production and the associated delivery of our products to our customers. The occurrence or continuance of any of the foregoing risks may materially adversely affect our business and results of operations.

Our systems involve a lengthy sales and installation cycle, and if we fail to close sales on a regular and timely basis it could harm our business. The long sales cycles for our products may cause us to incur significant expenses without offsetting revenues.

In order to make a sale, we must typically provide a significant level of education to prospective customers regarding the use and benefits of our product and our technology (see Item 1. “Business — Sales and Marketing”). The period between initial discussions with a potential customer and the sale of our product typically depends on a number of factors, including the potential customer’s attitude towards innovative products, the potential customer’s budget and whether the potential customer requires financing arrangements. Prospective customers often undertake a significant evaluation process, which may further extend the sales cycle. While our customers are evaluating our products we may incur substantial sales, marketing and research and development expenses in exploring and demonstrating the suitability of our products to a customer’s needs. Once a customer makes a formal decision to purchase our product, the fulfillment of the sales order by us requires a substantial amount of time. This lengthy sales and installation cycle is subject to a number of significant risks over which we have little or no control. Because of both the long sales and installation cycles, we may expend significant resources on attracting prospective customers without having certainty of generating sales.

These lengthy sales and installation cycles also increase the risk that our customers fail to satisfy their payment obligations or cancel orders before the completion of the transaction or delay the planned date for installation. If a customer terminates for convenience, we may be unable to recover some of our costs that we incurred prior to cancellation. We may need to procure long lead time items or place large order lot quantities for critical material well in advance of a termination leaving us with excess inventory. Our operating expenses are based on anticipated sales levels, and certain of our expenses are fixed. If we are unsuccessful in closing sales after expending significant resources or if we experience delays or cancellations, we may incur significant expenses without ever receiving revenue to offset those expenses, which would materially adversely affect our business and results of operations.

Because of the long sales cycles, our operating results and financial condition may fluctuate significantly from quarter to quarter.

We expect that long sales cycles may cause fluctuations in our operating results from quarter to quarter. In light of the standards under which we expect to recognize revenue, small fluctuations in the timing of the completion of our sales transactions could also cause operating results to vary materially from period to period.

In addition to the foregoing described herein, the following factors could also cause our financial condition and results of operations to fluctuate on a quarterly basis:

In addition, our revenue, key operating metrics and other operating results in future quarters may fall short of the expectations of investors and financial analysts, which could have an adverse effect on the price of our Common Stock.

There is no assurance that non-binding letters of intent and other indications of interest from customers will be converted into binding orders, sales, bookings or committed offtake contracts. As a result, our operating results may be materially lower than our expected results of operations.

Our success depends on our ability to generate revenue and operate profitably, which depends in part on our ability to identify target customers and convert such contacts into meaningful orders or expand on current customer relationships. Potential customers may abandon their indications of interest, and non-binding letters of interest may be canceled or delayed by a customer or its terms may be amended in a manner adverse to us in connection with negotiating a definitive sales agreement. For that reason, there can be no assurance that any current or future indications of interest or non-binding letters of intent will result in binding orders or sales. Furthermore, in light of our limited operating history, it is difficult for us to predict the rates at which the non-binding letters of interest in our pipeline will result in binding orders or sales. It is also difficult for us to predict how quickly we will be able to fill binding orders in the event that we obtain multiple orders with the same requested delivery date. In addition, revenue is expected to be recognized in stages, and customers may in some cases delay actual cash payments regardless of progressive billings. Additionally, a customer’s ability to make payments or meet minimum purchase orders could decline during the sales process, as a customer may struggle to procure necessary financing, especially in a higher interest rate environment, or may become insolvent or declare bankruptcy. As a result, our operating results and cash flow may be materially lower than we expect.

If we fail to meet our customers’ price expectations, demand for our products could be negatively impacted and our business and results of operations could suffer.

Our long-term success will depend in part on our ability to price our products competitively. Many factors, including our production and personnel costs and our competitors’ pricing and marketing strategies, can significantly impact our pricing strategies. If we fail to meet our customers’ price expectations in any given period, demand for our products could be negatively impacted and our business and results of operations could suffer.

We expect to contract with a number of large companies that have considerable bargaining power, which may require us to agree to terms and conditions that could have an adverse effect on our business or ability to recognize revenues.

We expect that a number of our potential customers will be large companies. These customers generally have greater purchasing power than smaller entities and, accordingly, often request and receive more favorable terms from suppliers. As we seek to expand our sales, we may be required to agree to terms and conditions that are favorable to our customers and that may affect the timing of our ability to recognize revenue, increase our costs, and have an adverse effect on our business, financial condition, and results of operations. Furthermore, large customers have increased buying power and ability to require onerous terms in our contracts with them, including pricing, annual cost reduction targets, warranties, and indemnification terms. If we are unable to satisfy the terms of these contracts, it could result in liabilities of a material nature, including litigation, damages, additional costs, loss of market share, and loss of reputation.

Additionally, the terms these large customers require, such as most-favored customer or exclusivity provisions, may impact our ability to do business with other customers and generate revenues from such customers. Such customers may also have a greater ability to push back on attempts to pass on increases in our operating and procurement costs.

We currently partner with and derive a portion of our revenue from government entities, and significant changes in the contracting or fiscal policies of such government entities could have an adverse effect on our business and operating results.

We currently partner with and derive a portion of our revenue from contracts with certain government entities, and the growth of our business may be impacted by our partnerships with such government entities and on our successful procurement of additional government contracts. However, demand is often unpredictable from government entities, and there can be no assurance that we will be able to generate further revenue from the public sector. Revenue from government entities for the years ended December 31, 2023 and 2022 amounted to approximately 47% and 47% of our total revenue, respectively. Factors that could impede our ability to generate revenue from government contracts, include, but are not limited to:

The occurrence of any of the foregoing could cause governments and governmental agencies to delay or refrain from purchasing our blue laser technology in the future or otherwise have an adverse effect on our business, operating results, and prospects.

Declines in the prices of our products and services, or in our volume of sales, together with our relatively inflexible cost structure, may adversely affect our financial results.

Our business is subject to price competition. Such price competition may adversely affect our results of operation, especially during periods of decreased demand, as decreased demand would adversely impact the volume of our sales. If our business is not able to offset price reductions resulting from these pressures, or decreased volume of sales due to contractions in the market, by improved operating efficiencies and reduced expenditures, then our operating results will be adversely affected.

Certain of our operating costs are fixed and cannot readily be reduced, which would diminish the positive impact of any cost-saving measures or restructuring programs on our operating results. To the extent the demand for our products slows, or the market for laser systems contracts, we may be faced with excess manufacturing capacity and related costs that cannot readily be reduced, which will adversely impact our financial condition and results of operations.

If we are not able to continue to reduce our cost structure in the future, our ability to become profitable may be impaired.

Over time, we must achieve commercial production levels and effectively manage the manufacturing costs for our laser systems. While we have sought, and will continue to seek, to manage our manufacturing and services costs, the cost of components and raw materials, for example, could increase in the future, particularly if high rates of inflation continue. Any such increases could slow our growth and cause our financial results and operational metrics to suffer. In addition, we may face increases in our other expenses, including increases in wages or other labor costs, as well as marketing, sales, or related costs. We may continue to make significant investments to drive growth in the future. Increases in any of these costs or our failure to achieve expected or contractually required cost reductions could adversely affect our results of operations and financial condition and harm our business and prospects. If we are unable to reduce our cost structure sufficiently in the future, we may not be able to achieve profitability, which could have a material adverse effect on our business and prospects. In addition, until we generate meaningful revenue from sales of our products, we will remain limited in our ability to pass on the cost of any price increases in the cost of components or our operations to our customers.

In the event of future growth, our information technology systems and our internal control over financial reporting and procedures may not be adequate to support our operations.

In the event of future growth, our information technology systems and our internal control over financial reporting and procedures may not be adequate to support our operations. To manage such growth in operations and personnel, we will need to continue to improve our operational, financial and management controls, and reporting systems and procedures. Failure to manage growth effectively could result in an increased risk of fraud, information security vulnerabilities, or other operational difficulties, any of which could adversely affect our business and results of operations.

We are highly dependent on current key executives and if we are unable to attract and retain key employees and hire qualified management, technical, engineering, and sales personnel, our ability to compete and successfully grow our business could suffer.

We believe that our success and our ability to reach our strategic objectives are highly dependent on our ability to recruit and retain key management, technical, engineering, production and sales personnel. In particular, we are highly dependent on the services of Brian Knaley, our Chief Executive Officer, Ron Nicol, our Executive Chairman, Brian Faircloth, our Chief Operating Officer, and Matthew Philpott, our Chief Marketing and Sales Officer. If we are unable to recruit or retain any of our key employees, this could disrupt our operations, delay the development and introduction of our products and services and negatively impact our business, prospects, financial condition, and operating results. For example, a lack of qualified labor to operate our production process may slow our production and impact our production cost and schedule.

We cannot assure you that we will be able to successfully recruit and retain key management, technical, engineering, production and sales personnel, especially the senior leadership necessary to grow our business. Competition for qualified personnel is especially intense in the laser industry and is increasing as there is and for the foreseeable future will continue to be a scarcity of skilled personnel with the requisite experience. As a manufacturing company, many employee roles require the employee to be on-site at our facilities and cannot be conducted remotely, which limits the pool of potential employees for such roles to persons located in proximity to our facilities or who are willing to relocate or commute longer distances.

If we lose a member of our management team or other key employee, it may prove difficult for us to replace him or her with a similarly qualified individual with experience in the laser industry, which could impact our business and operating success. In addition, we do not have “key person” life insurance policies covering any of our officers or other key employees.

Labor disputes could disrupt our ability to serve our customers or lead to higher labor costs.

None of our full-time employees are currently represented by unions or covered by collective bargaining agreements. If a union sought to organize any of our employees, such organizing efforts or collective bargaining negotiations could potentially lead to work stoppages or slowdowns or strikes by certain of our employees, which could adversely affect our ability to serve our customers. Further, settlement of actual or threatened labor disputes or an increase in the number of our employees covered by collective bargaining agreements can have unknown effects on our labor costs, productivity and flexibility.

Our expectations and targets regarding the times when we will launch our products depend in large part upon assumptions, estimates, measurements, testing, analyses and data developed and performed by us, which if incorrect or flawed, could have a material adverse effect on our actual operating results and performance.

Our expectations and targets regarding the times when we will launch our products reflect our current expectations and estimates. Whether we will achieve these objectives when we expect depends on a number of factors, many of which are outside our control, including, but not limited to:

Unfavorable changes in any of these or other factors, most of which are beyond our control, could materially and adversely affect our ability to achieve our objectives when planned and our business, results of operations and financial results.

Certain estimates of market opportunity and forecasts of market growth may prove to be inaccurate.

This Annual Report on Form 10-K includes estimates of our target addressable market and our serviceable addressable market. Market opportunity estimates and growth forecasts, whether obtained or derived from third-party sources or developed internally, are subject to significant uncertainty and are based on assumptions and estimates that may prove to be inaccurate. Recent years have been marred by unexpected events and crises, including natural and man-made disasters, financial crashes, pandemics and political upheaval. If this trend continues, forecasts may prove to be especially unreliable.

The estimates and forecasts in this Annual Report on Form 10-K relating to the size and expected growth of our target addressable market and our serviceable addressable market, market demand and adoption, capacity to address this demand and pricing may also prove to be inaccurate. In particular, estimates regarding our target addressable market and our serviceable addressable market are difficult to predict, especially in light of the nascent stage of our industry. The estimated target addressable market and serviceable addressable market may not materialize for many years or at all, and even if the markets meet the size estimates and growth forecasted in this Annual Report on Form 10-K, our business could fail to capture a meaningful share of the market or grow at similar rates.

Incorrect estimates or assumptions by management in connection with the preparation of our consolidated financial statements could adversely affect our reported assets, liabilities, income, revenue, or expenses.

The preparation of our consolidated financial statements requires management to make critical accounting estimates and assumptions that affect the reported amounts of assets, liabilities, income, revenues or expenses during the reporting periods. Incorrect estimates and assumptions by management could adversely affect our reported amounts of assets, liabilities, income, revenues, and expenses during the reporting periods. If we make incorrect assumptions or estimates, our reported financial results may be over- or understated, which could materially and adversely affect our business, financial condition and results of operations.

Operational costs can be difficult to predict and may include costs from requirements related to the decommissioning of our systems.

We will rely heavily on complex machinery for our operations and our production will involve a significant degree of uncertainty and risk in terms of operational performance and costs. Our laser systems will be comprised of many components. The components of our laser systems may suffer unexpected malfunctions from time to time and will depend on repairs and spare parts to resume operations, which may not be available when needed. Unexpected malfunctions of our laser systems or their constituent components may significantly affect the intended operational efficiency and performance. In addition, our laser systems may need to be decommissioned from time to time, and the related costs could be significant given the expected size and complexity of our laser systems and of our powder bed metal printers in particular. Operational performance and costs, including those related to project stoppage, can be difficult to predict and are often influenced by factors outside of our control, such as, but not limited to, scarcity of natural resources, environmental hazards and remediation, costs associated with

manufacturing, assembling, commissioning, testing or decommissioning of machines, labor disputes and strikes, difficulty or delays in obtaining governmental permits, damages or defects in electronic systems, industrial accidents, fire, seismic activity, and natural disasters. Should operational risks materialize, it may result in the personal injury to or death of workers, the loss of production equipment, damage to manufacturing facilities, monetary losses, delays and unanticipated fluctuations in production, administrative fines, increased insurance costs, and potential legal liabilities, all of which could have a material adverse effect on our business, results of operations, cash flows, financial condition, or prospects.

We expect to incur significant research and development expenses and devote substantial resources to commercializing new products, which could increase our losses and negatively impact our ability to achieve or maintain profitability.

We require significant capital to develop our laser systems and expect to incur significant expenses, including, but not limited to, those relating to research and development, procurement of raw materials and components, capital spending, leases, sales and distribution as we build our brand and market our laser systems, and general and administrative costs as we scale our operations. Our ability to become profitable in the future will not only depend on our ability to successfully develop and market our laser systems, but also to control our costs. If we are unable to efficiently design, appropriately price, and cost-effectively produce, sell and distribute our laser systems, our anticipated margins, profitability and prospects would be materially and adversely affected.

Our ability to use net operating loss (“NOL”) carryforwards and other tax attributes may be limited in connection with the Business Combination and other ownership changes.

We have incurred significant net losses during our history and our ability to become profitable in the near future is uncertain. To the extent that we continue to generate taxable losses, unused losses will carry forward to offset future taxable income, if any, until such unused losses expire (if at all). As of December 31, 2023, we had approximately $56 million and $30 million of federal and state net operating loss carryforwards (“NOLs”), respectively. These amounts included approximately $1.6 million of federal research and development tax credits.

Federal NOLs incurred in tax years beginning after December 31, 2017 and before January 1, 2021 may be carried back to each of the five tax years preceding such loss, and NOLs arising in tax years beginning after December 31, 2020 may not be carried back. Moreover, federal NOLs generated in taxable years ending after December 31, 2017, may be carried forward indefinitely, but the deductibility of such federal NOLs may be limited to 80% of our taxable income annually for tax years beginning after December 31, 2020. Our NOL carryforwards are subject to review and possible adjustment by the Internal Revenue Service (the “IRS”), and state tax authorities. In addition, in general, under Sections 382 and 383 of the Code, a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change NOLs or tax credits to offset future taxable income or taxes. For these purposes, an ownership change generally occurs where the aggregate stock ownership of one or more stockholders or groups of stockholders who own at least 5% of a corporation’s stock increases their ownership by more than 50 percentage points over their lowest ownership percentage within a specified testing period. Our existing NOLs or credits may be subject to limitations arising from previous ownership changes, and we underwent an ownership change in connection with the Business Combination, which may further limit our ability to utilize NOLs or credits under Sections 382 and 383 of the Code. In addition, future changes in our stock ownership, many of which are outside of our control, could result in an ownership change under Sections 382 and 383 of the Code. Our NOLs or credits may also be impaired under state law. Accordingly, we may not be able to utilize a material portion of our NOLs or credits. If we determine that an ownership change has occurred and our ability to use our historical NOLs or credits is materially limited, it would harm our future operating results by effectively increasing our future tax obligations. Section 382 and 383 of the Code would apply to all net operating loss and tax credit carryforwards, whether the carryforward period is indefinite or not. If we earn taxable income, such limitations could result in increased future tax liability to us and our future cash flows could be adversely affected.

Our insurance coverage may not adequately protect us from harm or losses we may suffer.

We may be subject, in the ordinary course of business, to losses resulting from product liability, accidents, acts of God, and other claims against us, for which we may have no insurance coverage. As a general matter, the policies that we do or may have may include significant deductibles, and we cannot be certain that our insurance coverage will be sufficient to cover future losses or claims against us. A loss that is uninsured or which exceeds policy limits may require us to pay substantial amounts, which could adversely affect our financial condition and operating results. Furthermore, although we plan to obtain and maintain insurance for damage to our property and the disruption of our business, this insurance may be challenging to obtain and maintain on terms acceptable to us and may not be sufficient to cover all of our potential losses.

There is no assurance that we will be able to execute on our business model.

Investors should be aware of the difficulties normally encountered by a new enterprise, many of which are beyond our control, including substantial risks and expenses in the course of establishing or entering new markets, developing and commercializing new products and technologies, organizing operations and undertaking marketing activities. The likelihood of our success must be considered in light of these risks, expenses, complications, delays and the competitive environment in which we operate. We will continue to encounter risks and difficulties frequently experienced by pre-commercial and early-commercial stage companies, including scaling up our infrastructure and headcount, and may encounter unforeseen expenses, difficulties or delays in connection with our growth. Any investment in our Company is therefore highly speculative and could result in the loss of your entire investment.

Expanding operations internationally will subject us to a variety of risks and uncertainties that could adversely affect our business and operating results.

We already use suppliers and have made shipments of prototypes and products to customers that are located in different jurisdictions, and as we continue to expand our business we may seek to partner with customers, suppliers and other partners around the world. Managing further

international expansion will require additional resources and controls. Any expansion internationally could subject our business to risks associated with international operations, including:

As a result of these risks, any potential future international expansion efforts that we may undertake may not be successful.

Risks Relating to Our Industry

Our future growth is dependent upon the competition, pace and depth of blue laser adoption, as well as on the growth of certain end markets. If such markets do not develop as we expect, or if they develop more slowly than we expect, our business, prospects, financial condition, and operating results could be adversely affected.

Our future growth depends upon several factors, including the speed at which the market is willing to adopt blue lasers and our ability to penetrate such market. Because the laser industry continues to evolve and is characterized by rapidly changing technologies, changing government regulation and industry standards, and changing consumer and industrial demands and behaviors. Our growth also depends on the growth of and adoption within certain end markets such as electric passenger cars, trucks and buses, healthcare, battery storage technology, consumer electronics, metal 3D printing, and aerospace and defense. The development of such end markets may be influenced by changes in regulatory environments, customer demand, and many other factors beyond our control. If such end markets do not develop as we expect, including if they develop more slowly than we expect, or if they develop in a way that reduces or eliminates the need for metal welding, demand for our laser systems and thus our business, prospects, financial condition, and operating results could be adversely affected.

If the cost of competitive technologies continues to decline, our blue laser technology may not be considered as cost-effective when compared to such competing technologies.

The growth and profitability of our business is also dependent upon our technology being more cost-effective than competing existing technologies, such as infrared lasers, ultrasonic welding and resistance welding. If the cost of competing existing technologies, declines sufficiently, our laser system may not be considered as cost-effective for potential customers, which would decrease the demand for our products. Such a decrease in demand would materially adversely affect our business, prospects ,and results of operations.

Our systems are based on novel technologies to produce blue wavelength lasers, and potential customers may be hesitant to make a significant investment in our technology or switch from the technology they are currently using.

The design of our laser systems are based on novel technologies that are deployed in a novel way and will compete with currently existing technologies, such as infrared fiber lasers. Even if our laser systems are superior to existing lasers in terms of welding speed and energy efficiency, potential customers may choose products from our competitors that are based on existing technologies, such as infrared fiber laser

technology, due to wider market acceptance and familiarity with such technologies. Additionally, potential customers who previously invested in alternatives to our laser systems may not deem a transition to our laser systems to be cost effective. Moreover, given the limited history of our technology, potential customers may be hesitant to make a significant investment in our products, and our business, results of operations, financial condition and prospects could be adversely affected to the extent that customers, for any reason, do not adopt our systems or refuse switching to our systems from the technology they currently employ. If blue laser technology does not achieve market acceptance then our business and results of operations would be materially adversely affected.

The average selling prices of our products could decrease over the life of the product, which may negatively affect our revenue and margins.

The average selling price of our product may decrease over the life of the product, which may reduce our revenue and gross margins. The average selling price for our products may decline as a result of competitive pricing pressures, promotional programs and customers who are able to negotiate price reductions. The pricing of our products depends on the specific features and functions of the product, purchase volumes and the level of sales and services support. We expect competition in our industry to increase in the future. As we experience pricing pressure, we anticipate that the average selling price and gross margin per product will decrease over product lifecycles. We cannot assure you that we will be successful in developing and introducing on a timely basis new products with enhanced features, or that these products, if introduced, will enable us to maintain our average selling price, revenue and gross margins at current levels. Our revenue and gross margin has been and will continue to be affected by a variety of factors including competition, the product mix and average selling price of products, new product introduction, enhancements and the cost of components, overhead absorption, and manufacturing labor. We must manage each of these factors competitively for our gross margins to remain at our desired levels.

We operate in a highly competitive industry and there is increasing competition. Many of our competitors and future competitors may have significantly more financial and other resources than we do and if we do not compete effectively, our competitive positioning and our operating results will be harmed.

The markets in which we intend to compete continue to evolve and are highly competitive. Many of our current and potential competitors are large entities with longer operating histories and in some cases have significantly more financial and other resources, including larger numbers of managerial and technical personnel. These factors may allow our competitors to respond more quickly or efficiently than we can to new or emerging technologies, such as green laser technologies or other technologies yet to be developed. These competitors may engage in more extensive research and development efforts, undertake more far-reaching marketing campaigns and adopt more aggressive pricing policies, which may allow them to compete for customers more effectively.

Our market is characterized by rapid technological changes and evolving standards demanding a significant investment in research and development, and, if we fail to address changing market conditions, our business and operating results will be harmed.

Our market is subject to rapid innovation and technological change. While we intend to invest substantial resources to remain on the forefront of technological development, continuing advances in industrial welding and 3D printing technology, changes in customer requirements and preferences and the emergence of new standards, regulations and certifications could adversely affect adoption of our products either generally or for particular applications. Our ability to compete in the industrial welding and 3D printing market depends, in large part, on our success in developing and introducing our products in a timely fashion, in improving our existing products and technology and finding new applications for our technology. We believe that we must continuously enhance and expand the functionality and features of our products and technologies in order to remain competitive. However, we may not be able to:

Even if we successfully introduce all of the laser welding and powder bed metal printing products currently under development, it is possible that our competitors will develop new products and technologies that will replace our own. As a result, any of our products may be rendered obsolete or uneconomical by our or our competitors’ technological advances, leading to an inability to capture or retain market share, a decline in revenue, and adverse effects to our business and prospects.

Global economic conditions and macroeconomic events may adversely affect us.

In recent years, the United States and other significant markets have experienced cyclical downturns. As a result of the rapid increase in interest rates in 2022 and 2023, many central banks raised target interest rates, which may increase the risk of a recession. Further, the current inflationary environment has caused volatility in the capital and credit markets and uncertainty with respect to the health of the financial markets.

Global economic conditions and macroeconomic events over which we have no control may adversely affect our industry and our business. Economic uncertainty and associated macroeconomic conditions make it extremely difficult for our partners, suppliers, and us to accurately forecast and plan future business activities, especially as investment decisions on capital equipment are highly susceptible to changes in global economic factors.

A significant downturn in the domestic or global economy, or increases in the cost of equipment financed with leases or debt, may cause our customers to pause, delay, or cancel spending on our products or seek to lower their costs by exploring alternatives. To the extent purchases of our products are perceived by customers and potential customers as discretionary, our revenue may be disproportionately affected by delays or reductions in spending. Also, competitors may respond to challenging market conditions by lowering prices and attempting to lure away our customers.

We cannot predict the timing, strength, or duration of any economic slowdown or any subsequent recovery generally, or any industry in particular or how global business and political conditions may change. To the extent that general business, economic or political conditions, including overall changes in demand for our products, decline, our business, financial condition, and results of operations, including revenues, could be materially adversely affected.

The laser industry is experiencing declining average selling prices, which could cause our gross margins to decline and harm our operating results.

Our products may in the future experience a decline in average selling prices (“ASPs”) as a result of increased competition, pressure to reduce prices from significant customers and new product and technology introductions. Newer market participants, particularly in China, have reduced and may continue to reduce, prices of competing products to gain market share. If we are required to reduce the ASPs of our products and we are unable to offset such reductions through increasing our unit volumes, reducing manufacturing costs or introducing new or enhanced products with higher margins, our operating results may be adversely affected. In addition, because of our significant fixed costs, we are limited in our ability to reduce total costs quickly in response to any revenue shortfalls. Because of these factors, we may in the future experience material adverse fluctuations in our operating results on a quarterly or annual basis if the ASPs of our products decline.

If OEM customers and system integrators are reluctant to incorporate our products into their production processes, our financial condition or results of operations may be adversely affected.

Our existing and potential customers include original equipment manufacturers (“OEM”) and system integrators. Our current and future revenues will therefore depend in part upon the ability of our current and potential OEM customers and system integrators to incorporate our laser products into their production processes. The commercial success of such arrangements will depend to a substantial degree on the efforts of these OEM customers and system integrators to develop and market products that are produced using our technologies. Relationships and experience with traditional laser makers, limited marketing resources, reluctance to invest in research and development and other factors affecting these OEM customers and third-party system integrators could have a substantial impact upon our financial results. If OEM customers or integrators are not able to adapt existing tools or develop new production processes to take advantage of the features and benefits of our blue laser technology or if they perceive us to be an actual or potential competitor, then the opportunities to increase our revenues and profitability may be severely limited or delayed.

Furthermore, if our OEM customers or third-party system integrators experience financial or other difficulties that adversely affect their operations, our financial condition or results of operations may also be adversely affected.

Risks Relating to Litigation and Regulation

Changes in laws or regulations, or a failure to comply with any laws and regulations, may adversely affect our business and results of operations.

We are subject to laws and regulations enacted by national, regional, and local governments. Compliance with, and monitoring of, applicable laws and regulations may be difficult, time consuming, and costly. Those laws and regulations and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments, and results of operations. In addition, a failure to comply with applicable laws or regulations, as interpreted and applied, could have a material adverse effect on our business.

Litigation, regulatory actions, and compliance issues could subject us to significant fines, penalties, judgments, remediation costs, negative publicity, and requirements resulting in increased expenses.

We may from time to time be involved in legal proceedings, administrative proceedings, claims and other litigation, with governmental agencies and entities as well as private parties, which arise in the ordinary course of business. In addition, since our laser systems are a new type of product in a nascent market, we may in the future need to seek the amendment of existing regulations or, in some cases, the creation of new regulations, in order to operate our business or sell our products in some jurisdictions. Such regulatory processes may require public hearings concerning our business, which could expose us to subsequent litigation.

Litigation can be expensive, lengthy, and disruptive to normal business operations. Moreover, the results of complex legal proceedings are difficult to predict. Responding to lawsuits brought against us, or legal actions that we may initiate, can be expensive and time-consuming. Unfavorable outcomes or developments relating to proceedings to which we are a party or transactions involving our products, such as judgments for monetary damages, injunctions, or denial or revocation of permits, could have a material adverse effect on our business, financial condition, and results of operations. To the extent such proceedings also generate negative publicity, our reputation and business could also be adversely affected. In addition, handling compliance issues and the settlement of claims could adversely affect our financial condition and results of operations.

Furthermore, our predecessor, Tailwind, was a special purpose acquisition company (“SPAC”). SPACs have been subject to increased regulatory oversight and scrutiny, including from the SEC. Any governmental or regulatory investigation or inquiry related to the Business Combination or otherwise could have a material adverse effect on our business and negatively affect our reputation.

We may be subject to securities litigation, which is expensive and could divert management attention.

The market price of our Common Stock may be volatile and, in the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert management’s attention from other business concerns, which could seriously harm our business.

Our manufacturing facilities are subject to various compliance requirements, including Occupational Safety and Health Administration (“OSHA”), and compliance costs could increase as we plan to scale our operations.

Our manufacturing facilities are subject to numerous federal and state laws and regulations, including those of OSHA, a regulatory agency of the United States Department of Labor. In particular, our facilities are subject to oversight and regulation under local ordinances, building, zoning and fire codes, environmental protection regulation, and other rules and regulations. Though we believe that obtaining and renewing any certificates or licenses required for the operation of our business in compliance with such laws and regulations will be routine, we cannot assure you that we will obtain or renew them in a timely manner. Our failure to hold a given license or certificate, whether by expiration, nonrenewal or modification or termination, may impair our ability to perform our obligations under our customer contracts. Such licenses or certificates may require us to operate in ways that incur substantial compliance costs, particularly as we seek to scale our operations.

The number of laws affecting our business continues to grow and we can give no assurances that we will properly and timely comply with all laws and regulations that may affect us. If we fail to comply with these laws and regulations, we may be subject to legal penalties, which would adversely affect our business, prospects, and results of operations.

Laws, regulations, and rules relating to privacy, information security, and data protection could increase our costs and adversely affect our business opportunities. In addition, the ongoing costs of complying with such laws, regulations, and rules could be significant.

We are subject to various laws regarding privacy, information security and data protection. In particular, our handling of data relating to individuals is subject to a variety of laws and regulations relating to privacy, data protection, and information security, and it may become subject to additional obligations, including contractual obligations, relating to our maintenance and other processing of this data. For example, the European Union’s General Data Protection Regulation, or GDPR, and similar legislation adopted in the U.K., impose stringent data protection requirements and provides for significant penalties for noncompliance. In the United States, California has enacted legislation, the California Consumer Privacy Act, or CCPA, that, among other things, requires covered companies to provide disclosures to California consumers, and afford such consumers abilities to opt-out of certain sales of personal information.

Additionally, the California Privacy Rights Act, or CPRA, was approved by California voters in the November 2020 election. The CPRA significantly modifies the CCPA, creating obligations relating to consumer data which began on January 1, 2022, with enforcement anticipated to commence July 1, 2023. Additionally, other U.S. states continue to propose, and in certain cases adopt, privacy-focused legislation that maintains similarities to the CCPA and CPRA. The U.S. federal government also is contemplating privacy legislation. Laws, regulations, and other actual and potential obligations relating to privacy, data protection, and data security are evolving rapidly, and the regulatory landscape regarding privacy, data protection, and data security is likely to remain uncertain for the foreseeable future. We expect to be subject to new laws and regulations, or new interpretations of laws and regulations, in the future in various jurisdictions. Additionally, we may be bound by contractual requirements applicable to our collection, use, processing, and disclosure of various types of data, and may be bound by, or voluntarily comply with, self-regulatory or other industry standards relating to these matters. These laws, regulations, and other obligations, and changes in their interpretation, could require us to modify our operations and practices, restrict our activities, and increase our costs in the future, and it is possible that these laws, regulations, and other obligations may be inconsistent with one another or be interpreted or asserted to be inconsistent with our business or practices. Any actual or perceived inability to adequately address privacy and security concerns or to comply with applicable laws, rules, regulations, and other actual or asserted obligations relating to privacy, data protection, and information security could result in claims, demands, and litigation by private parties, investigations and other proceedings by regulatory authorities, fines, penalties, and other liabilities, and have an adverse effect on our business, prospects, results of operations, financial position, and reputation.

Our business may depend on the continued availability of rebates, tax credits, and accelerated depreciation schedules, and other financial incentives. The reduction, modification, or elimination of government economic incentives, particularly in the defense and research sectors, and tax policies could cause our revenue to decline and harm our financial results.

The U.S. federal government and some foreign, state, and local governments provide incentives to end users in the form of rebates, tax credits and accelerated depreciation schedules, and other financial incentives. Our business may rely on these governmental rebates, tax credits, and other financial incentives to significantly lower the effective price of our laser systems to our customers. However, these incentives may expire on a particular date, end when the allocated funding is exhausted, or be reduced or terminated as a matter of regulatory or legislative policy. Changes in the availability of rebates, tax credits, and other financial programs and incentives could reduce demand for our laser systems, impair sales financing, and adversely impact our business results.

Unanticipated changes in tax laws may affect future financial results.

Nuburu is a U.S. corporation and thus subject to U.S. corporate income tax on its worldwide operations. Our principal operations and certain potential customers are located in the United States, and as a result, the Company is subject to various U.S. federal, state, and local taxes. New U.S. laws and policy relating to taxes may have an adverse effect on the Company’s business and future profitability. Further, existing U.S. tax laws, statutes, rules, regulations, or ordinances could be interpreted, changed, modified or applied adversely to the Company.

In recent years, the federal government has made significant changes to U.S. tax laws, including through the Tax Cuts and Jobs Act of 2017 (the “Tax Act”) and the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”). On August 16, 2022, the Inflation Reduction Act of 2022 (the “IRA”) was signed into law, with tax provisions primarily focused on implementing a 15% minimum tax on global adjusted financial statement income, effective for tax years beginning after December 31, 2022, and a 1% excise tax on share repurchases occurring

after December 31, 2022. The Company may be subject to the new excise tax with respect to any redemptions of our Preferred Stock. Further, the current administration had previously set forth several tax proposals that would, if enacted, make further significant changes to U.S. tax laws (including provisions enacted pursuant to the Tax Act). Such proposals include, but are not limited to, (i) an increase in the U.S. income tax rate applicable to corporations from 21% to 28%, (ii) an increase in the maximum U.S. federal income tax rate applicable to individuals and (iii) an increase in the U.S. federal income tax rate for long-term capital gain for certain taxpayers with income in excess of a threshold amount. Congress may consider some or all of these proposals in connection with additional tax reform to be undertaken by the current administration. It is unclear whether these or similar changes will be enacted and, if enacted, how soon any such changes could take effect. The passage of any legislation as a result of these proposals and other similar changes in U.S. federal income tax laws could adversely affect our business and future profitability. Investors are urged to consult with their legal and tax advisors with respect to any such legislation and the potential tax consequences of holding our securities.

Significant judgment is required in determining our provision and our valuation allowance for income taxes and other tax liabilities. Although we believe that our tax provisions are reasonable, there can be no assurance that the final determination of any tax audits or tax disputes will not be different from what is reflected in our historical income tax provisions and accruals. To the extent we are required to pay amounts in excess of our reserves, such differences could have a material adverse effect on our consolidated statement of income for a particular future period. In addition, an unfavorable tax settlement could require use of our cash and result in an increase in our effective tax rate in the period in which such resolution occurs.

Additionally, although we currently primarily operate in the United States, we will seek to expand our business operations internationally to other markets including, but not limited to, Europe and Asia. Any international expansion of our business could subject our business to tax risks associated with international operations. For example, tax compliance in various jurisdictions, some of which may have potentially conflicting tax laws, and all of which are subject to change, potentially with retroactive effect, could result in materially higher cash tax liabilities for our business. The tax laws in jurisdictions where we conduct business and applicable U.S. tax laws as they relate to international operations may not act together in a coordinated fashion, which could also result in material incremental taxes for our business. Moreover, an expansion of our business internationally also creates risks that our business could have a taxable presence in jurisdictions where we are not filing tax returns. Taxing authorities, both domestically and internationally, have become increasingly aggressive regarding asserting that companies have a taxable presence in jurisdictions, and our business could face these risks in connection with the internal expansion of our business.

We must comply with and could be impacted by various export controls and trade and economic sanctions laws and regulations that could negatively affect our business and may change due to diplomatic and political considerations outside of our control.

We expect to ship our products to countries throughout the world. Doing business on a global basis requires us to comply with anti-corruption laws and regulations imposed by governments around the world with jurisdiction over our operations, including the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act 2010, as well as the laws of the countries where we do business. We are also subject to various trade restrictions, including trade and economic sanctions and export controls, imposed by governments around the world with jurisdiction over our operations. For example, in accordance with trade sanctions administered by the Office of Foreign Assets Control and the U.S. Department of Commerce, we are subject to limitations on or are prohibited from engaging in transactions involving certain persons and certain designated countries or territories, including Belarus, Cuba, Iran, Syria, North Korea, Russia, and certain occupied territories in Ukraine. In addition, our products are subject to export regulations that can involve significant compliance time and may add additional overhead cost to our products. In recent years the U.S. government has had a renewed focus on export matters. For example, the Export Control Reform Act of 2018 and regulatory guidance have imposed additional controls, and may result in the imposition of further additional controls, on the export of certain “emerging and foundational technologies.” Our current and future products may be subject to these heightened regulations, which could increase our compliance costs.

We are committed to doing business in accordance with applicable anti-corruption laws and regulations and with applicable trade restrictions. If we engage independent sales representatives or distributors for our products or enter into strategic partnerships, we face the risk that such persons or entities and their respective officers, directors, employees, and agents may take action determined to be in violation of such laws and regulations. Any violation by any of these persons could result in substantial fines, sanctions, civil or criminal penalties, or curtailment of operations in certain jurisdictions, and might adversely affect our operating results, even where we had no control over such persons or our control was limited. In addition, actual or alleged violations could damage our reputation and ability to do business.

We could be liable for environmental damages resulting from our operations, which could impact our reputation, our business, and our operating results.

We are subject to federal, state, and local environmental laws and regulations and may become subject to environmental laws in foreign jurisdictions in which we may operate or into which we ship our products. Environmental laws and regulations can be complex and may often change. These laws can give rise to liability for administrative oversight costs, cleanup costs, property damage, bodily injury, fines, and penalties. Capital and operating expenses needed to comply with environmental laws and regulations can be significant, and violations may result in substantial fines and penalties or third-party damages. In addition, environmental laws and regulations such as the Comprehensive Environmental Response, Compensation and Liability Act in the United States impose liability on several grounds including for the investigation and cleanup of contaminated soil and ground water, for building contamination, for impacts to human health and for damages to natural resources. If contamination is discovered in the future at properties formerly owned or operated by us or currently owned or operated by us, or properties to which hazardous substances were sent by us, it could result in our liability under environmental laws and regulations. Many of our current and future customers have high sustainability standards, and any environmental noncompliance by us could harm our reputation and impact a customer’s buying decision. The costs of complying with environmental laws, regulations, and customer requirements, and any claims concerning noncompliance or liability with respect to contamination in the future, could have a material adverse effect on our financial condition or our operating results.

The Public Warrant Agreement designates the courts of the State of New York or the United States District Court for the Southern District of New York as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by holders of our warrants, which could limit the ability of warrant holders to obtain a favorable judicial forum for disputes with us.

The Warrant Agreement between Continental Stock Transfer & Trust Company, as warrant agent, and the Tailwind, dated September 9, 2020, pursuant to which the Public Warrants were issued (as it may be amended, supplemented or otherwise modified from time to time, the “Warrant Agreement”) provides that, subject to applicable law, (i) any action, proceeding or claim against us arising out of or relating in any way to the Warrant Agreement will be brought and enforced in the courts of the State of New York or the United States District Court for the Southern District of New York, and (ii) that we irrevocably submit to such jurisdiction, which jurisdiction will be the exclusive forum for any such action, proceeding or claim. Under the Warrant Agreement, we also agree that we will waive any objection to such exclusive jurisdiction and that such courts represent an inconvenient forum.

Notwithstanding the foregoing, these provisions of the Warrant Agreement do not apply to suits brought to enforce any liability or duty created by the Exchange Act or any other claim for which the federal district courts of the United States of America are the sole and exclusive forum. Additionally, this provision does not apply to claims under the Securities Act, over which the federal and state courts have concurrent jurisdiction. Any person or entity purchasing or otherwise acquiring any interest in any of our warrants will be deemed to have notice of and to have consented to the forum provisions in the Warrant Agreement.

If any action, the subject matter of which is within the scope of the forum provisions of the Warrant Agreement, is filed in a court other than a court of the State of New York or the United States District Court for the Southern District of New York (a “foreign action”) in the name of any holder of our warrants, such holder will be deemed to have consented to: (x) the personal jurisdiction of the state and federal courts located in the State of New York in connection with any action brought in any such court to enforce the forum provisions (an “enforcement action”), and (y) having service of process made upon such warrant holder in any such enforcement action by service upon such warrant holder’s counsel in the foreign action as agent for such warrant holder.

This choice-of-forum provision may limit a warrant holder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us, which may discourage such lawsuits. Alternatively, if a court were to find this provision of the Warrant Agreement inapplicable or unenforceable with respect to one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could materially and adversely affect our business, financial condition, and results of operations and result in a diversion of the time and resources of our management and board of directors.

Risk Relating to Intellectual Property

We may be unable to protect, defend, maintain, or enforce our intellectual property rights for the intellectual property on which our business depends, including against existing or future competitors. Failure to protect defend, maintain and enforce that intellectual property could result in our competitors offering similar products, potentially adversely affecting our growth and success.

Our commercial success will depend in part on our success in obtaining and maintaining issued patents, trademarks and other intellectual property rights in the United States and elsewhere and protecting our proprietary technology. If we do not adequately protect our intellectual property and proprietary technology, competitors may be able to use our technologies we have acquired in the marketplace and erode or negate any competitive advantage we may have, which could harm our business and ability to achieve profitability.

Our intellectual property is critical to our business and although we have taken many protective measures to protect our trade secrets, including agreements, limited access, segregation of knowledge, password protections, and other measures, policing unauthorized use of proprietary technology can be difficult and expensive. Also, litigation may be necessary to enforce our intellectual property rights, protect our trade secrets, or determine the validity and scope of the proprietary rights of others. Such litigation may result in our intellectual property rights being challenged, limited in scope, or declared invalid or unenforceable. We cannot be certain that the outcome of any litigation will be in our favor, and an adverse determination in any such litigation could impair our intellectual property rights and may harm our business, prospects and reputation.

We have already and expect to continue to incur substantial expense and costs in protecting, enforcing and defending our intellectual property rights against third parties. Future litigation relating to protecting our rights could be time consuming and expensive. We rely primarily on patent, copyright, trade secret, and trademark laws, and non-disclosure, confidentiality, and other types of contractual restrictions to establish, maintain, and enforce our intellectual property and proprietary rights. However, our rights under these laws and agreements afford us only limited protection and the actions we take to establish, maintain, and enforce our intellectual property rights may not be adequate. For example, our trade secrets and other confidential information could be disclosed in an unauthorized manner to third parties, our owned or licensed intellectual property rights could be challenged, invalidated, circumvented, infringed, or misappropriated or our intellectual property rights may not be sufficient to provide us with a competitive advantage, any of which could have a material adverse effect on our business, financial condition, or operating results. In addition, the laws of some countries do not protect proprietary rights as fully as do the laws of the United States or may even formally or tacitly encourage the piracy of foreign intellectual property. As a result, we may not be able to protect our proprietary rights adequately abroad.

We rely, in part, on our ability to obtain, maintain, expand, enforce, and defend the scope of our intellectual property portfolio or other proprietary rights, including the amount and timing of any payments we may be required to make in connection with the licensing, filing, defense, and enforcement of any patents or other intellectual property rights. The process of applying for and obtaining a patent is expensive, time-consuming, and complex, and we may not be able to file, prosecute, maintain, enforce, or license all necessary or desirable patent applications at a reasonable cost, in a timely manner, or in all jurisdictions where protection may be commercially advantageous, or we may not be able to protect our proprietary rights at all. We may not be successful in protecting our proprietary rights, and unauthorized parties may be able to obtain and use information that we regard as proprietary.

Though an issued patent is presumed valid and enforceable, its issuance is not conclusive as to its validity or its enforceability and it may not provide us with adequate proprietary protection or competitive advantages against competitors with similar products. Patents, if issued, may be challenged, deemed unenforceable, invalidated, or circumvented. Proceedings challenging our patents could result in either loss of the patent, or denial or the patent application or loss or reduction in the scope of one or more of the claims of the patent or patent application. In addition, such proceedings may be costly. Thus, any patents that we may own may not provide any protection against competitors. Furthermore, an adverse decision may result in a third party receiving a patent right sought by us, which in turn could affect our ability to commercialize our products.

Competitors could purchase our products and attempt to replicate or reverse engineer some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our patents, or develop and obtain patent protection for more effective technologies, designs or methods. We may be unable to prevent the unauthorized disclosure or use of our technical knowledge or trade secrets by consultants, suppliers, vendors, former employees and current employees.

Further, the laws of some foreign countries do not protect our proprietary rights to the same extent as the laws of the United States.

In addition, proceedings to enforce or defend our patents could put our patents at risk of being invalidated, held unenforceable or interpreted narrowly. Such proceedings could also provoke third parties to assert claims against us, including that some or all of the claims in one or more of our patents are invalid or otherwise unenforceable. If any of our patents covering our products are invalidated or found unenforceable, or if a court found that valid, enforceable patents held by third parties covered one or more of our products, our competitive position could be harmed or we could be required to incur significant expenses to enforce or defend our rights.

The degree of future protection for our proprietary rights is uncertain, and we cannot ensure that:

Even if we are able to obtain patent protection, such patent protection may be of insufficient scope to achieve our business objectives. Issued patents may be challenged, narrowed, invalidated or circumvented. Decisions by courts and governmental patent agencies may introduce uncertainty in the enforceability or scope of patents owned by or licensed to us. Furthermore, the issuance of a patent does not give us the right to practice the patented invention. Third parties may have blocking patents that could prevent us from marketing our own products and practicing our own technology. Alternatively, third parties may seek approval to market their own products similar to or otherwise competitive with our products. In these circumstances, we may need to defend or assert our patents, including by filing lawsuits alleging patent infringement. In any of these types of proceedings, a court or agency with jurisdiction may find our patents invalid, unenforceable or not infringed; competitors may then be able to market products and use manufacturing and analytical processes that are substantially similar to ours. Even if we have valid and enforceable patents, these patents still may not provide protection against competing products or processes sufficient to achieve our business objectives.

We may be subject to third-party claims of infringement, misappropriation or other violations of intellectual property rights, or other claims challenging our agreements related to intellectual property, which may be time consuming and costly to defend, and could result in substantial liability.

Companies, organizations, or individuals, including our competitors, may hold or obtain patents, trademarks, or other proprietary rights that they may in the future allege are infringed by our products or services. These companies holding patents or other intellectual property rights allegedly relating to our technologies could, in the future, make claims or bring suits alleging infringement, misappropriation, or other violations of such rights, or otherwise assert their rights and by seeking royalties, lost profits, treble damages, attorney fees and injunctions. If a claim is successfully brought in the future and we or our products are determined to have infringed, misappropriated, or otherwise violated a third party’s intellectual property rights, we may be required to do one or more of the following:

Any of the foregoing could adversely affect our business, prospects, operating results, and financial condition. In addition, any litigation, whether to protect our intellectual property to defend against the claims of others, whether or not valid, could harm our reputation, result in substantial costs and can be disruptive to our business operations by diverting attention and energies of management and key technical personnel and by increasing our costs of doing business.

We may also license technology from third parties and incorporate components supplied by third parties into our products, which could result in our having to incur significant costs. If we are unable to enter into the necessary licenses on acceptable terms or at all, if any necessary licenses are subsequently terminated, if the licensors fail to abide by the terms of the licenses or fail to prevent infringement by third parties, or if the licensed patents or other rights are found to be invalid or unenforceable, our business may suffer. We may in the future face claims that our use of such technology or components infringes or otherwise violates the rights of others, which would subject us to the risks described above. We may in some cases seek indemnification from our licensors or suppliers under our contracts with them, but our rights to indemnification or our suppliers’ resources may be unavailable or insufficient to cover our costs and losses.

In addition, we generally indemnify our customers with respect to infringement by our products of the proprietary rights of third parties. However, third parties may assert infringement claims against our customers. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers, regardless of the merits of these claims. If any of these claims succeed or settle, we may be forced to pay damages or settlement payments on behalf of our customers or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.

Our patents and, patent applications if issued, may not provide adequate protection to create a barrier to entry. The provisional and non-provisional patent applications that we own may not issue as patents or provide adequate protection to create a barrier to entry, which may hinder our ability to prevent competitors from selling products similar to ours.

We continue to have several patent applications pending and we cannot be certain that our pending patent applications will result in issued patents or that any of our already issued patents will afford protection against a competitor. The status of patents involves complex legal and factual questions, and the breadth of claims allowed is uncertain and can vary from country to country. As a result, we cannot be certain that the patent applications that we intend to file will result in patents being issued or that our patents and any patents that may be issued to us in the future will afford protection against competitors with similar technology. In addition, patent applications filed in foreign countries are subject to laws, rules, and procedures that differ from those of the United States, and thus we cannot be certain that foreign patent applications related to issued U.S. patents will be issued in other regions. Furthermore, even if these patent applications are accepted and the associated patents issued, some foreign countries provide significantly less effective patent enforcement than in the United States.

The U.S. Patent and Trademark Office (the "USPTO") and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In addition, periodic maintenance fees on issued patents often must be paid to the USPTO and foreign patent agencies over the lifetime of the patent. While an unintentional lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Even if a lapse is cured, reviving the patent or application, there is a risk that the revival can be challenged by third parties in proceeding and litigation, and that the revival can be overruled. Non-compliance events that could result in abandonment or lapse of a patent or patent application include failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. If we fail to maintain the patents and patent applications covering our products, we may not be able to stop a competitor from marketing products that are the same as or similar to our products, which would have a material adverse effect on our business.

In addition, patents issued to us may be infringed upon or designed around by others and others may obtain patents that we need to license or design around, either of which would increase costs and may adversely affect our business, our prospects, and our operating results.

In addition, we may in the future be subject to claims by our former employees or consultants asserting an ownership right in our patents, patent applications or other intellectual property, as a result of the work they performed on our behalf. Our general requirement that our employees and consultants and any other partners or collaborators who have access to our proprietary know-how, information or technology assign or grant similar rights to their inventions to us may not fully protect us from intellectual property claims.

Additionally, we cannot be certain that we have executed such agreements with all parties who may have contributed to our intellectual property, nor can we be certain that our agreements with such parties will be upheld in the face of a potential challenge, that such agreements will adequately protect us, or that they will not be breached, for which we may not have an adequate remedy.

We may also become involved in other proceedings, such as reexamination, inter parties review, post grant review, derivation or opposition proceedings before the USPTO or other jurisdictional body relating to our intellectual property rights or the intellectual property rights of others. Adverse determinations in a judicial or administrative proceeding or failure to obtain necessary licenses could prevent us from manufacturing our products or using product names, which would have a significant adverse impact on our business, financial condition and results of operations.

We may not be able to protect our intellectual property rights throughout the world.

A company may attempt to commercialize competing products utilizing our proprietary design, trademarks or trade names in foreign countries where we do not have any patents or patent applications and where legal recourse may be limited. This may have a significant commercial impact on our foreign business operations.

Filing, prosecuting and defending patents or trademarks on our current and future products in all countries throughout the world would be prohibitively expensive. The requirements for patentability and trademarking may differ in certain countries, particularly developing countries. The laws of some foreign countries do not protect intellectual property rights to the same extent as laws in the United States.

Consequently, we may not be able to prevent third parties from utilizing our inventions and trademarks in all countries outside the United States. Competitors may use our technologies or trademarks in jurisdictions where we have not obtained patent or trademark protection to develop or market their own products and further, may export otherwise infringing products to territories where we have patent and trademark protection, but enforcement on infringing activities is inadequate. These products or trademarks may compete with our products or trademarks, and our patents, trademarks or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trademarks and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents and trademarks or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent and trademarks rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents and trademarks in those jurisdictions, as well as elsewhere at risk of being invalidated or interpreted narrowly and our patent or trademark applications at risk, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Certain countries in Europe and certain developing countries, including India and China, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In those countries, we may have limited remedies if our patents are infringed or if we are compelled to grant a license to our patents to a third party, which could materially diminish the value of those patents. This could limit our potential revenue opportunities. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we own or license. Finally, our ability to protect and enforce our intellectual property rights may be adversely affected by unforeseen changes in foreign intellectual property laws.

Changes in U.S. patent law could diminish the value of patents in general, thereby impairing our ability to protect our intellectual property rights.

Changes in either the patent laws or in interpretations of patent laws in the United States may diminish the value of our intellectual property. We cannot predict the breadth of claims that may be allowed or enforced in our patents or in third party patents. In addition, a third party that files a patent application before us could be awarded a patent covering an invention of ours even if we had made the invention before it was made by such third party. This will require us to be cognizant of the time from invention to filing of a patent application. Since patent applications in the United States are confidential for a period of time after filing or until issuance, we cannot be certain that we or our licensors were the first to either file any patent application related to our products or services or invent any of the inventions claimed in our or our licensor’s patents or patent applications.

Third parties may also submit prior art to the USPTO during patent prosecution, which could adversely affect our ability to obtain a patent and it is also possible for third parties to challenge granted patents through Patent Office proceedings such as post-grant review, inter partes review and derivation proceedings. A lower evidentiary standard is imposed in USPTO proceedings compared to the evidentiary standard in U.S. federal courts necessary to invalidate a patent claim. As such, a third party could potentially provide evidence in a USPTO proceeding sufficient for the USPTO to hold a claim invalid even though the same evidence would be insufficient to invalidate the claim if first presented in a district court action. Accordingly, a third party may attempt to use the USPTO procedures to invalidate our patent claims that would not have been invalidated if first challenged by the third party as a defendant in a district court action. The uncertainties and costs surrounding the prosecution of our owned or in-licensed patent applications and the enforcement or defense of our owned or in-licensed issued patents could have a material adverse effect on our business.

Recent U.S. Supreme Court rulings have also narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations. In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. Depending on decisions by Congress, the federal courts and the USPTO, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors.

Many of our employees and consultants were previously employed at or engaged by other laser companies, including our competitors or potential competitors. Some of these employees, consultants and contractors, may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Our efforts to ensure that our employees and consultants do not use the intellectual property, proprietary information, know how or trade secrets of others in their work for us may not be successful, and we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual property or disclosed the alleged trade secrets or other proprietary information, of these former employers or competitors.

Additionally, we may be subject to claims from third parties challenging our ownership interest in intellectual property we regard as our own, based on claims that our employees or consultants have breached an obligation to assign inventions to another employer, to a former employer,

or to another person or entity. Litigation may be necessary to defend against any other claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages, a court could prohibit us from using technologies or features that are essential to our products, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies or features that are important or essential to our products could have a material adverse effect on our business, financial condition and results of operations, and may prevent us from selling our products. In addition, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. Any litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could have an adverse effect on our business, financial condition and results of operations.

If we are unable to protect the confidentiality of our other proprietary information, our business and competitive position may be harmed.

In addition to patent protection, we also rely on protection of trade secrets, know-how and other proprietary information that is not patentable or that we elect not to patent. However, trade secrets can be difficult to protect and some courts are less willing or unwilling to protect trade secrets. To maintain the confidentiality of our trade secrets and proprietary information, we rely heavily on confidentiality provisions that we have in contracts with our employees, consultants, collaborators and others upon the commencement of their relationship with us. We cannot guarantee that we have entered into such agreements with each party that may have or have had access to our trade secrets or proprietary technology and processes. We may not be able to prevent the unauthorized disclosure or use of our technical knowledge or other trade secrets by such third parties, despite the existence generally of these confidentiality restrictions. These contracts may not provide meaningful protection for our trade secrets, know-how, or other proprietary information in the event the unwanted use is outside the scope of the provisions of the contracts or in the event of any unauthorized use, misappropriation, or disclosure of such trade secrets, know-how, or other proprietary information. There can be no assurance that such third parties will not breach their agreements with us, that we will have adequate remedies for any breach, or that our trade secrets will not otherwise become known or independently developed by competitors. The protections we place on our intellectual property or other proprietary rights may not be sufficient. Monitoring unauthorized use and disclosure of our intellectual property is difficult, and we do not know whether the steps we have taken to protect our intellectual property or other proprietary rights will be adequate. In addition, the laws of many foreign countries will not protect our intellectual property or other proprietary rights to the same extent as the laws of the United States. Consequently, we may be unable to prevent our proprietary technology from being exploited abroad, which could affect our ability to expand to international markets or require costly efforts to protect our technology. To the extent our intellectual property or other proprietary information protection is incomplete, we are exposed to a greater risk of direct competition. A third party could, without authorization, copy or otherwise obtain and use our products or technology, or develop similar technology. Our competitors could purchase our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts or design around our protected technology. Our failure to secure, protect and enforce our intellectual property rights could substantially harm the value of our products, brand and business. The theft or unauthorized use or publication of our trade secrets and other confidential business information could reduce the differentiation of our products and harm our business, the value of our investment in development or business acquisitions could be reduced and third parties might make claims against us related to losses of their confidential or proprietary information. Any of the foregoing could materially and adversely affect our business, financial condition and results of operations.

Further, it is possible that others will independently develop the same or similar technology or products or otherwise obtain access to our unpatented technology, and in such cases we could not assert any trade secret rights against such parties. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our trade secret rights and related confidentiality and nondisclosure provisions. If we fail to obtain or maintain trade secret protection, or if our competitors obtain our trade secrets or independently develop technology or products similar to ours or competing technologies or products, our competitive market position could be materially and adversely affected.

We also seek to preserve the integrity and confidentiality of our data and other confidential information by maintaining physical security of our premises and physical and electronic security of our information technology systems. While we have confidence in these individuals, organizations and systems, agreements or security measures may be breached and detecting the disclosure or misappropriation of confidential information and enforcing a claim that a party illegally disclosed or misappropriated confidential information is difficult, expensive and time-consuming, and the outcome is unpredictable. Further, we may not be able to obtain adequate remedies for any breach.

Other Risks

Cyber-attacks and other disruptions, security breaches, and incidents could have an adverse effect on our business, harm our reputation, and expose us to liability.

Computer malware, viruses, physical or electronic break-ins, and similar disruptions and security breaches or incidents could lead to interruption and delays in our services and operations and loss, misuse or theft of data, financial information, and Company funds. Computer malware, viruses, ransomware and other malicious code, and hacking and phishing attacks have become more prevalent and may occur on our systems in the future. Threats to and vulnerabilities in our systems and infrastructure and those of our third party service providers may result from human error, fraud, or malice on the part of our employees or third-party service providers or by malicious third parties, including state-sponsored organizations with significant financial and technological resources, or from accidental technological failure. Attempts by cyber attackers or others to disrupt our services or systems or those of our third-party service providers, as well as employee or service provider error or malfeasance, technical failures, or other causes of security breaches and incidents could harm our business, result in a loss of intellectual property, result in claims, demands, and litigation by private parties, investigations and other proceedings by regulatory authorities, fines, penalties, and other liabilities, introduce liability to data subjects, result in the misappropriation of funds, be expensive to remedy and damage our reputation or brand. Efforts to prevent cyber attackers from entering and disrupting computer systems are expensive to implement, and we may not be able to cause the implementation or enforcement of such preventions with respect to our third-party service providers. Despite

the security measures that we and our service providers utilize, our infrastructure and that of our service providers may be vulnerable to physical break-ins, ransomware, computer viruses, other malicious code attacks by hackers, phishing attacks, social engineering, or similar disruptive problems. Though it is difficult to determine what, if any, harm may directly result from any specific interruption, attack or other security breach or incident, any failure to maintain performance, reliability, security and availability of systems and technical infrastructure may, in addition to other losses and liabilities, harm our reputation, brand and ability to attract customers.

As our business and the number of employees grows, the possibility of human error leading to information technology incidents will also increase. Our information technology systems may also not be adequate to support our operations and may introduce opportunities for security breaches and incidents that may interrupt business operations and permit bad actors to obtain unauthorized access to systems, to misappropriate funds, and result in unauthorized access to, or unauthorized use, acquisition, disclosure, loss, corruption, or other processing of personal, confidential, or other sensitive information. Increases in remote work have increased cybersecurity risks, and acts by Russia and associated actors in connection with the conflict between Russia and Ukraine could include cyber-attacks that could disrupt the economy more generally or that could also impact our operations directly or indirectly. We and our third-party service providers also may face difficulties or delays in identifying, responding to, and otherwise mitigating security breaches and incidents, and we could be forced to expend significant financial and operational resources in response to any actual or perceived security breach or security incident, including in repairing system damage, increasing cybersecurity protection costs by deploying additional personnel and modifying or enhancing our protection technologies, investigating and remediating any information security vulnerabilities, notifying affected individuals and otherwise remediating or responding to any such breach or incident, and litigating and resolving regulatory investigations and other proceedings and legal claims and litigation, all of which could divert resources and the attention of our management and key personnel.

Costs, expenses, and other liabilities relating to any actual or perceived disruption or security breach or incident may not be covered adequately by insurance, and may result in an increase in our costs for insurance or insurance not being available to us on economically feasible terms, or at all. Insurers may also deny us coverage as to any future claim. Any of these results could harm our financial condition, business and reputation.

Natural disasters, unusual weather conditions, epidemic outbreaks, terrorist acts, and political events could disrupt our business. Interruption or failure of our infrastructure could hurt our ability to effectively perform our daily operations and provide and produce our products and services, which could damage our reputation and harm our operating results.

We are vulnerable to natural disasters and significant disruptions including floods, earthquakes, fires, hail storms, snow storms, water shortages, other extreme or unusual weather conditions, epidemics or pandemics, acts of terrorism, war or disruptive political events where our facility is located, or where our third-party suppliers’ facilities are located, power shortages, and blackouts and aging infrastructures. Furthermore, climate change appears to have increased, and may continue to increase, the rate, size, and scope of these natural disasters. In the event of such a natural disaster or other disruption, we could experience disruptions to our operations or the operations of suppliers, subcontractors, distributors or customers, which could affect our ability to fulfill our customer contracts or damage our reputation, which would have a material adverse effect on our business, financial condition, and results of operations.

We may engage in a wide array of potential strategic transactions, which could require significant management attention, disrupt our business, dilute stockholder value, and adversely affect our operating results and financial condition.

As part of our business strategy, we may engage in a wide array of potential strategic transactions, including acquisitions of businesses, new technologies, services, and other assets, and strategic investments that complement our business, such as to accelerate our presence in the 3D printing metal systems market. Any such transactions may involve numerous risks, which could harm our business and negatively affect our financial condition and results of operations. There is no assurance that any transaction undertaken will result in a completed transaction, despite the time and resources expended. Furthermore, if we do complete such transactions, they may not translate into successful business opportunities and we may not realize the benefits or synergies we had anticipated. Additionally, we may have to pay cash, incur debt, or issue equity securities to pay for any such transactions, each of which could affect our financial condition or the value of our capital stock, result in dilution to our equity holders, increase our fixed obligations, or require us to comply with covenants or other restrictions that would impede our ability to manage our operations. The direct costs of these transactions, as well as the resources required to evaluate, negotiate, integrate, and promote these acquisitions, may divert significant time and resources from the general operation of our business and require significant attention from management, all of which could disrupt the ordinary functioning of our business and adversely affect our operating results.

In addition, we may issue up to $100,000,000 of Common Stock from time to time over a 48-month period under the Lincoln Park Purchase Agreement. Holders of Common Stock will experience dilution in connection with any issuances of Common Stock under the Lincoln Park Purchase Agreement. Pursuant to the Lincoln Park Purchase Agreement, the Company issued to Lincoln Park in connection with the Closing 200,000 shares of Common Stock in consideration for entering into the Lincoln Park Purchase Agreement and an additional 400,000 shares of Common Stock on March 2, 2023, representing the number of shares equal to $2,000,000 divided by the lesser of (x) $10.00 per share or (y) the average closing price of the Common Stock for the 10 consecutive business days prior to the date that is 30 days after the Closing, provided that if such average closing price is below $5.00 per share, then the average closing price shall be deemed to be $5.00 per share (the price was deemed to be $5.00 per share). Holders of Common Stock experienced dilution in connection with the issuances of such commitment shares to Lincoln Park and will experience further dilution upon conversion of shares of Preferred Stock (including those already issued at Closing), shares issued upon conversion of the Convertible Senior Notes, or shares issued upon the exercise of the warrants issued in connection with with the Senior Convertible Notes or the Junior Notes (refer to Note 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information on these notes and warrants). Such dilution or any decline in the prevailing market price of our Common Stock, whether due to the foregoing or due to sales by holders of Common Stock, may limit our ability to use our securities in connection with a potential strategic transaction or may require increased dilution in the event that we pursue a potential strategic transaction using our securities to pay for such transaction.

Negative publicity could result in a decline in our growth and have a material adverse effect on our business, our brand, and our results of operations.

We have invested and will continue to invest in our brand. We believe that maintaining and enhancing our brand identity is critical to our relationships with existing partners and customers, and to our ability to attract new partners and customers. Our ability to compete for and maintain partnerships relies to a large extent on our partners and customers’ trust in our business and the value of our brand. The failure or perceived failure to maintain our brand could adversely affect our brand value, financial condition and results of operations. Negative publicity can adversely affect our reputation and damage our brand, and may arise from many sources, including actual or alleged misconduct, errors or improper business practices by employees, employee claims of discrimination or harassment, product failures, existing or future litigation or regulatory actions, inadequate protection of customer information, data breaches, matters affecting our financial reporting or compliance with SEC and exchange listing requirements, and media coverage, whether accurate or not. Negative publicity or allegations of unfavorable business practices, poor governance, or workplace misconduct can be rapidly and widely shared over social or traditional media or other means, and could reduce demand for our products, undermine the loyalty of our customers and impact our partnerships, reduce our ability to recruit and retain employees, or lead to greater regulatory scrutiny of our operations. In addition, we and our officers, directors, and employees may be, named or otherwise involved in litigation or claims, including employment-related claims such as workplace discrimination or harassment, which could result in negative publicity or adversely impact our business, even if we are ultimately successful in defending against such claims.

Risks Relating to Being a Public Company

Our quarterly results and key metrics are likely to fluctuate significantly and may not fully reflect the underlying performance of our business.

Our quarterly results of operations and key metrics may vary significantly in the future, given our long sales cycles, and period-to-period comparisons of our results of operations and key metrics may not be meaningful. Accordingly, the results of any one quarter should not be relied upon as an indication of future performance. Our quarterly results of operations and key metrics may fluctuate as a result of a variety of factors, many of which are outside of our control, and as a result, may not fully reflect the underlying performance of our business. Fluctuation in quarterly results may negatively impact the value of our securities. Factors that may cause fluctuations in our quarterly results of operations and key metrics include, without limitation, those listed elsewhere in this Annual Report on Form 10-K and:

We will incur increased costs as a result of operating as a public company, and our management is required to devote substantial time to compliance with our public company responsibilities and corporate governance practices.

We will incur significant legal, accounting, and other expenses that we did not incur as a private company, which we expect will increase further after we are no longer an “emerging growth company.” The Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act, the listing requirements of NYSE American and other applicable securities rules and regulations impose various requirements on public companies. Our management and other personnel will be required to devote a substantial amount of time to compliance with these requirements. A number of those requirements will require us to carry out activities we have not done previously. For example, we may need to create new board committees and adopt new internal controls and disclosure controls and procedures. It may also be more expensive to obtain director and officer liability insurance. Risks associated with our status as a public company may make it more difficult to attract and retain qualified persons to serve on our board of directors or as executive officers. The additional reporting and other obligations imposed by these rules and regulations, including our reporting requirements under the Exchange Act, will increase legal and financial compliance costs and the costs of related legal, accounting and administrative activities. These increased costs will require us to divert a significant amount of money that could otherwise be used to expand the business and achieve strategic objectives. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase costs.

In addition, failure to comply with any laws or regulations applicable to us as a public company may result in legal proceedings or regulatory investigations, and may cause reputational damage. The occurrence of any of the foregoing could harm our business, financial condition, and results of operations.

We are an “emerging growth company,” and our election to comply with the reduced disclosure requirements as a public company may make our Common Stock less attractive to investors.

For so long as we remain an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”), we may take advantage of certain exemptions from various requirements that are applicable to public companies that are not “emerging growth companies,” including not being required to comply with the independent auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, being required to provide fewer years of audited financial statements, and exemptions from the requirements of holding a non-binding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved.

We may lose our emerging growth company status and become subject to the SEC’s internal control over financial reporting management and auditor attestation requirements. If we are unable to certify the effectiveness of our internal controls, or if our internal controls have a material weakness, we could be subject to regulatory scrutiny and a loss of confidence by stockholders, which could harm our business and adversely affect the market price of our Common Stock. We will cease to be an “emerging growth company” upon the earliest to occur of: (i) the last day of the fiscal year in which we have more than $1.235 billion in annual revenue; (ii) the date we qualify as a large accelerated filer, with at least $700 million of equity securities held by non-affiliates; (iii) the date on which we have, in any three year period, issued more than $1.0 billion in non-convertible debt securities; and (iv) December 31, 2025 (the last day of the fiscal year following the fifth anniversary of our IPO).

As an emerging growth company, we may choose to take advantage of some but not all of these reduced reporting burdens. Accordingly, the information we provide to our stockholders may be different than the information you receive from other public companies in which you hold stock. In addition, the JOBS Act also provides that an “emerging growth company” can take advantage of an extended transition period for complying with new or revised accounting standards. We have elected to take advantage of this extended transition period under the JOBS Act. As a result, our operating results and financial statements may not be comparable to the operating results and financial statements of other companies who have adopted the new or revised accounting standards. It is possible that some investors will find our Common Stock less attractive as a result, which may result in a less active trading market for our Common Stock and higher volatility in our stock price.

If we fail to maintain an effective system of disclosure controls and internal control over financial reporting, our ability to produce timely and accurate financial statements or comply with applicable regulations could be impaired.

We are subject to the reporting requirements of the Exchange Act, the Sarbanes-Oxley Act and the rules and regulations of NYSE American’s listing standards. We expect that the requirements of these rules and regulations will continue to increase our legal, accounting, and financial compliance costs, make some activities more difficult, time-consuming, and costly and place significant strain on our personnel, systems, and resources.

The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure controls and procedures and internal control over financial reporting. We are continuing to develop and refine our disclosure controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we will file with the SEC is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms and that information required to be disclosed in reports under the Exchange Act is accumulated and communicated to our principal executive and financial officers. We are also continuing to improve our internal control over financial reporting, which includes hiring additional accounting and financial personnel to implement such processes and controls. In order to maintain and improve the effectiveness of our disclosure controls and procedures and internal control over financial reporting, we have expended, and anticipate that we will continue to expend, significant resources, including accounting-related costs and significant management oversight. If any of these new or improved controls and systems do not perform as expected, we may experience material weaknesses in our controls.

Our current controls and any new controls that we develop may become inadequate because of changes in conditions in our business. Further, weaknesses in our disclosure controls and internal control over financial reporting may be discovered in the future.

If other material weaknesses or control deficiencies occur in the future, we may be unable to report our financial results accurately on a timely basis, which could cause our reported financial results to be materially misstated and result in the loss of investor confidence and cause the market price of our securities to decline.

We are required, pursuant to Section 404 of the Sarbanes-Oxley Act, to annually furnish a report by management on, among other things, the effectiveness of internal control over financial reporting. This assessment needs to include disclosure of any material weaknesses identified by management in its internal control over financial reporting. Our independent registered public accounting firm may be required to attest to the effectiveness of our internal control over financial reporting depending on our reporting status. We are required to disclose changes made in our internal control and procedures on a quarterly basis. To continue to comply with the requirements of being a public company, we may need to undertake various actions, such as implementing new internal controls and procedures and hiring accounting or internal audit staff. In addition, if we are unable to continue to meet these requirements, we may not be able to remain listed on NYSE American.

Changes in accounting principles may cause previously unanticipated fluctuations in our financial results, and the implementation of such changes may impact our ability to meet our financial reporting obligations.

We prepare our financial statements in accordance with generally accepted accounting principles ("GAAP") in the United States, which are subject to interpretation or changes by the Financial Accounting Standards Board, the SEC, and other various bodies formed to promulgate and interpret appropriate accounting principles. New accounting pronouncements and changes in accounting principles have occurred in the

past and are expected to occur in the future which may have a significant effect on our financial results. Furthermore, any difficulties in implementation of changes in accounting principles, including the ability to modify our accounting systems, could cause us to fail to meet our financial reporting obligations, which could result in regulatory discipline and harm investors’ confidence in us.

Our management has limited experience in operating a public company.

Our executive officers have limited experience in the management of a publicly traded company. Their limited experience in dealing with the increasingly complex laws pertaining to public companies could be a significant disadvantage in that it is likely that an increasing amount of their time may be devoted to these activities, which will result in less time being devoted to revenue producing activities and the management and growth of our business, adversely affecting our ability to attract or take advantage of business opportunities. Our management team may not be successful or effective in managing a public company that will be subject to significant regulatory oversight and reporting obligations under federal securities laws. We may not have adequate personnel with the appropriate level of knowledge, experience, and training in the accounting policies, practices, or internal controls over financial reporting required of public companies in the United States. The development and implementation of the standards and controls necessary for us to achieve the level of accounting standards required of a public company in the United States may require costs greater than expected. It is possible that we will be required to expand our employee base and hire additional employees to support our operations as a public company, which will increase our operating costs in future periods.

The redemption of our Preferred Stock may require a significant amount of cash and may result in adverse tax consequences.

Pursuant to the Certificate of Designations, on January 31, 2025, which is the two-year anniversary of the Preferred Stock Issuance, (i) if the Conversion Price (as defined in the Certificate of Designations) is equal to or less than the volume-weighted average price (“VWAP”) of Common Stock, then we will convert all outstanding shares of our Preferred Stock into shares of Common Stock at the Conversion Price and (ii) if the Conversion Price exceeds the VWAP of Common Stock, then we will be obligated to redeem all outstanding shares of Preferred Stock for $10.00 in cash. In connection with any such redemption, we may also be required, pursuant to the IRA, to pay an excise tax of 1% on the fair market value of any Preferred Stock redeemed. The redemption of the Preferred Stock and the payment of any excise tax could adversely affect the Company’s business, financial position and results of operations. In the event our assets are not sufficient to meet our redemption obligations, this could have a significant adverse effect on our reputation, business, financial condition, growth and ability to accomplish our strategic objectives.

Risks Relating to Ownership of our Securities

Our Common Stock is subordinated to our Preferred Stock.

In connection with the Closing, the Company declared an issuance of shares of Preferred Stock to our holders of record of Common Stock as of the close of business on the Closing Date (other than (a) stockholders of Legacy Nuburu who waived such stockholders’ entire right, title and interest in, to or under, any participation in the Preferred Stock Issuance (provided that such waiver did not apply with respect to shares of Common Stock received as a result of the conversion of any Company Note) and (b) the Sponsor, which waived, for no consideration, its right, title and interest in, to or under, a portion of the Preferred Stock Issuance, as further described in the Sponsor Support Agreement), with one share of Preferred Stock being issued in respect of each such share of Common Stock (the "Preferred Stock Issuance"). Such Preferred Stock is convertible into shares of Common Stock at any time at the holder’s option, and in certain circumstances at the Company’s option, subject to the conversion procedures and at the conversion price described in the Certificate of Designations. As described in the Certificate of Designations, shares of Preferred Stock rank senior to shares of Common Stock, with respect to rights on the distribution of assets in any voluntary or involuntary liquidation, dissolutions or winding up of the affairs of the Company.

Shares of our Preferred Stock may be subordinate to any senior preferred stock we may issue and to any future indebtedness.

We may, subject to approval by the majority of the holders of the shares of our Preferred Stock, issue equity or debt securities that rank senior or pari passu to the rights of our Preferred Stock. If we were to issue any such equity or debt securities, the shares of our Preferred Stock may rank junior to such securities with respect to dividend rights and rights on the distribution of assets on any voluntary or involuntary liquidation, dissolution or winding up of the affairs of the company, as well as to all creditor claims and other non-equity claims against us and our assets available to satisfy claims on it, including claims in a bankruptcy or similar proceeding.

At the two-year anniversary of the Preferred Stock Issuance, we will be obligated to redeem shares of our Preferred Stock for cash. There can be no guarantee that we will have funds available to make this redemption.

Pursuant to the Certificate of Designations, on January 31, 2025, the two-year anniversary of the Preferred Stock Issuance, (i) if the Conversion Price (as defined in the Certificate of Designations) is equal to or less than the volume-weighted average price (“VWAP”) of our Common Stock, then we will convert all outstanding shares of our Preferred stock into shares of Common Stock at the Conversion Price and (ii) if the Conversion Price exceeds the VWAP of Common Stock, then we will be obligated to redeem all outstanding shares of Preferred Stock for $10.00 in cash. In addition, upon any conversion at any time that would result in the holders beneficially owning greater than 9.99% of our voting stock outstanding as of the conversion date or any individual holder beneficially owning Common Stock in excess of the maximum number of shares of Common Stock that could be issued to the holder without triggering a change of control under the applicable stock exchange listing rules, the excess, if any, of the conversion consideration otherwise payable upon such conversion shall also be paid in cash, based on an amount per share of Common Stock equal to the last reported price per share of the Common Stock on the trading day immediately preceding the conversion date. We intend to satisfy these obligations through legally available funds, through proceeds from the potential issuance of shares to Lincoln Park, pursuant to the Lincoln Park Purchase Agreement, or otherwise available for use following consummation of the Business Combination. However, there can be no guarantee that we will have sufficient funds available to meet these obligations. In addition to being required to pay such amounts as owing pursuant to these obligations, we may also be required, pursuant to the IRA, to pay an excise tax of 1% on the fair market value of any Preferred Stock redeemed. The redemption of the Preferred Stock and the payment of any

excise tax could adversely affect our business, financial position, and results of operations, and in the event our assets are not sufficient to meet our redemption obligations, the amounts distributed to such holders would be paid out on a pro rata basis.

NYSE American may delist the Company’s securities from trading on its exchange, which could limit investors’ ability to make transactions in its securities and subject the Company to additional trading restrictions.

The Company’s Common Stock is publicly traded on the NYSE American under the symbol “BURU”. On December 28, 2023, the Company received notice (the "Notice") from the NYSE American indicating that the Company is not in compliance with the continued listing standard set forth in Section 1003(f)(v) of the NYSE American Company Guide (the “Company Guide”) because the shares of the Company’s Common Stock have been selling for a low price per share for a substantial period of time. The Notice had no immediate effect on the listing or trading of the Company’s securities and the Company’s Common Stock will continue to trade on the NYSE American under the symbol “BURU” with the designation of “.BC” to indicate that the Company is not in compliance with the NYSE American’s continued listing standards. Additionally, the Notice does not result in the immediate delisting of the Company’s securities from the NYSE American.

Pursuant to Section 1003(f)(v) of the Company Guide, the Company’s continued listing is predicated on it demonstrating sustained price improvement by no later than June 28, 2024. The Notice further stated that, as a result of the foregoing, the Company has become subject to the procedures and requirements of Section 1009 of the Company Guide, which could, among other things, result in the initiation of delisting proceedings, unless the Company cures the deficiency in a timely manner. The Company intends to monitor the stock price and consider available options to regain compliance by June 28, 2024. On February 22, 2024, the Company's stockholders approved a proposal authorizing the Company's Board of Directors to effect a reverse stock split within a range of 1 to 30 to 1 to 75.

Additionally, on December 12, 2023, the NYSE American notified the Company, and publicly announced, that the NYSE American had determined to (a) commence proceedings to delist the Company's Public Warrants, each whole Public Warrant exercisable to purchase one share of the Company's Common Stock at a price of $11.50 per share, and listed to trade on the NYSE under the symbol "BURU WS", and (b) immediately suspend trading in the Warrants due to "abnormally low" trading price levels.

In order to continue listing its securities on the NYSE American, the Company is required to maintain certain financial, distribution and stock price levels. We cannot assure you that the Company will be able to continue to meet those listing requirements or come back into compliance with those listing requirements.

If the NYSE American delists the Company’s Common Stock from trading on its exchange and the Company is not able to list its securities on another national securities exchange, we expect our securities could be quoted on an over-the-counter market. If this were to occur, we could face significant material adverse consequences, including:

The National Securities Markets Improvement Act of 1996, which is a federal statute, prevents or preempts the states from regulating the sale of certain securities, which are referred to as “covered securities.” Since the Company’s Common Stock is listed on NYSE American, it is a covered security. Although the states are preempted from regulating the sale of its securities, the federal statute does allow the states to investigate companies if there is a suspicion of fraud, and, if there is a finding of fraudulent activity, then the states can regulate or bar the sale of covered securities in a particular case. Further, if the Company was no longer listed on a securities exchange, its securities would not be covered securities and it would be subject to regulation in each state in which it offers its securities.

If our Common Stock is delisted from trading, the ability of holders of Preferred Stock to transfer or sell their shares of our Preferred Stock may be limited and the market value of our Preferred Stock will likely be materially adversely affected.

The Preferred Stock does not contain provisions that are intended to protect the holders of our Preferred Stock if our Common Stock is delisted from trading on the NYSE American. Accordingly, if our Common Stock is delisted from trading on NYSE American and we are unable to have our Common Stock listed on another securities exchange, the ability of holders of our Preferred Stock to transfer or sell their shares may be limited and the market value of our Preferred Stock will likely be materially adversely affected.

The Company’s stock price may change significantly and you could lose all or part of your investment as a result.

The trading price of the Common Stock is likely to be volatile. The stock market recently has experienced extreme volatility. This volatility often has been unrelated or disproportionate to the operating performance of particular companies. You may not be able to resell your shares at an attractive price due to a number of factors such as those listed above and the following, to the extent not already stated:

These broad market and industry fluctuations may adversely affect the market price of Common Stock, regardless of the Company’s actual operating performance. In addition, price volatility may be greater if the public float and trading volume of Common Stock is low.

In the past, following periods of market volatility, stockholders have instituted securities class action litigation. If the Company was involved in securities litigation, it could have a substantial cost and divert resources and the attention of executive management from the Company’s business regardless of the outcome of such litigation.

There is no public market for our Preferred Stock.

There is no established public trading market for our Preferred Stock, and we do not expect a market to develop. In addition, we do not intend to apply to list our Preferred Stock on any securities exchange or nationally recognized trading system, including the NYSE American, NYSE or Nasdaq. Without an active market, the liquidity of our Preferred Stock will be limited.

Because there are no current plans to pay cash dividends on our Common Stock or Preferred Stock for the foreseeable future, you may not receive any return on investment unless you sell your shares for a price greater than that which you originally paid.

We intend to retain future earnings, if any, for future operations, expansion and debt repayment (if any) and there are no current plans to pay any cash dividends for the foreseeable future. The declaration, amount, and payment of any future dividends on shares of our Common Stock or our Preferred Stock will be at the sole discretion of our board of directors. Our board of directors may take into account general and economic conditions, our financial condition, and results of operations, our available cash and current and anticipated cash needs, capital requirements, contractual, legal, tax, and regulatory restrictions, implications on the payment of dividends by us to our stockholders and us, and such other factors as our board of directors may deem relevant. In addition, our ability to pay dividends may be limited by covenants of any future indebtedness we may incur. As a result, you may not receive any return on an investment in our Common Stock unless you sell shares for a price greater than that which you originally paid.

If securities analysts do not publish research or reports about the Company’s business or if they downgrade the Company’s stock or the Company’s industry, the Company’s stock price and trading volume could decline.

The trading market for Common Stock will rely in part on the research and reports that industry or financial analysts publish about the Company or its business. The Company will not control these analysts. In addition, some financial analysts may have limited expertise with Nuburu’s model and operations. Furthermore, if one or more of the analysts who do cover the Company downgrade its stock or industry, or the stock of any of its competitors, or publish inaccurate or unfavorable research about its business, the price of the Company’s stock could decline. If one or more of these analysts ceases coverage of the Company or fails to publish reports on it regularly, the Company could lose visibility in the market, which in turn could cause its stock price or trading volume to decline.

Future sales of substantial amounts of our Common Stock in the public markets, or the perception that such sales could occur, could cause the market price of our Common Stock to drop significantly, even if our business is doing well, and certain selling securityholders still may receive significant proceeds.

The sale of shares of our Common Stock in the public market, or the perception that such sales could occur, could harm the prevailing market price of our Common Stock. These sales, or the possibility that these sales may occur, also might make it more difficult for the Company to sell equity securities in the future at a time and at a price that it deems appropriate.

On February 7, 2023, we filed a registration statement on Form S-1 (File No. 333-269610) (the “Resale S-1”), pursuant to which the selling securityholders named therein (the “Selling Securityholders”) can sell up to 36,629,724 shares of Common Stock and up to 2,235,279 shares of Preferred Stock. Certain of these shares of Common Stock were purchased at prices that were significantly below the current trading price of our Common Stock and the sale of such shares could result in the Selling Securityholder realizing a significant gain.

Sales of our Common Stock following the expiration of applicable lock-up restrictions or pursuant to the exercise of registration rights may make it more difficult for us to sell equity securities in the future at a time and at a price that we deem appropriate. These sales could also cause the market price of our Common Stock to decline if such equity holders sell or are perceived by the market as intending to sell any such securities, and make it more difficult for you to sell your shares of Common Stock at a time and price that you deem appropriate.

In addition, we have reserved a total of up to 8,327,424 shares of our Common Stock for future issuance under the Nuburu, Inc. 2022 Equity Incentive Plan (the "Equity Incentive Plan") and the Nuburu, Inc. 2022 Employee Stock Purchase (the "ESPP"), which will become eligible for sale in the public market once those shares are issued, subject to provisions relating to various vesting agreements, lock-up agreements and, in some cases, limitations on volume and manner of sale applicable to affiliates under Rule 144, as applicable. The Company intends to file a registration statement on Form S-8 under the Securities Act to register shares of Common Stock or securities convertible into or exchangeable for shares of Common Stock issued pursuant to our equity plans. Such registration statement on Form S-8 will be automatically effective upon filing. Accordingly, shares registered under such registration statement will be available for sale in the open market, subject to the provisions relating to various vesting agreements, lock-up agreements and, in some cases, limitations on volume and manner of sale applicable to affiliates under Rule 144, as applicable.

On March 31, 2023, we filed a registration statement on Form S-1 (File No. 333-271046) (the “Lincoln Park S-1”), pursuant to which permits the offer and resale of up to 15,600,000 shares of the Company's Common Stock to Lincoln Park. If and when the Company does issue Common Stock to Lincoln Park, Lincoln Park may resell all, some or none of such shares at any time or from time to time in its discretion, subject to compliance with applicable securities laws and the Lincoln Park Purchase Agreement. Therefore, issuances to Lincoln Park by the Company could result in substantial dilution to the interests of other holders of Common Stock. Additionally, the issuance of a substantial number of Common Stock to Lincoln Park, or the anticipation of such issuances, could make it more difficult for the Company to sell equity or equity-related securities in the future at a time and at prices that it might otherwise wish to effect such sales.

In the future, the Company may also issue its securities in connection with investments or acquisitions. The amount of shares of Common Stock issued in connection with an investment or acquisition could constitute a material portion of the Company’s then-outstanding shares of Common Stock. Any issuance of additional securities in connection with investments or acquisitions may result in additional dilution to the Company’s stockholders.

Anti-takeover provisions in our Governing Documents could delay or prevent a change of control.

Certain provisions of our Governing Documents may have an anti-takeover effect and may delay, defer or prevent a merger, acquisition, tender offer, takeover attempt or other change of control transaction that a stockholder might consider in its best interest, including those attempts that might result in a premium over the market price for the shares held by the Company’s stockholders.

These provisions, among other things:

As a Delaware corporation, the Company will be subject to the anti-takeover provisions of Section 203 of the DGCL, which prohibits a Delaware corporation from engaging in a business combination specified in the statute with an interested stockholder (as defined in the statute) for a period of three (3) years after the date of the transaction in which the person first becomes an interested stockholder, unless the business combination is approved in advance by a majority of the independent directors or by the holders of at least two-thirds of the outstanding disinterested shares. The application of Section 203 of the DGCL could also have the effect of delaying or preventing a change of control of the Company.

These anti-takeover provisions could make it more difficult for a third-party to acquire the Company, even if the third party’s offer may be considered beneficial by many of the Company’s stockholders. As a result, the Company’s stockholders may be limited in their ability to obtain a premium for their shares.

These provisions could also discourage proxy contests and make it more difficult for you and other stockholders to elect directors of your choosing and to cause the Company to take other corporate actions you desire.

Holders of our Preferred Stock have extremely limited voting rights.

Except for certain consent rights on matters set forth in the section entitled “Preferred Stock — Series A Preferred Stock — Voting Rights” in Exhibit 4.5 to this Annual Report on Form 10-K, the holders of our Preferred Stock will not be entitled to vote at or receive notice of any meeting of stockholders.

The Company’s stockholders will experience dilution as a result of the issuance of Common Stock (i) to Lincoln Park pursuant to the Lincoln Park Purchase Agreement, (ii) under the Equity Incentive Plan, (iii) under the ESPP, (iv) pursuant to the exercise of outstanding options, (v) to holders of Preferred Stock upon the conversion of their shares of Preferred Stock, (vi) pursuant to the future exercise of Public Warrants or private warrants issued in 2023, or (vii) upon the conversion of the Senior Convertible Notes issued in 2023. Having a minority share position may reduce the influence that our current stockholders have on the management of the Company.

Upon satisfaction of certain conditions, the Company may also direct Lincoln Park to purchase up to an aggregate of $100,000,000 of Common Stock. Holders of Common Stock will experience dilution in connection with any issuances of Common Stock under the Lincoln Park Purchase Agreement.

In addition, certain of Nuburu’s current and former employees, directors, and consultants hold outstanding options, and certain of Nuburu’s current and future employees, directors and consultants are expected to be granted equity awards and purchase rights under the Equity Incentive Plan and the ESPP, as applicable. Holders of Common Stock will experience additional dilution when those equity awards and purchase rights become vested and settled or exercisable, as applicable, for shares of Common Stock. The Preferred Stock may be converted into shares of Common Stock at the election of the stockholder or the Company, subject to certain conditions set forth in the Certificate of Designations (see the section entitled “Preferred Stock” in Exhibit 4.5 to this Annual Report on Form 10-K). If shares of Preferred Stock are converted into shares of Common Stock, holders of Common Stock will incur immediate dilution.

Common Stock ownership may also be substantially diluted by the exercise of Public Warrants or private warrants issued with the Senior Convertible Notes or the Junior Notes, or the conversion of the Senior Convertible Notes (refer to Note 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” for more information on these notes and warrants).

The issuance of additional Common Stock will significantly dilute the equity interests of existing holders of the Company securities and may adversely affect prevailing market prices for our Common Stock or Public Warrants. Such dilution may also reduce the influence that you may have on the management of the Company through the matters that are presented for voting to the Company’s stockholders.

The Company may amend the terms of the Public Warrants in a manner that may be adverse to holders of Public Warrants with the approval by the holders of at least 65% of the then outstanding Public Warrants. As a result, the exercise price of the Public Warrants could be increased, the exercise period could be shortened and the number of shares of Common Stock purchasable upon exercise of a Public Warrant could be decreased, all without your approval.

The Public Warrants were issued in registered form under the Public Warrant Agreement. The Public Warrant Agreement provides that the terms of the Public Warrants may be amended without the consent of any holder to cure any ambiguity or correct any defective provision, but requires the approval by the holders of at least 65% of the then outstanding Public Warrants to make any change that adversely affects the interests of the registered holders of the Public Warrants. Accordingly, the Company may amend the terms of the Public Warrants in a manner adverse to a holder if holders of at least 65% of the then outstanding Public Warrants approve of such amendment. Although the Company’s ability to amend the terms of the Public Warrants with the consent of at least 65% of the then outstanding warrants is broad, examples of such amendments could be amendments to, among other things, increase the exercise price of the warrants, convert the warrants into cash or stock, shorten the exercise period or decrease the number of shares of Common Stock purchasable upon exercise of a warrant.

The Company may redeem your unexpired Public Warrants prior to their exercise at a time that is disadvantageous to you, thereby making your Public Warrants worthless.

The Company has the ability to redeem outstanding Public Warrants at any time after they become exercisable and prior to their expiration, at a price of $0.01 per warrant, provided that the last reported sales price of Common Stock equals or exceeds $18.00 per share (as adjusted for stock splits, stock dividends, reorganizations, recapitalizations and the like) for any twenty (20) trading days within a thirty (30) trading-day period commencing once the Public Warrants become exercisable and ending on the third trading day prior to the date on which the Company gives proper notice of such redemption and provided certain other conditions are met. Shares of the Common Stock have never traded above $18.00 per share. If and when the Public Warrants become redeemable by the Company, the Company may not exercise its redemption right

if the issuance of shares of common stock upon exercise of the Public Warrants is not exempt from registration or qualification under applicable state blue sky laws or it is unable to effect such registration or qualification.

The Company will use its best efforts to register or qualify such shares of common stock under the blue sky laws of the state of residence in those states in which the Public Warrants were offered. Redemption of the outstanding Public Warrants could force you (i) to exercise your Public Warrants and pay the exercise price therefor at a time when it may be disadvantageous for you to do so, (ii) to sell your Public Warrants at the then-current market price when you might otherwise wish to hold your Public Warrants or (iii) to accept the nominal redemption price which, at the time the outstanding Public Warrants are called for redemption, is likely to be substantially less than the market value of your Public Warrants.

In addition, the Company may redeem outstanding Public Warrants after they become exercisable for $0.10 per warrant upon a minimum of 30 days’ prior written notice of redemption provided that holders will be able to exercise their Public Warrants prior to redemption for a number of Common Stock determined based on the redemption date and the fair market value of the Common Stock. The value received upon exercise of the Public Warrants (i) may be less than the value the holders would have received if they had exercised their Public Warrants at a later time where the underlying share price is higher and (ii) may not compensate the holders for the value of the Public Warrants, including because the number of shares of common stock received is capped at 0.361 shares of Common Stock per warrant (subject to adjustment) irrespective of the remaining life of the Public Warrants.

We have no obligation to notify holders of the Public Warrants that they have become eligible for redemption. However, pursuant to the Public Warrant Agreement, in the event we decide to redeem the warrants, we are required to mail notice of such redemption to the registered Public Warrant holders not less than 30 days prior to the redemption date.

Warrants will become exercisable for our Common Stock and our Preferred Stock will be convertible into Common Stock, each of which would increase the number of shares eligible for future resale in the public market and result in dilution to our stockholders.

Outstanding warrants to purchase an aggregate of 35,408,430 shares of our Common Stock are exercisable with thirty (30) days after December 31, 2023. Additionally, our Preferred Stock is convertible into shares of our Common Stock at any time at the holder’s option, and in certain circumstances at our option, subject to the conversion procedures and at the conversion price described in the Certificate of Designations (for more on information on the Preferred Stock, see the section entitled “Preferred Stock” in Exhibit 4.5 to this Annual Report on Form 10-K).

To the extent such warrants are exercised or such shares of our Preferred Stock are converted, additional shares of Common Stock will be issued, which will result in dilution to our then current holders of our Common Stock and increase the number of shares eligible for resale in the public market. Sales of substantial numbers of such shares in the public market could adversely affect the market price of our Common Stock.

The future exercise of registration rights may adversely affect the market price of Common Stock.

Certain of our stockholders have registration rights for restricted securities which provide for customary “demand” and “piggyback” registration rights for certain stockholders. In addition, shares of Common Stock acquired by Lincoln Park pursuant to the Lincoln Park Purchase Agreement will be afforded certain registration rights pursuant to the Lincoln Park Registration Rights Agreement. Sales of a substantial number of shares of Common Stock pursuant to these resale registration statements in the public market could occur at any time the registration statements remain effective. In addition, certain registration rights holders can request underwritten offerings to sell their securities. These sales, or the perception in the market that the holders of a large number of shares of Common Stock intend to sell shares of Common Stock, could reduce the market price of Common Stock.

There is no guarantee that our Warrants will be in the money at the time they become exercisable, and they may expire worthless.

The exercise prices for our warrants vary from $0.25 to $11.50 per share of Common Stock which exceeds $0.16, the closing price of our Common Stock on the NYSE American on April 9, 2024. The likelihood that warrant holders will exercise the warrants and any cash proceeds that we would receive is dependent upon the market price of our Common Stock. There is no guarantee that the Warrants will be in the money following the time they become exercisable and prior to their expiration, and as such, the warrants may expire worthless. If the holders of our warrants do not exercise our warrants prior to their expiration, we will not receive any proceeds from the warrants.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 1C. CYBERSECURITY

We have developed and implemented a cybersecurity risk management program intended to protect the confidentiality, integrity, and availability of our critical systems and information. Our cybersecurity risk management program is aligned with the Company’s business strategy. It shares common methodologies, reporting channels, and governance processes that apply to other areas of enterprise risk, including legal, compliance, strategic, operational, and financial risk. Key elements of our cybersecurity risk management program include:

In the last three fiscal years, the Company has not experienced any material cybersecurity incidents. We describe whether and how risks from identified cybersecurity threats have or that are reasonably likely to affect our financial position, results of operations, and cash flows, under the heading “Cyber-attacks and other disruptions, security breaches, and incidents could have an adverse effect on our business, harm our reputation, and expose us to liability” included as part of our Item 1A. "Risk Factors" of this Annual Report on Form 10-K, which disclosures are incorporated by reference herein.

The Company outsources around-the-clock coverage to a third-party managed service provider who provides timely alerting and notification of potential cybersecurity issues. We continually work with third-party experts to advise on new threats and cybersecurity strategy best practices for specific capabilities.

Our Audit Committee of the Board of Directors is responsible for oversight of our risk assessment, risk management, disaster recovery procedures, and cybersecurity risks. Periodically each year, the Audit Committee receives an overview from our Chief Executive Officer of our cybersecurity threat risk management and strategy processes, including potential impact on the Company, the efforts of management to manage the risks that are identified, and our disaster recovery preparations. Members of the Board of Directors regularly engage in discussions with management on cybersecurity-related news events and discuss any updates to our cybersecurity risk management and strategy programs.

ITEM 2. PROPERTIES

Our corporate headquarters are located in Centennial, Colorado where we lease approximately 30,000 square feet of space pursuant to a lease that expires in 2025. The facility is used for applications testing, semi-automated manufacturing, research and development, and quality control. Due to the compact size of our products and production lines, we believe this office space is sufficient to meet our near-term capacity needs; however, when the lease expires, we may seek alternate facilities for our operations. We believe that suitable alternative space would be available if required in the future on commercially reasonable terms.

ITEM 3. LEGAL PROCEEDINGS

Nuburu has been and expects to continue to become involved in litigation or other legal proceedings from time to time, including the matters described below. Except as described below, Nuburu is not currently a party to any litigation or legal proceedings that, in the opinion of Nuburu’s management, are likely to have a material adverse effect on Nuburu’s business. Regardless of outcome, litigation and other legal proceedings can have an adverse impact on Nuburu because of defense and settlement costs, diversion of management resources, possible restrictions on our business as a result of settlement or adverse outcomes, and other factors.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

​PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Price and Ticker Symbol

Our Common Stock has traded on the NYSE American under the symbol “BURU” since January 31, 2023. The Public Warrants were traded on the NYSE American under the symbol "BURU WS." On December 12, 2023, the New York Stock Exchange (“NYSE”) notified the Company, and publicly announced, that the NYSE had determined to (a) commence proceedings to delist the Company’s Public Warrants, and (b) immediately suspend trading in the Public Warrants due to “abnormally low” trading price levels. As such, the Public Warrants are no longer trading on a public exchange. Prior to January 31, 2023, Tailwind's Class A Common Stock and Public Warrants were listed on the NYSE American under the symbols "TWND" and "TWND WS" respectively.

Holders

As of April 9, 2024, there were 39 holders of record of our Common Stock. The actual number of stockholders of our Common Stock is greater than this number of record holders and includes holders who are beneficial owners but whose shares of Common Stock are held in street name by banks, brokers and other nominees.

Dividends

We do not intend to declare or pay any cash dividends in the foreseeable future.

Securities Authorized for Issuance Under Equity Compensation Plans

Prior to the closing of the Business Combination, the Company did not have any securities authorized for issuance under equity incentive compensation plans. At the Special Meeting, our stockholders approved the Equity Incentive Plan and ESPP, which were adopted in connection with the closing of the Business Combination. The Nuburu, Inc. 2015 Equity Incentive Plan (the “2015 Plan”) of Legacy Nuburu was terminated as of immediately prior to the closing of the Business Combination; however, the 2015 Plan continues to govern the terms and conditions of the outstanding awards previously granted thereunder.

Performance Graph

Not applicable.

Recent Sales of Unregistered Securities; Use of Proceeds from Registered Offerings

June 2023 Issuance. On June 16, 2023, the Company entered into a Note and Warrant Purchase Agreement (as amended, the “June 2023 Purchase Agreement”) with certain investors (each, an “Investor”), including existing investors, for the sale of (i) convertible promissory notes (“Senior Convertible Notes”) in the aggregate principal amount of $1.3 million, and (ii) warrants to purchase up to 1,889,535 shares of the Company’s Common Stock, par value $0.0001 per share (the sale of the Senior Convertible Notes and the warrants together, the “Private Placement”).

The Senior Convertible Notes are senior, unsecured obligations of the Company and bear interest at the rate of seven percent per year and are payable on the earlier of June 23, 2026 or the occurrence of an Event of Default, as defined in the Senior Convertible Notes. The Senior Convertible Notes may be converted at any time following June 23, 2023 prior to the payment in full of the principal amount of the Senior Convertible Notes at the Investor’s option. In the event of the Sale of the Company (as defined in the Senior Convertible Notes), the outstanding principal amount of each Convertible Note, plus all accrued and unpaid interest not otherwise converted into equity securities pursuant to the terms of the Senior Convertible Notes, shall (i) if the Investor so elects, be converted into equity securities pursuant to the terms of the Senior Convertible Notes (the “Conversion Shares”) at a price equal to $0.688 (subject to appropriate adjustment from time to time for any stock dividend, stock split, combination of shares, reorganization, recapitalization, reclassification or other similar event) (the “Conversion Price”), or (ii) be due and payable immediately prior to the closing of such Sale of the Company, together with a premium equal to 150% of the principal amount to be prepaid. Subsequent to the effectiveness of a registration statement registering the Registrable Securities (as defined below), the Company may elect to pay interest in kind through the issuance of shares of Common Stock at the Conversion Price, in lieu of payments in cash (the “Interest Shares”).

The warrants issued by the Company to the Investors pursuant to the June 2023 Purchase Agreement entitle the relevant Investor to purchase that number of fully paid and nonassessable shares of Common Stock determined by dividing the principal amount of each Convertible Note by the Conversion Price. The warrants have an exercise price equal to $1.03, which represents a 50% premium over the Conversion Price, and expire on June 23, 2028.

On June 16, 2023, the Company and the Investors also entered into a Registration Rights and Lock-Up Agreement (as amended, the “Registration Rights Agreement”), pursuant to which the Company agreed, following February 6, 2024 (the “Filing Deadline”), to use its commercially reasonable efforts to file a registration statement with the Securities and Exchange Commission for the resale of the Conversion Shares, the Warrant Shares and the Interest Shares (the “Registrable Securities”). Following the Filing Deadline, the Investors also are entitled to demand registration rights. Pursuant to the Registration Rights Agreement, the Investors agree that except for limited exceptions as provided therein, no notes, warrants, Conversion Shares, warrant shares or Interest Shares may be transferred until the earliest of the date that is one year from the anniversary of the date of the Registration Rights Agreement or the date on which the Company completes a liquidation, merger, stock exchange or other similar transaction wherein all the Company’s stockholders have the right to exchange their shares of Common Stock for cash, securities, or other property.

The June 2023 Purchase Agreement contains customary representations, warranties and covenants in connection with the transaction. The representations, warranties and covenants in the June 2023 Purchase Agreement are not intended to provide any other factual information about the Company. The representations, warranties and covenants contained in the Purchase Agreement were made only for purposes of such agreement and as of the date thereof, were solely for the benefit of the parties to such agreement, and may be subject to limitations agreed upon by the contracting parties.

The foregoing is only a brief description of the material terms of the Purchase Agreement, the Senior Convertible Notes, the warrants and the Registration Rights Agreement, does not purport to be a complete description of the rights and obligations of the parties thereunder.

The issuance of securities was exempt from registration requirements pursuant to Section 4(a)(2) of the Securities Act of 1933, as amended (“Securities Act”), as the securities were offered and sold solely to accredited investors in a private placement that did not involve any form of general solicitation.

November 2023 Issuance. On November 13, 2023, the Company entered into a Note and Warrant Purchase Agreement ("the November 2023 Purchase Agreement") with the lenders identified therein (the "Lenders") providing for a loan with an aggregate principal amount of $5.5 million (the “Loan”). The Loan includes zero-interest promissory notes issued with a 10% original issue discount, which will mature on the earlier of: (i) the Company closing a credit facility in principal amount of at least $20 million, (ii) a Sale Event (as defined in the November 2023 Purchase Agreement), or (iii) twelve months after issuance (the “Notes”).

The Notes contain customary events of default and are secured by the Company’s patent portfolio pursuant to a security agreement among the parties (the “Security Agreement”). Following acceptance by the NYSE of the Company’s supplemental listing application, the Company will also issue to the holders of Notes warrants exercisable for an amount of the Company’s common stock, par value $0.0001 per share (“Common Stock”), equal to 100% of the Note principal, which will be exercisable for $0.25 per share of Common Stock, have a 5-year term, and may be repurchased by the Company when the trading price of its Common Stock exceeds $1.50 for 20 out of any 30 consecutive trading days. If the Notes have not been repaid within six or nine months after issuance, the Notes will begin to bear interest (at the SOFR rate plus 9% and at the SOFR rate plus 12%, respectively) and an additional 25% warrant coverage will be provided at each such date, with a per share exercise price equal to 120% of the trading price of the Common Stock at the time of issuance and a redemption right in favor of the Company when the trading price of the Common Stock is greater than 200% of the applicable exercise price for 20 out of any 30 consecutive trading days. Shares of Common Stock issuable upon exercise of the warrants will be limited to an aggregate of 19.9% of the Company’s outstanding Common Stock until such time as the transaction is approved by the Company’s stockholders.

Pursuant to a registration rights agreement among the Company and the Lenders, the Company has registered the Common Stock underlying the warrants. The parties to the November Purchase Agreement also entered into an intercreditor and subordination agreement with the holders of the Company’s Senior Convertible Notes, which notes will now be secured pursuant to the Security Agreement and rank senior in priority to the Notes. The issuance of securities was exempt from registration requirements pursuant to Section 4(a)(2) of the Securities Act, as the securities were offered and sold solely to accredited investors in a private placement that did not involve any form of general solicitation.

April 2024 Issuance. On April 3, 2024, the Company entered into a Securities Purchase Agreement (the “SPA”) with certain accredited investors named therein (the “Investors”) pursuant to which the Investors agreed to purchase from the Company $3,000,000 of newly issued shares (the “Shares”) of the Company’s Common Stock, at a per Share purchase price of $0.125 per Share. Pursuant to the SPA, the Company will issue to the Investors warrants exercisable for an amount of Common Stock equal to 100% of the Shares, which will be exercisable for $0.1625 per share of Common Stock and have a 5-year term. The Investors will also have the right to nominate two out of seven directors for election to the Company’s board of directors.

Pursuant to a registration rights agreement among the Company and the Investors, the Company is required to promptly register the Shares and the Common Stock underlying the warrants.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

ITEM 6. [RESERVED]

Not applicable.

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Unless otherwise indicated, references in this section to "Nuburu," "we," "us," "our," and "the Company" refer to Nuburu, Inc. and its consolidated subsidiary, Nuburu, Subsidiary, Inc.

The following discussion and analysis of the Company’s financial condition and results of operations should be read in conjunction with our audited financial statements and the notes related thereto which are included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K. Certain information contained in the discussion and analysis set forth below includes forward-looking statements. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of many factors, including those set forth under “Special Note Regarding Forward-Looking Statements,” “Item 1A. Risk Factors” and elsewhere in this Annual Report on Form 10-K.

A comparison of the results for the years ended December 31, 2023 and 2022 is provided below. Our Annual Report on Form 10-K for the year ended December 31, 2022 includes discussion and analysis of our financial condition and results of operations for the years ended December 31, 2022 and 2021 in Part II, Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations."

Company Overview

We were originally incorporated in Delaware on July 21, 2020 under the name “Tailwind Acquisition Corp.” as a special purpose acquisition company, formed for the purpose of effecting an initial business combination with one or more target businesses. On September 9, 2020 (the “IPO Closing Date”), we consummated our IPO. On January 31, 2023, we consummated a business combination with Nuburu Subsidiary, Inc. f/k/a Nuburu, Inc. (“Legacy Nuburu”), a privately held operating company which merged into our subsidiary Compass Merger Sub, Inc. (the “Business Combination”) and changed our name to “Nuburu, Inc.,” and we became the owner, directly or indirectly, of all of the equity interests of Nuburu Subsidiary, Inc. and its subsidiaries.

Legacy Nuburu was determined to be the accounting acquirer and as such the financial statements represent a continuation of the financial statements of Legacy Nuburu. Refer to Note 3 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information.

Nuburu is a leading innovator in high-power, high-brightness blue laser technology that is focused on bringing breakthrough improvements to multiple markets, including e-mobility, healthcare, and consumer electronics via a broad range of high value applications that include welding and 3D printing. By delivering increased speed and quality, we hope to enhance productivity and cost efficiency for manufacturers in the e-mobility, consumer electronics, aerospace and defense, and 3D printing markets as well as to find additional applications currently not yet serviced by existing laser technologies.

We have invented, patented, and developed what we believe to be the next pivotal point for manufacturing technology, with the potential to revolutionize the manufacturing industry by changing how products are made. Our technology is also aligned with the need to reduce carbon generation in manufacturing. The Nuburu laser system outperforms currently available alternatives by more efficiently coupling heat into the material being processed, thereby helping to promote a more sustainable future by using less energy and, in turn, generating less carbon in the manufacturing process.

A fundamental physical characteristic is that metals absorb blue laser light better than infrared laser light. In the case of materials such as gold, copper, silver and aluminum, the advantage of blue laser light is substantial. The better absorption results in substantial improvements in the quality of the part produced, the yield of parts during production and the speed at which the part can be produced. We believe that these advantages enable efficiencies in the overall productivity of the manufacturing line and can extend the life of the products produced. We also believe that these characteristics will be advantageous to our customers, whether in upgrading existing manufacturing processes or enabling entirely new approaches to manufacturing through the use of Nuburu’s laser systems in either industrial welding or 3D printing technology applications.

Nuburu is currently shipping blue laser systems for welding applications such as batteries, large screen displays, and cell phone components. Nuburu has approximately 220 granted and pending patents and patent applications globally, which include: blue laser applications such as welding, blue laser technologies, single mode blue laser technology, blue Raman laser technologies, addressable array technologies, and 3D printing using blue lasers. Notably, Nuburu has been awarded patent protection for the use of high-power blue lasers.

Given the size, complexity, and value of our blue laser technology, our sales to date have come from long-term discussions between our management team and our current customers. Based on our experiences so far, we expect the approximate adoption timelines of our customers from first contact to first purchase order to range up to 22-24 months. Going forward, we intend to expand our marketing efforts and as we pursue a more widespread adoption of our blue laser technology.

We have developed and trained and expect to continue to develop and train third-party distributors that provide sales and customer support functions in their specific territory, including business development and sales, application and service support, and local marketing. Our distributors are, and are expected to be, an integral part of our sales and marketing strategy. The Americas region is managed from our headquarters, but we have distributor partners located in key countries worldwide to help target current and prospective customers in Asia (particularly in China, Japan, Singapore, South Korea, India, and Taiwan) and in Europe.

We generated total revenue of $2,085,532 and $1,440,428 and had net losses of $20,706,384 and $29,517,198 during the years ended December 31, 2023 and 2022, respectively.

We expect to incur significant expenses and operating losses for the foreseeable future, as we:

Accordingly, we may seek to fund our operations through public or private equity financings, debt financings, or other sources. However, we may be unable to raise additional funds or enter into such other arrangements when needed on favorable terms or at all. Our failure to raise capital or enter into such other arrangements as and when needed would have a negative impact on our financial condition.

The Business Combination

On January 31, 2023, we consummated the Business Combination. We received net proceeds from the Business Combination totaling $3,243,079, prior to deducting transaction and issuance costs. The cash resulting from the Business Combination is expected to be used toward our corporate growth strategy related to the commercialization of our blue laser systems and the scaling of our manufacturing operations to meet customer demand. The cash raised from the Business Combination is also expected to be used to fund investments in personnel and research and development, as well as provide liquidity for the funding of our ongoing operating expenses.

The Business Combination is accounted for as a reverse recapitalization for financial statement reporting purposes with Legacy Nuburu deemed to be the acquirer and Tailwind deemed to be the acquiree. Under this method of accounting, Tailwind will be treated as the acquired company for financial statement reporting purposes.

Being an SEC-registered and publicly traded company has required us to hire additional personnel and to implement procedures and processes to address public company regulatory requirements and customary practices. Compared to the operations of Legacy Nuburu, we have incurred and expect to incur additional annual expenses as a public company for, among other things, directors’ and officers’ liability insurance, director fees, and additional internal and external accounting, legal, and administrative resources, including increased personnel costs, audit, and other professional service fees.

Recent Developments

On February 22, 2024, we held a Special Meeting of Stockholders where stockholders of record as of January 22, 2024 approved proposals to authorize the Company to: (i) effect a reverse stock split of the Company's issued and outstanding Common Stock within a range from 1-for 30 to 1-for-75, with the exact ratio of the reverse stock split to be determined by the Company's board of directors, and (ii) issue up to $50.0 million of securities in one or more non-public offerings, where the maximum discount at which securities may be offered may be equivalent to a discount of up to 30% below the market price of the Company's Common Stock. As of the date of this report, we have not effected the reverse stock split, but intend to effect the split in the near future.

On April 3, 2024, we entered into a Securities Purchase Agreement (the “SPA”) with certain accredited investors named therein (the “Investors”) pursuant to which the Investors agreed to purchase from the Company $3,000,000 of newly issued shares (the “Shares”) of the Company’s Common Stock, at a per Share purchase price of $0.125 per Share. This equates to 24,000,000 shares to be issued to the investors.

Pursuant to the SPA, the Company issued to the Investors warrants exercisable for an amount of Common Stock equal to 100% of the Shares, which will be exercisable for $0.1625 per share of Common Stock and have a 5-year term. The Investors will also have the right to nominate two out of seven directors for election to the Company’s board of directors.

In addition, in the first quarter of 2024, management initiated measures designed to improve operational efficiency and reduce costs during fiscal year 2024, which included implementing temporary furloughs of employees. Management is reallocating resources and reducing operating and general administrative expenses to more properly align the Company’s costs to anticipated near-term revenue, given the time required to qualify products with certain customers and establish long-term financing to support operations.

Key Factors Affecting Our Performance

Commercial Launch of Products

In 2022 and early 2023, we began the production and shipment of our AO-650 laser. We announced the commercial launch of the first laser in the NUBURU BLTM series, the BL-250, in January 2023. We announced the commercial launch of the BL-1Kw in June 2023. We have shifted our future focus to manufacturing and shipping the BLTM series.

Adoption of our Blue Laser Technology

We believe that Nuburu blue laser technology offers a superior solution to improving a variety of aspects of welding and 3D printing, particularly in the manufacturing of batteries, consumer electronics, electric vehicles, renewable energy products, and displays. However, our financial results will depend on the degree to which potential and current customers recognize the benefits of our blue laser technology and invest in our products. The selection process for our products is lengthy, typically up to 22-24 months, and may require us to incur costs in pursuing opportunities with no assurance that our products will be selected.

Capital Equipment

Our business is expected to depend substantially on capital expenditures by end users, particularly by manufacturers using our products for materials processing, which includes general manufacturing, automotive (particularly electric vehicles), other transportation, aerospace, heavy industry, consumer, semiconductor, and electronics. Although applications within materials processing are broad, the capital equipment market in general is cyclical and historically has experienced sudden and severe downturns. For the foreseeable future, our operations will continue

to depend upon capital expenditures by end users of materials processing equipment and will be subject to the broader fluctuations of capital equipment spending.

Recent inflationary pressures are resulting in global central banks adopting less accommodating monetary policies and increasing interest rates. Higher interest rates could impact global growth and could lead to a recession that may reduce the investment in capital equipment. In addition, higher interest rates would increase the cost of equipment financed with leases or debt.

Establishing Manufacturing Capacity

Nuburu’s lasers are designed to be compatible with automated manufacturing methods. Nuburu continually improves the design of its lasers as well as the automation equipment required to manufacture these systems. We expect to work to reduce waste and limit costs while developing robust manufacturing processes with the aim of enhancing our competitive advantage in the marketplace. To do this, we are incorporating the Six Sigma Lean methodologies as well as ISO quality standards to ensure we meet customer expectations. With Six Sigma, we expect to further improve the quality of our products and decrease the variations that cause rework or defects. By incorporating the 5S pillars of the Six Sigma process into our day-to-day work life, we expect to develop a streamlined productive work environment ensuring organized and improved cycle times, with the aim of reducing the cost of goods sold. Through these tools we aim to create an environment that demands quality and performance, while reducing downtime and defects that are generated from undefined processes and underutilized talent.

We anticipate that as we ramp up our manufacturing, we will require additional engineers and production personnel to build out and then operate our manufacturing capabilities.

Research and Development Expenses

We plan to continue to invest in research and development to improve our existing components and products and develop new components, products, systems, and applications technology. We believe that these investments will sustain our position as a leader in the blue laser industry and will support the development of new products that can address new markets and growth opportunities. The amount of research and development expense we incur may vary from period to period.

Inflationary Pressure

The U.S. economy has experienced increased inflation recently, including as a result of expansive monetary policy. Our cost to manufacture our systems is heavily influenced by the cost of the key components and materials used in each system, cost of labor, as well as cost of equipment.

Components of Statements of Operations

Revenue

Revenue consists of revenue recognized from sales and installation services of high-powered lasers. We have customers in the United States, Europe, and Asia. In all sales arrangements, revenue is recognized when control of the promised goods or services is transferred to customers, in an amount that reflects the consideration the Company expects to be entitled to receive in exchange for those goods or services.

Cost of Revenue

Cost of revenue primarily consists of the cost of materials, overhead and employee compensation associated with the manufacturing of our high-powered lasers. Product cost also includes lower of cost or net realizable value inventory (“LCNRV”) adjustments if the carrying value of the inventory is greater than its net realizable value as well as adjustments for excess or obsolete inventory.

Operating Expenses

Research and Development

Research and development expenses consist primarily of compensation and related costs for personnel, including stock-based compensation, employee benefits, training, travel, third-party consulting services, laboratory supplies, and research and development equipment depreciation incurred to further our commercialization development efforts. We expense research and development costs as incurred. We anticipate research and development expenses to increase significantly as we expand our product portfolio.

Selling and Marketing

Selling and marketing expenses consist primarily of compensation and related costs for our direct sales force, sales management, and marketing and include stock-based compensation, employee benefits, and travel for selling and marketing employees as well as costs related to trade shows, marketing programs. third-party consulting expenses, and application lab depreciation expenses. We expense selling and marketing costs as incurred. We expect selling and marketing expenses to increase in future periods as we expand our sales force, marketing, and customer support organizations and increase our participation in trade shows and marketing programs.

General and Administrative

Our general and administrative expenses consist primarily of compensation and related costs for our finance, human resources, and other administrative personnel, and include stock-based compensation, employee benefits, and travel expenses. In addition, general and administrative expenses include our third-party consulting and advisory services, legal, audit, accounting services, and facilities costs. We expect our general and administrative expenses to increase for the foreseeable future as we scale headcount with the growth of our business, and as a result of operating as a public company, including compliance with the rules and regulations of the SEC, legal, audit, additional insurance expenses, investor relations activities, and other administrative and professional services.

Change in Fair Value of Convertible Notes Payable

Change in fair value of convertible notes payable relates to the Legacy Nuburu Convertible Notes accounted for at fair value during the year ended December 31, 2022 that were subsequently cancelled and converted into shares of Legacy Nuburu common stock in connection with the Business Combination. Refer to Notes 3 and 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information on the Company's Business Combination and notes payable, respectively.

Interest Income

Interest income consists primarily of interest income received on our cash and cash equivalents.

Interest Expense

Interest expense consists primarily of interest owed on our outstanding debt, as further described in Note 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K.

Other Income (Expense), Net

Other income (expense), net consists primarily of changes in the fair value of the Public Warrants and the Junior Note Warrants (as defined in Note 10 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K). The outstanding Public Warrants and Junior Note Warrants are re-measured to fair value at each balance sheet date with the corresponding gain or loss from the adjustment recorded as a component of other income (expense), net.

Results of Operations

The following table sets forth our operations for the periods presented:

Revenue. Revenue increased $645,104 during the year ended December 31, 2023 compared to the same period in 2022. This increase is primarily due to an approximate $346,000 increase in revenue from additional shipments of BLTM-250 lasers and increase in the overall price per laser system sold in 2023 compared to 2022, as well as $296,000 additional revenue from government contracts period over period.

Cost of Revenue. Cost of revenue increased $835,834 during the year ended December 31, 2023 compared to the same period in 2022. This increase is primarily due to one-time charges to increase our AO-650 inventory reserve by approximately $900,000 during 2023 as a result of the Company's transition from producing the NUBURU AO series to producing the BLTM series.

Research and Development. Research and development expenses increased $916,623 during the year ended December 31, 2023 compared to the same period in 2022. This increase is primarily due to approximately $1,600,000 of additional general research and development personnel expenses in 2023 compared to 2022, partially offset by approximately $712,000 of lower spend on the BLTM series as it transitioned to production in 2023.

Selling and Marketing. Selling and marketing expenses increased $831,546 during the year ended December 31, 2023 compared to the same period in 2022. This increase is primarily due to the increase in personnel expenses, including nearly a full year of expenses related to our new

Chief Marketing and Sales Officer, who was hired in March 2023, while our former Chief Marketing and Sales Officer had previously departed the Company on March 31, 2022.

General and Administrative. General and administrative expenses increased $5,899,032 during the year ended December 31, 2023 compared to the same period in 2022. This increase is primarily driven by increased professional fees associated with legal, compliance and accounting matters, specifically the costs associated with transitioning to being a public company.

Change in Fair Value of Convertible Notes Payable. The Company recorded a loss related to the change in fair value of its Legacy Nuburu Convertible Notes of $15,388,369 during the year ended December 31, 2022. No such loss was recorded during the year ended December 31, 2023, as the Legacy Nuburu Convertible Notes were cancelled and converted into shares of Legacy Nuburu common stock in connection with the Business Combination. Refer to Notes 3 and 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information on the Company's Business Combination and notes payable, respectively.

Interest Income. Interest income increased $73,396 during the year ended December 31, 2023 compared to the same period in 2022 due to higher interest rates earned on our cash balances.

Interest Expense. Interest expense increased $579,261 during the year ended December 31, 2023 compared to the same period in 2022 primarily due to higher debt balances between periods. Interest expense in 2023 comprised of interest accrued on the Senior Convertible Notes and the debt discount and issuance cost amortization for the Junior Notes. Interest expense in 2022 comprised of interest accrued on the Legacy Nuburu Convertible Notes. Refer to Note 8 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information on the Company's notes payable.

Other income, net. Other income, net increased $1,766,513 during the year ended December 31, 2023 compared to the same period in 2022 due to the decrease in the fair value of the Public Warrants as of December 31, 2023, as well as the decrease in fair value of the Junior Note Warrants as of December 31, 2023. Refer to Note 10 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information on these warrants.

Liquidity and Capital Resources

Overview

Liquidity describes the ability of a company to generate sufficient cash flows to meet the cash requirements of its business operations, including working capital needs, debt service, acquisitions, contractual obligations, and other commitments. As of the date of this Annual Report on Form 10-K, we have yet to generate meaningful revenue from our business operations and have funded capital expenditure and working capital requirements through debt and equity financing.

As of December 31, 2023, we had cash and cash equivalents of $2,148,700 as compared to $2,880,254 as of December 31, 2022. Our cash flows from operations are not sufficient to fund our current operating model and expansion plans. On the second anniversary of the Closing Date, the Company must also, under certain circumstances, redeem the maximum portion of the Preferred Stock as permitted by law in cash at an amount equal to the Original Issuance Price as of such date. Notwithstanding the foregoing, the Company shall not be required to redeem any shares of Preferred Stock to the extent the Company does not have legally available funds to effect such redemption.

In connection with the Business Combination, we received cash of $3,243,079, prior to deducting transaction and issuance costs, which exceeded this amount.

From inception through December 31, 2023, we have incurred operating losses and negative cash flows from operating activities. For the years ended December 31, 2023 and 2022, we have incurred net losses of $20,706,384 and $29,517,198, respectively, and we have an accumulated deficit of $97,286,789 as of December 31, 2023. We expect to continue to expand our operations, including by investing in manufacturing, sales and marketing, research and development, and infrastructure to support its growth. The Company anticipates that it will incur net losses for the foreseeable future and, even if it increases its revenue, there is no guarantee that it will ever become profitable. All of the aforementioned factors raise substantial doubt about our ability to continue as a going concern.

Until we can generate sufficient revenue to cover our operating expenses, working capital, and capital expenditures, we will rely on funds raised from the closing of the Business Combination; from the $5,500,000 Junior Notes issued in November 2023, from the $9,225,000 of Senior Convertible Notes issued in June 2023; from the $11,400,000 of Company Notes issued prior to the Closing; the $3,000,000 raised from the SPA executed in April 2024, and from the Lincoln Park Purchase Agreement pursuant to which Lincoln Park has agreed to purchase from the Company, at the sole discretion of the Company, up to $100,000,000 of Common Stock from time to time over a 48-month period, subject to a stock price floor of $1.00 per share. Refer to the consolidated financial statements in Item 8 of this Annual Report on Form 10-K for more information on the Company's various sources of financing.

We would also obtain additional funds if the holders of our Public Warrants and private warrants issued in 2023 (refer to Note 10 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data” of this Annual Report on Form 10-K for more information) were to exercise their warrants. However, the exercise price for our Public Warrants is $11.50 per share of Common Stock, $1.03 per share of Common Stock for our Senior Note Warrants, and $0.25 per share of Common Stock for our Junior Note Warrants, respectively, all of which exceed $0.16, the closing price of our Common Stock on the NYSE American on April 9, 2024. The likelihood that warrant holders will exercise the warrants and any cash proceeds that we would receive is dependent upon the market price of our Common Stock. If the market price for our Common Stock is less than the exercise price per share, we believe warrant holders will be unlikely to exercise their warrants.

The further development of our products, commencement of commercial operations and expansion of our business will require a significant amount of cash for expenditures. Our ability to successfully manage this growth will depend on many factors, including our working capital needs, the availability of equity or debt financing and, over time, our ability to generate cash flows from operations.

Given the Company’s current liquidity position, the Company will need to raise additional capital. If we raise additional funds by issuing equity securities, including pursuant to the Lincoln Park Purchase Agreement, this would result in dilution to our stockholders. If we raise additional funds by issuing any additional preferred stock, such securities may also provide for rights, preferences, or privileges senior to those of holders of Common Stock. If we raise additional funds by issuing debt securities, such debt securities would have rights, preferences and privileges senior to those of holders of Common Stock. The terms of debt securities or borrowings could impose significant restrictions on our operations. The credit market and financial services industry have in the past, and may in the future, experience periods of uncertainty that could impact the availability and cost of equity and debt financing.

Cash Flows

The following table summarizes our cash flows from operating, investing and financing activities for the periods presented.

Cash flows from operating activities

Our cash flows used in operating activities to date have been primarily comprised of costs related to research and development, selling and marketing, and other general and administrative activities. We expect our expenses related to personnel, research and development, selling and marketing, and general and administrative activities to increase as a result of operating as a public company.

Net cash used in operating activities was $17,540,163 and $10,227,730 for the years ended December 31, 2023 and 2022, respectively. The increase in net cash flows used in operating activities is primarily driven by increased operating expenses and changes in working capital, partially offset by increases in revenue.

Cash flows from investing activities

Our cash flows from investing activities have been comprised primarily of purchases of equipment and installation of improvements to our leased facilities and headquarters.

Net cash used in investing activities was $1,167,751 and $536,038 for the years ended December 31, 2023 and 2022, respectively. The increase was primarily due to increased purchases of equipment to build out our production line.

Cash flows from financing activities

We have financed our operations primarily through the sale of preferred stock, common stock, convertible notes, and promissory notes.

Net cash provided by financing activities was $17,976,360 and $7,636,447 for the years ended December 31, 2023 and 2022, respectively. The increase is comprised of proceeds received from the issuance of notes and warrants, proceeds from the issuance of Common Stock from the Lincoln Park Purchase Agreement, and the proceeds received from the Closing of the Business Combination. These combined proceeds were partially offset by payments of transaction costs associated with the Business Combination and payment of deferred financing costs.

Key Operating and Financial Metrics (Non-GAAP Results)

We regularly review several metrics, including the metrics presented in the table below, to measure our performance, identify trends affecting our business, prepare financial projections, and make strategic decisions. We believe that these key business metrics provide meaningful supplemental information for management and investors in assessing our historical and future operating performance. The calculation of the key metrics and other measures discussed below may differ from other similarly-titled metrics used by other companies.

The following tables present our key performance indicators for the years ended December 31, 2023 and 2022:

(1) EBITDA and Free cash flow are non-GAAP financial measures. See "Non-GAAP Information" below for our definitions of, and additional information about, EBITDA and Free cash flow and for a reconciliation to the most directly comparable U.S. GAAP financial measures.

Non-GAAP Information

Our consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States ("GAAP"). In addition to our results determined in accordance with GAAP, we believe the following non-GAAP measures are useful in evaluating our operational performance. We use the following non-GAAP financial information to evaluate our ongoing operations and for internal planning and forecasting purposes. We believe that non-GAAP financial information, when taken collectively and in context, may be helpful to investors in assessing our operating performance and trends and in comparing our financial measures with those of comparable companies that may present similar non-GAAP financial measures.

EBITDA and Free Cash Flow

We define “EBITDA” as income (loss), plus (minus) depreciation and amortization expenses, plus (minus) interest, plus (minus) taxes and define “Free cash flow” as net cash from (used in) operating activities less capital expenditures. EBITDA and Free cash flow are intended as supplemental measures of our performance that are neither required by, nor presented in accordance with, GAAP and these measures should not be considered a substitute for net income (loss), and net cash used in operating activities reported in accordance with GAAP. Our computation of EBITDA and Free cash flow may not be comparable to other similarly titled measures computed by other companies, because all companies may not calculate EBITDA or Free cash flow in the same fashion.

Limitations of Non-GAAP Measures

There are a number of limitations related to EBITDA, including the following:

Because of these and other limitations, EBITDA and Free cash flow should not be considered in isolation or as a substitute for performance measures calculated in accordance with GAAP. We compensate for these limitations by relying primarily on our GAAP results and using EBITDA and Free cash flow on a supplemental basis. You should review the reconciliation of our net loss to EBITDA and net loss to Free cash flow below and not rely on any single financial measure to evaluate our business.

Our presentation of EBITDA should not be construed as an inference that our future results will be unaffected by unusual or non-recurring items and our presentation of Free cash flow does not necessarily indicate whether cash flows will be sufficient to fund our cash needs.

Reconciliation

The following table reconciles our net loss (the most directly comparable GAAP measure) to EBITDA for the periods presented:

The following table reconciles our net cash used in operating activities (the most directly comparable GAAP measure to Free cash flow) to Free cash flow for the periods presented:

Off-Balance Sheet Arrangements

We have no obligations, assets or liabilities, which would be considered off-balance sheet arrangements as of December 31, 2023. We do not participate in transactions that create relationships with unconsolidated entities or financial partnerships, often referred to as variable interest entities, which would have been established for the purpose of facilitating off-balance sheet arrangements. We have not entered into any off-balance sheet financing arrangements, established any special purpose entities, guaranteed any debt or commitments of other entities, or purchased any non-financial assets.

Contractual Obligations

For our contractual obligations that are expected to have an effect on our liquidity and cash flow, refer to Notes 6, 8, and 9 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data" of this Annual Report on Form 10-K.

Critical Accounting Estimates

Our consolidated financial statements are prepared in conformity with GAAP which requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, and expenses. These estimates and assumptions are based on historical experience and on various other factors that we believe are reasonable under the circumstances. We evaluate our estimates and assumptions on an ongoing basis.

In addition to the accounting policies that are more fully described in the Notes to the Consolidated Financial Statements included in “Item 8. Financial Statements and Supplementary Data" of this Annual Report on Form 10-K, we have identified the following critical accounting estimates that require us to use judgments, often as a result of the need to make assumptions regarding matters that are inherently uncertain, and actual results could differ from these estimates. Critical accounting estimates are those that involve a significant amount of estimation uncertainty and have had or are reasonably likely to have a material impact on our financial condition and results of operations. Accordingly, a different financial presentation could result depending on the judgments, estimates or assumptions that are used. Therefore, we consider an understanding of the variability and judgment required in making these estimates to be critical in fully understanding and evaluating our reported financial results.

Revenue Recognition

Our primary business activity involves sales and installation services of high-powered lasers. We have customers in the United States, Europe, and Asia. All sales and installation services are settled in U.S. dollars.

We recognize revenue at a point in time when transferring control of lasers and over time when providing installation services. Revenues recognized over time are based on the progress towards completion of the performance obligation. The amount of revenue we record reflects the consideration we expect to be entitled to receive in exchange for these products and services. We consider customer purchaser orders to be contracts with a customer. We allocate the transaction price to each distinct product based on its relative standalone selling price.

Our standard contracts include warranty provisions that provide assurance to customers that the products will comply with agreed-upon specifications, which is standard in the industry. Product warranties accounted for in accordance with the guidelines under the Financial Accounting Standards Board's ("FASB") Accounting Standards Codification ("ASC") 460-10 — Guarantees. Therefore, losses from warranty obligations are accrued when the amount of loss can be reasonably estimated, and the information is available before the financial statements are issued or are available to be issued. Due to the assumptions inherent in the calculation of our product warranty liabilities, actual results could differ significantly from estimates.

Inventory

Inventory is stated at the lower of average cost (principally standard cost, which approximates actual cost on a first-in, first-out basis) and net realizable value. Inventory includes raw materials and components that may be specialized in nature and subject to obsolescence. On a quarterly basis, we review inventory quantities on hand in comparison to our past consumption, recent purchases, and other factors to determine what inventory quantities, if any, may not be sellable. Based on this analysis, we write down the affected inventory value for estimated excess and obsolescence charges. At the point of loss recognition, a new, lower-cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis. Due to the assumptions inherent in the calculation of our inventory reserve amounts, actual results could differ significantly from estimates.

Liability-Classified Warrants

We account for the Public Warrants and Junior Note Warrants (as defined in Note 8 of the consolidated financial statements included in Item 8 of this Annual Report on Form 10-K) in accordance with the guidance contained in FASB ASC 815-40 — Contracts on an Entity's Own Equity under which the Warrants do not meet the criteria for equity treatment and must be recorded as liabilities. Accordingly, we classify the Public Warrants and Junior Note Warrants as liabilities at their fair value and adjust the liabilities to fair value at each reporting period. This liabilities are subject to re-measurement at each balance sheet date until exercised, and any change in fair value is recognized in our consolidated statements of operations. Further, the Junior Note Warrant liability uses inputs classified as Level 3 in the fair value hierarchy, which are inputs in which little or no market data exists, or are otherwise unobservable. The determination of the fair value of the warrant liabilities may be subject to change as more current information becomes available and accordingly the actual results could differ significantly from estimates.

Equity-Classified Warrants

Warrants that meet the criteria for equity treatment are recorded at their fair value as of the issuance date. If the warrants are issued in conjunction with notes, the fair value is allocated between the notes and the warrants based on their respective relative fair values upon issuance. Fair values of warrants are estimated using the Black-Scholes option-pricing model with the following assumptions:

Stock-Based Compensation

We record stock-based compensation in accordance with FASB ASC Topic 718 — Stock Compensation ("ASC 718"). ASC 718 requires all share-based awards to employees, including grants of employee stock options, to be recognized in the consolidated financial statements based on their fair values. Under the provisions of ASC 718, we determine the appropriate fair value model to be used for valuing share-based issuances and the amortization method for recording compensation cost, which can be impacted by the following assumptions:

Lease Obligations

We account for leases in accordance with FASB ASC Topic 742 — Leases. In determining the present value of lease payments, we use the rate implicit in the lease or, when such rate is not readily available, we utilize our incremental borrowing rate based on the information available at the lease commencement date. Lease expense is recognized on a straight-line basis over the expected lease term. In determining the expected lease term, we may include options to extend or terminate the lease when it is reasonably certain that we will exercise any such option.

Income Taxes

Income taxes are accounted for in accordance with the provisions of FASB ASC Topic 740 — Taxes ("ASC 740"), which requires the recognition of deferred income taxes for differences between the basis of assets and liabilities for financial statement and income tax purposes. Income taxes are recognized for the current year and for the impact of deferred tax assets and liabilities, which represent the future tax consequences of events that have been recognized differently in the financial statements than for income tax purposes. Deferred tax assets and liabilities are determined based upon the difference between the financial statement and income tax basis of assets and liabilities, as measured by the enacted tax rates which will be in effect when these differences are expected to reverse. Deferred tax expense (credit) is the result of changes in the deferred tax assets and liabilities.

In the event that future consequences of the differences between financial reporting bases and tax bases of assets and liabilities result in a deferred tax asset, we perform an evaluation of the probability of being able to realize the future benefits indicated by such asset. A valuation allowance related to a net deferred tax asset is recorded when it is more likely than not that some portion or all of the net deferred tax asset will not be realized. We recorded a full valuation allowance as of December 31, 2023 and 2022, as it is more likely than not that we will not be able to utilize our net deferred tax assets in the foreseeable future. We maintain valuation allowances until sufficient evidence exists to support the reversal of such valuation allowances. Refer to Note 12 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data" in this Annual Report on Form 10-K for more information.

Recently Issued and Adopted Accounting Pronouncements

We review new accounting standards to determine the expected financial impact, if any, that the adoption of each new standard will have. For the recently issued and adopted accounting standards that we believe may have an impact on our consolidated financial statements, refer to Note 2 in the consolidated financial statements included in “Item 8. Financial Statements and Supplementary Data" in this Annual Report on Form 10-K.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information otherwise required under this item.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

This information appears following Item 15 of this Annual Report on Form 10-K and is included herein by reference.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

Disclosure controls are procedures that are designed with the objective of ensuring that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized, and reported within the time period specified in the SEC’s rules and forms. Disclosure controls are also designed with the objective of ensuring that such information is accumulated and communicated to our management, including the chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

As required by Rules 13a-15 and 15d-15 under the Exchange Act, we carried out an evaluation, under the supervision and with the participation of our management, including our Principal Executive Officer and Principal Financial and Accounting Officer, of the effectiveness of the design and operation of our disclosure controls and procedures, as of the end of the period covered by this Annual Report on Form 10-K.

Based on this evaluation, we concluded that during the period covered by this report, our disclosure controls and procedures were not effective as of December 31, 2023, because of a material weakness in our internal control over financial reporting described below.

Management’s Report on Internal Controls Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) and 15d-15(f) of the Exchange Act. Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a material misstatement of our consolidated financial statements would be prevented or detected. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Under the supervision and with the participation of our management, including our Principal Executive Officer and Principal Financial and Accounting Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2023 based on the framework established in “Internal Control – Integrated Framework (2013)” issued by the Committee of Sponsoring Organizations of the Treadway Commission. Our management concluded that our internal control over financial reporting was not effective as of that date due to a material weakness in our control environment around the accounting and presentation of complex financial instrument transactions that was not effectively designed or maintained. This material weakness resulted in the restatements of the Company’s financial statements as of and for the year ended December 31, 2023, the comparative period therein as of and for the year ended December 31, 2022 and for each of the quarterly periods ended March 31, 2023, June 30, 2023 and September 30, 2023. Additionally, this material weakness could result in material misstatements of the financial statements that would not be prevented or detected on a timely basis.

We plan to take steps to enhance and improve the design of our internal control over financial reporting. During the period covered by this annual report on Form 10-K, we have not been able to remediate the material weaknesses identified above. To remediate such weaknesses, we intend to implement the following changes during our fiscal year ending December 31, 2025: (i) hire additional qualified personnel to address inadequate segregation of duties and ineffective risk management; and (ii) adopt sufficient written policies and procedures for accounting and financial reporting. The remediation efforts set out in (i) and (ii) are dependent upon our receiving additional financing to cover the costs of implementing the changes required. If we are unsuccessful in securing such funds, remediation efforts may be adversely affected in a material manner.

See Note 14, “Restatement of Previously Issued Consolidated Financial Statements and Previously Issued Unaudited Interim Condensed Consolidated Financial Statements ” in Part II, “Item 8. Financial Statements and Supplementary Data” for additional information.

This Amendment No. 4 on Form 10-K/A does not include an attestation report of our independent registered public accounting firm due to our status as an emerging growth company under the JOBS Act.

Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting identified in management's evaluation pursuant to Rules 13a-15(f) or 15d-15(f) of the Exchange Act during the fourth quarter of 2023 that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting as the circumstances that led to the revision of our financial statements described in this Amendment No. 4 on Form 10-K/A had not yet been identified.

Item 9B. Other Information

None.

Item 9C. Disclosure Regarding Foreign Jurisdiction that Prevent Inspections.

Not Applicable.

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

Information About Our Board of Directors and Executive Officers

Board of Directors

The following sets forth certain information, as of April 24, 2024, about each member of our Board of Directors (the “Board”), including a discussion of their specific experience, qualifications, attributes, or skills that led to the conclusion that they should serve as directors.