Key Weighted Average TREO Concentrations: 0-100 Metres 3,577 PPM, 0-18 Metres 9,445 PPM, Including 7 Metres 18,275 PPM, 3 Metres 25,317 PPM, and 1.5 Metres 30,642 PPM

Toronto, Ontario--(Newsfile Corp. - February 8, 2024) - Appia Rare Earths & Uranium Corp. (CSE: API) (OTCQX: APAAF) (FSE: A0I0) (MUN: A0I0) (BER: A0I0)(the "Company" or "Appia") is pleased to report significant assay results from its discovery Diamond Drill Hole (DDH) PCH-F01, located within the highly prospective Target IV zone at its PCH ionic adsorption clay project in Brazil. Appia has re-assayed the entire hole PCH-F01 as part of its due diligence, and assay results from surface to 18 metres include 9,445 parts per million (ppm) Total Rare Earth Oxide (TREO), 2,786 ppm Magnet Rare Earth Oxide (MREO), 787 ppm Heavy Rare Earth Oxide (HREO), and 8,658 ppm Light Rare Earth Oxide (LREO).

DDH PCH-F01, originally drilled vertically to 100 metres depth during the vendors' exploration campaign in 2021, has been re-assayed and updated with the nomenclature DDH PCH-F01R. This hole intercepted a high-grade mineralized weathered profile to bedrock, spanning from the surface to 18 metres. The re-assaying confirmed the presence of continued high-grade mineralization throughout the intercepted hard rock zone, with the mineralization continuing until the end of drill hole at 100 metres depth.

Highlights:

• Composite results across 100 metres:
  • 3,577 ppm or 0.36% TREO including 968 ppm or 0.10% MREO, 293 ppm or 0.03% HREO, and 3,284 ppm or 0.33% LREO.
• Composite results from 0-18 metres:
  • 9,445 ppm or 0.94% TREO including 2,786 ppm or 0.28% MREO, 787 ppm or 0.08% HREO, and 8,658 ppm or 0.86% LREO.
• Composite results 0-7 metres:
  • 18,275 ppm or 1.83% TREO, 5,640 ppm or 0.56% MREO, 1,550 ppm or 0.16% HREO, and 16,725 ppm or 1.67% LREO
    • Including 3 metres at 25,317 ppm or 2.53% TREO, 8,473 ppm or 0.85% MREO, 2,102 ppm or 0.21% HREO, and 23,215 ppm or 2.32% LREO from 1.5m to 4.5m; and
    • Including 1.5 metres at 30,642 ppm or 3.06% TREO, 11,219 ppm or 1.12% MREO, 2,434 ppm or 0.24% HREO, and 28,208 ppm or 2.82% LREO from 2m to 3.5m.

Table 1 - Diamond Drill Hole PCH-F01R Composite Assay Results.

Click HERE for a complete listing of the full assay results.

"These results from DDH PCH-F01R confirm the presence of an alkaline breccia with significant concentrations of REE throughout the hard rock beneath the clay and saprolite zones," commented Stephen Burega, President. He continued, "DDH PCH-F01R is situated northeast of the previously reported PCH RC-063 hole, located in the southwest quadrant of Target IV. This Reverse Circulation (RC) hole revealed TREO results as high as 92,758 ppm from 10-to-12 metres, with a total weighted average of 38,655 ppm TREO from 0 to 24 metres, remaining open at depth." (See press release dated January 16, 2024 HERE)

Burega continued, "We have seen remarkable grades across Target IV, spanning from RC to DDH results. Numerous intercepts surpass 10,000 ppm TREO, including PCH-F01R, where the results support the ultra-high grade weathered profile. The team has identified two high-grade zones within Target IV, approximately 300 metres apart, interconnected with mineralization at shallow depths."

Figure 1 - Strip log of DDH PCH-F01R

Map 1 - Map of RC drilling location.

Image 1 - Photograph of Alkaline Breccia from DDH PCH-F01

Table 2 PCH-F01R collar details - SIRGAS 2000 - UTM zone 22S.

Appia is committed to transparent communication and will continue to provide timely updates on the progress of our exploration efforts and the development of a maiden Mineral Resource Estimate in partnership with SGS Canada. We are dedicated to sharing advancements in our exploration program and will release assay results from RC, DDH, and auger drilling as they become available.

Background on the PCH Project

The PCH Project is located within the Tocantins Structural Province in the Brasília Fold Belt, more specifically, the Arenópolis Magmatic Arc. The PCH Project is 40,963.18 hectares in size and located within the Goiás State of Brazil. It is classified as an alkaline intrusive rock occurrence with highly anomalous REE and Niobium mineralization. This mineralization is related to alkaline lithologies of the Fazenda Buriti Plutonic Complex and the hydrothermal and surface alteration products of this complex by supergene enrichment in a tropical climate. The positive results of the recent geochemical exploration work carried out to date indicates the potential for REEs, niobium (Nb), scandium (Sc) and cobalt (Co) within lateritic ionic adsorption clays.

QA/QC

The historic diamond drill holes, including DDH-PCHF01, are NQ size (47.6 mm diameter) vertical and reported intervals are true widths. It has been sampled at approximately one metre intervals, resulting in average sample sizes of approximately 1 - 5 kg. Drill core is geologically logged, photographed, marked for sampling and cut by diamond saw. One half of the core is taken for sampling at Appia's logging facility, bagged in a resistant plastic bag, labeled, photographed, and stored for shipment. The remaining half is stored at Appia's secure core storage facility.

Appia re-assayed the entire hole using pulp from original samples and updated nomenclature to PCH-F01R. The samples were sent to the SGS laboratory in Vespasiano, Minas Gerais. In addition to the internal QA/QC of the SGS Lab, Appia has used its own control samples in each batch sent to the laboratory.

Quality control samples, such as blanks, duplicates, and standards (CRM) are inserted into each analytical run. For all analysis methods, the minimum number of QA/QC samples is one standard, one duplicate and one blank, introduced every batch. The rigorous procedures implemented during the sample collection, preparation, and analysis stages underscore the robustness and reliability of the analytical results obtained.

All analytical results reported herein have passed internal QA/QC review and compilation. All assay results of DDH samples were provided by SGS Geosol, an ISO/IEC 17025:2005 certified laboratory, which performed their measure of the concentration of rare earth elements (REE) analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analytical methods.

The technical content in this news release was reviewed and approved by Mr. Don Hains, P.Geo, Consulting Geologist, and a Qualified Person as defined by National Instrument 43-101.

About Appia Rare Earths & Uranium Corp. (Appia)

Appia is a publicly traded Canadian company in the rare earth element and uranium sectors. The Company is currently focusing on delineating high-grade critical rare earth elements and gallium on the Alces Lake property, as well as exploring for high-grade uranium in the prolific Athabasca Basin on its Otherside, Loranger, North Wollaston, and Eastside properties. The Company holds the surface rights to exploration for 113,837.15 hectares (281,297.72 acres) in Saskatchewan. The Company also has a 100% interest in 13,008 hectares (32,143 acres), with rare earth elements and uranium deposits over five mineralized zones in the Elliot Lake Camp, Ontario. Lastly, the Company holds the right to acquire up to a 70% interest in the PCH Project (See June 9^th, 2023 Press Release - Click HERE) which is 40,963.18 ha. in size and located within the Goiás State of Brazil. (See January 11^th, 2023 Press Release - Click HERE)

Appia has 136.3 million common shares outstanding, 144.1 million shares fully diluted.

Cautionary note regarding forward-looking statements: This News Release contains forward-looking statements which are typically preceded by, followed by or including the words "believes", "expects", "anticipates", "estimates", "intends", "plans" or similar expressions. Forward-looking statements are not a guarantee of future performance as they involve risks, uncertainties and assumptions. We do not intend and do not assume any obligation to update these forward-looking statements and shareholders are cautioned not to put undue reliance on such statements.

Neither the Canadian Securities Exchange nor its Market Regulator (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.

For more information, visit .

As part of our ongoing effort to keep investors, interested parties and stakeholders updated, we have several communication portals. If you have any questions online (X, Facebook, LinkedIn) please feel free to send direct messages.

To book a one-on-one 30-minute Zoom video call, please click here.

Contact:

Tom Drivas, CEO and Director
(c) (416) 876-3957
(e) tdrivas@appiareu.com

Stephen Burega, President
(c) (647) 515-3734
(e) sburega@appiareu.com