share_log

Keysight Spotlights Spectrum Innovations at IMS 2024

Keysight Spotlights Spectrum Innovations at IMS 2024

Keysight在2024年的IMS展上聚焦於頻譜創新。
Keysight Technologies ·  06/04 12:00

What: At the 2024 IEEE MTT-S International Microwave Symposium (IMS), Keysight's microwave and radio frequency (RF) experts will showcase solutions that accelerate spectrum innovations to help customers optimize 5G and pioneer 6G. With an end-to-end portfolio of product development solutions that quickly solve design, emulation, and test challenges, Keysight is reducing risk and speeding time-to-market for satellite and IoT networks, massive MIMO antennas, and 6G technology.

什麼: 2024 IEEE MTT-S 國際微波研討會 (IMS),是德科技的微波和射頻(RF)專家將展示加速頻譜創新的解決方案,以幫助客戶優化5G和開拓6G。憑藉可快速解決設計、仿真和測試挑戰的端到端產品開發解決方案組合,是德科技正在降低風險並縮短衛星和物聯網網絡、大規模 MIMO 天線和 6G 技術的上市時間。

When: June 16 – 21, 2024

什麼時候: 2024 年 6 月 16 日至 21 日

Where: Keysight Booth Number 721, Walter E. Washington Convention Center Washington DC

在哪裏: 是德科技展位號 721,華盛頓特區沃爾特 E. 華盛頓會議中心

Contact: Paul Erwin to schedule media briefings and solution demonstrations.

聯繫人: 保羅·歐文 安排媒體發佈會和解決方案演示。

Keysight will present the following demonstrations that are accelerating spectrum innovations:

是德科技將展示以下加速頻譜創新的演示:

  • Wideband Active Load-Pull – Showcases Keysight's newly introduced wideband active load-pull (WALP) capability using a dual-channel VXG-C vector source and a PNA-X network analyzer to demonstrate the error vector magnitude performance of a power amplifier when presented with arbitrary frequency-dependent load impedances created without an impedance tuner.
  • AI/ML Enabled EDA – Demonstrates Keysight's ADS 2025, which offers 3D Circuit-EM-Thermal multi-physics co-design, high-performance automation enabling AI/ML and robust design validation for RF and millimeter-wave, and provides support for wideband power amplifier design techniques, including nonlinear load pull. Also shows how PathWave System Design 2024 U1 links to ADS through the new RF System Explorer as well as how ADS provides new communications PHY technology for 5G NTN systems design, while enabling training and use of AI/ML-based models, channels, provides RF-true phased array design for 5G and 6G systems.
  • Phased Array Antenna Test – Showcases Keysight's phased array control and calibration test solution inside the Vertical Compact Antenna Test Range (CATR), which accommodates a wide variety of phased array antenna performance verification tests including fast gain and phase calibration, effective isotropic radiated power (EIRP), antenna radiation pattern, antenna gain-to-noise-temperature (G/T), modulation distortion, and radio frequency to direct digital measurements.
  • Signal Source Characterization – Demonstrates how to perform sub-THz phase noise measurements with Keysight's new E5058A 54 GHz SSA-X signal source analyzer and an E5051AW phase noise measurement downconverter for 6G applications and microwave amplifier residual phase noise and AM noise measurements.
  • IQ Data Characterization – Highlights how Keysight's vector signal analysis software uses a new feature to precisely characterize a homodyne (IQ) systems by characterizing and digitally correcting the frequency-dependent dispersion and imbalance of a Marki IQ mixer.
  • 寬帶主動負載牽引 — 展示是德科技新推出的寬帶主動負載牽引 (WALP) 功能,該功能使用雙通道 VXG-C 矢量源和 PNA-X 網絡分析儀,演示功率放大器在沒有阻抗調諧器的情況下產生的任意頻率相關負載阻抗時的誤差矢量幅度性能。
  • 支持人工智能/機器學習的 EDA — 演示是德科技的 ADS 2025,它提供三維電路電磁熱多物理場協同設計、支持 AI/ML 的高性能自動化以及射頻和毫米波的可靠設計驗證,並支持寬帶功率放大器設計技術,包括非線性負載拉動。還展示了PathWave System Design 2024 U1如何通過新的射頻系統瀏覽器連接到ADS,以及ADS如何爲5G NTN系統設計提供新的通信物理層技術,同時支持基於人工智能/機器學習的模型和通道的訓練和使用,爲5G和6G系統提供真正的射頻相控陣設計。
  • 相控陣天線測試 — 在垂直緊湊型天線測試範圍 (CATR) 內展示是德科技的相控陣控制和校準測試解決方案,該解決方案可容納各種相控陣天線性能驗證測試,包括快速增益和相位校準、有效各向同性輻射功率 (EIRP)、天線輻射方向圖、天線增益噪聲溫度 (G/T)、調製失真以及用於指導數字測量的無線電頻率。
  • 信號源特性分析 — 演示如何使用是德科技全新 E5058A 54 GHz SSA-X 信號源分析儀和適用於 6G 應用的 E5051AW 相位噪聲測量下變頻器進行亞太赫茲的相位噪聲測量,以及微波放大器殘餘相位噪聲和 AM 噪聲測量。
  • IQ 數據特徵 — 重點介紹是德科技的矢量信號分析軟件如何使用一項新功能,通過表徵和數字校正Marki IQ混頻器的頻率相關色散和不平衡來精確地表徵零差(IQ)系統。

Keysight's experts will also explore spectrum innovation through technical lectures, presentations, workshops, and tutorials including:

是德科技的專家還將通過技術講座、演講、研討會和教程探索頻譜創新,包括:

Panel Sessions

小組會議

  • RF and Microwave League of Champions
  • 射頻和微波冠軍聯賽

June 17 – 8:00 a.m.-5:20 p.m.

6月17日—上午8點至下午5點20分

Room # 207AB

房間號 207AB

June 16 – 8:00-11:50 a.m.

6月16日 — 上午 8:00-11:50

Room # 206

206 號房間

Industry Workshops

行業研討會

  • Model-Based Design of Stable High Efficiency GaN Power Amplifiers
  • Design Flow for the Assembly and Analysis of 3D Heterogenours Intergrated Technologies
  • 基於模型的穩定高效氮化鎵功率放大器的設計
  • 三維異構集成技術裝配和分析的設計流程

MicroApps Seminars

微應用研討會

  • External Optimization and AI/ML Training of a 3GHz Filter Using Python in ADS
  • Using Load Pull Simulation and Optimization to Design Doherty Power Amplifiers
  • 在 ADS 中使用 Python 對 3GHz 濾波器進行外部優化和 AI/ML 訓練
  • 使用負載牽引仿真和優化來設計 Doherty 功率放大器

For additional information, visit Keysight at IMS 2024.

如需更多信息,請訪問 是德科技參加 IMS 2024

About Keysight Technologies

關於是德科技

At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we're delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product life cycle. We're a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com.

在是德科技(紐約證券交易所代碼:KEYS),我們激勵和授權創新者將改變世界的技術變爲現實。作爲一家標普500指數公司,我們正在提供市場領先的設計、仿真和測試解決方案,以幫助工程師在整個產品生命週期中以更低的風險更快地進行開發和部署。我們是全球創新合作伙伴,使通信、工業自動化、航空航天和國防、汽車、半導體和通用電子市場的客戶能夠加速創新,以連接和保護世界。要了解更多,請訪問 是德科技新聞編輯室www.keysigh

譯文內容由第三人軟體翻譯。


以上內容僅用作資訊或教育之目的,不構成與富途相關的任何投資建議。富途竭力但無法保證上述全部內容的真實性、準確性和原創性。
    搶先評論